The new API allows for sorted containers, insertion options, duplicate
handling options, and traversal order options.
* Adds the ability for containers to be sorted when they are created.
* Adds container creation options to handle duplicates when they are
inserted.
* Adds container creation option to insert objects at the beginning or end
of the container traversal order.
* Adds OBJ_PARTIAL_KEY to allow searching with a partial key. The partial
key works similarly to the OBJ_KEY flag. (The real search speed
improvement with this flag will come when red-black trees are added.)
* Adds container traversal and iteration order options: Ascending and
Descending.
* Adds an AST_DEVMODE compile feature to check the stats and integrity of
registered containers using the CLI "astobj2 container stats <name>" and
"astobj2 container check <name>". The channels container is normally
registered since it is one of the most important containers in the system.
* Adds ao2_iterator_restart() to allow iteration to be restarted from the
beginning.
* Changes the generic container object to have a v_method table pointer to
support other types of containers.
* Changes the container nodes holding objects to be ref counted.
The ref counted nodes and v_method table pointer changes pave the way to
allow other types of containers.
* Includes a large astobj2 unit test enhancement that tests the new
features.
(closes issue ASTERISK-19969)
Reported by: rmudgett
Review: https://reviewboard.asterisk.org/r/2078/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372997 65c4cc65-6c06-0410-ace0-fbb531ad65f3
With this option in use, it may be necessary to regulate your log files
externally.
(closes issue ASTERISK-20189)
Reported by: Jaco Kroon
Patches:
asterisk-logger-norotate-trunk.patch uploaded by Jaco Kroon (license 5671)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372976 65c4cc65-6c06-0410-ace0-fbb531ad65f3
message.c makes use of a special message queue channel that exists
in thread storage. This channel never goes away due to the fact that
the taskprocessor used by message.c does not get shut down, meaning
that it never ends the thread that stores the channel.
This patch fixes the problem by shutting down the taskprocessor when
Asterisk is shut down. In addition, the thread storage has a destructor
that will release the channel reference when the taskprocessor is destroyed.
(closes issue AST-937)
Reported by Jason Parker
Patches:
AST-937.patch uploaded by Mark Michelson (License #5049)
Tested by Jason Parker
........
Merged revisions 372885 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372888 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372891 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, The acknowledgement wasn't produced until after
executing the sip_poke_peer action actually responsible for
qualifying the peer. Now the response is given immediately once it is
known that a peer will be qualified and a SIPqualifypeerdone event
is issued when the process is finished. Thanks to OEJ for identifying
the problem and helping to come up with a solution.
(issue AST-969)
Reported by John Bigelow
Review: https://reviewboard.asterisk.org/r/2098/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372808 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Removes "res_rtp_asterisk.c:706: warning: dereferencing type-punned pointer
will break strict-aliasing rules" warning from the build on 32-bit platforms.
The problem is that 'size' was referenced aliased to both (pj_size_t *) and
(pj_ssize_t *). Now just make a copy of size that is the right type so there
isn't any pointer aliasing happening.
It also adds comments and asserts regarding what looks like an inappropriate
use of pj_sock_sendto, but is actually totally fine.
(closes issue ASTERISK-20368)
Reported by: Shaun Ruffell
Tested by: Michael L. Young
Patches:
0001-res_rtp_asterisk-Eliminate-type-punned-pointer-build.patch uploaded by Shaun Ruffell (license 5417)
slightly modified by David M. Lee.
........
Merged revisions 372777 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In r356604, SRTP handling was fixed to accomodate multiple crypto keys in an
SDP offer and the ability to re-create an SRTP session when the crypto keys
changed. In certain circumstances - most notably when a phone is put on
hold after having been bridged for a significant amount of time - the act
of re-creating the SRTP session causes problems for certain models of phones.
The patch committed in r356604 always re-created the SRTP session regardless
of whether or not the cryptographic keys changed. Since this is technically
not necessary, this patch modifies the behavior to only re-create the SRTP
session if Asterisk detects that the remote key has changed. This allows
models of phones that do not handle the SRTP session changing to continue
to work, while also providing the behavior needed for those phones that do
re-negotiate cryptographic keys.
(issue ASTERISK-20194)
Reported by: Nicolo Mazzon
Tested by: Nicolo Mazzon
Review: https://reviewboard.asterisk.org/r/2099
........
Merged revisions 372709 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372710 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372711 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372712 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The AMI action VoicemailUsersList VoicemailUserEntry event headers
ServerEmail and MailCommand did not report the global values if they were
not overridden. The VoicemailUserEntry event header ServerEmail was not
populated with the global value if the voicemail user did not override it.
The VoicemailUserEntry event header MailCommand was never populated with a
value.
* Removed unused struct ast_vm_user member mailcmd[].
(closes issue AST-973)
Reported by: John Bigelow
Tested by: rmudgett
........
Merged revisions 372620 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372621 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372622 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Fixes a build regression introduced in r369517 "Add support for ICE/STUN/TURN
in res_rtp_asterisk and chan_sip." [1].
[1] http://svnview.digium.com/svn/asterisk?view=revision&revision=369517
When compiling asterisk in parallel like:
$ make -j 10
It's possible to get errors like the following:
.pjlib-util-test-x86_64-unknown-linux-gnu.depend:120: *** missing separator. Stop.
make[4]: *** [depend] Error 2
make[3]: *** [dep] Error 1
make[2]: *** [/home/sruffell/asterisk-working/res/pjproject/pjnath/lib/libpjnath-x86_64-unknown-linux-gnu.a] Error 2
make[3]: warning: jobserver unavailable: using -j1. Add `+' to parent make rule.
This is because the build system is trying to build each of the libraries in
pjproject in parallel. Now the build will build pjproject in a single job and
link the results into res_asterisk_rtp.
Parallel builds, on one test system, saves ~1.5 minutes from a default Asterisk
build:
Single job:
$ git clean -fdx >/dev/null && time ( ./configure >/dev/null 2>&1 && make >/dev/null 2>&1 )
real 2m34.529s
user 1m41.810s
sys 0m15.970s
Parallel make:
$ git clean -fdx >/dev/null && time ( ./configure >/dev/null 2>&1 && make -j10 >/dev/null 2>&1 )
real 1m2.353s
user 2m39.120s
sys 0m18.850s
(closes issue ASTERISK-20362)
Reported by: Shaun Ruffel
Patches:
0001-res_asterisk_rtp-Fix-build-error-when-using-parallel.patch uploaded by Shaun Ruffel (License #5417)
........
Merged revisions 372609 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372610 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When MiniVM sends an e-mail and it has the volgain option set, it will spawn
sox in a separate process to handle the manipulation of the sound file. In
doing so, it creates a temporary file. There are two problems here:
1) The file descriptor returned from mkstemp is leaked
2) The finalfilename character pointer points to a buffer that loses scope
once volgain processing is finished.
Note that in r316265, Russell fixed some gcc warnings by using the return
value of the mkstemp call. A warning was placed in minivm that the file
descriptor was going to be leaked. This patch reverts that change, as it
handles the leak and 'uses' the file descriptor returned from mkstemp.
(closes issue ASTERISK-17133)
Reported by: Tzafrir Cohen
patches:
minivm_18501_demo.diff uploaded by Tzafrir Cohen (license #5035)
........
Merged revisions 372554 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372555 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372556 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372557 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Status: header in a QueueMemberStatus event (and other QueueMember* events)
is the numeric value of the device state corresponding to that Queue Member.
As those values are not exactly obvious, listing them in the documentation is
useful.
Matt Riddell reported this indirectly through the wiki page.
(closes issue ASTERISK-20243)
Reported by: Matt Riddell
........
Merged revisions 372531 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Using the AMI redirect action to take an ISDN call out of a parking lot
causes the MOH state to get confused. The redirect action does not take
the call off of hold. When the call is subsequently parked again, the
call no longer hears MOH.
* Make chan_dahdi/sig_pri restart MOH on repeated AST_CONTROL_HOLD frames
if it is already in a state where it is supposed to be sending MOH. The
MOH may have been stopped by other means. (Such as killing the generator.)
This simple fix is done rather than making the AMI redirect action post an
AST_CONTROL_UNHOLD unconditionally when it redirects a channel and thus
potentially breaking something with an unexpected AST_CONTROL_UNHOLD.
(closes issue ABE-2873)
Patches:
jira_abe_2873_c.3_bier.patch (license #5621) patch uploaded by rmudgett
........
Merged revisions 372521 from https://origsvn.digium.com/svn/asterisk/be/branches/C.3-bier
........
Merged revisions 372522 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372523 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r366547 introduced a change to the directmedia ACL for chan_sip which
modified the behavior significantly. Prior to the patch, this option would
bridge peers with directmedia if a peer's IP address matched its own
directmedia ACL. After that patch, the peer would check the bridged peer's
ACL instead. This change has been present since 1.8.14.0. That patched failed
to document the change in Upgrade.txt, so this patch adds mention of that
change to UPGRADE.txt (UPGRADE-1.8.txt in newer branches)
(issue AST-876)
........
Merged revisions 372471 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372472 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372473 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372474 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Consider a scenario where DUNDi peer PBX1 has two peers that are its neighbors,
PBX2 and PBX3, and where PBX2 and PBX3 are also neighbors. If the connection
is temporarily broken between PBX1 and PBX3, PBX1 should not include PBX3 in
the list of peers it sends to PBX2 in a DPDISCOVER message, as it cannot send
messages to PBX3. If it does, PBX2 will assume that PBX3 already received the
message and fail to forward the message on to PBX3 itself. This patch fixes
this by only including peers in a DPDISCOVER message that are reachable by the
sending node. This includes all peers with an empty address
(00:00:00:00:00:00) and that are have been reached by a qualify message.
This patch also prevents attempting to qualify a dynamic peer with an empty
address until that peer registers.
The patch uploaded by Peter was modified slightly for this commit.
(closes issue ASTERISK-19309)
Reported by: Peter Racz
patches:
dundi_routing.patch uploaded by Peter Racz (license 6290)
........
Merged revisions 372417 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372418 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372419 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372420 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When parsing a 'number' defined in followme.conf, FollowMe previously parsed
the number in the configuration file into a buffer with a length of 90
characters. This can artificially limit some parallel dial scenarios. This
patch allows for numbers of any length to be defined in the configuration
file.
Note that Clod Patry originally wrote a patch to fix this problem and received
a Ship It! on the JIRA issue. The patch originally expanded the buffer to 256
characters. Instead, the patch being committed duplicates the string in the
config file on the stack before parsing it for consumption by the application.
(closes issue ASTERISK-16879)
Reported by: Clod Patry
Tested by: mjordan
patches:
followme_no_limit.diff uploaded by Clod Patry (license #5138)
Slightly modified for this commit.
........
Merged revisions 372390 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372391 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372392 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372393 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The previous fix still would look in the static_RTP_PT table, which
is inappropriate since we specifically want to find a codec that has
been negotiated.
(closes issue ASTERISK-20296)
reported by NITESH BANSAL
Patches:
codec_negotiation.patch Uploaded by NITESH BANSAL (License #6418)
........
Merged revisions 372311 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372319 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This work comes courtesy of Pedro Kiefer (License #6407)
The work was posted to review board by Kaloyan Kovachev (License #5506)
(closes issue ASTERISK-16668)
Reported by Grant Crawshay
(closes issue ASTERISK-16694)
Reported by Fred van Lieshout
(closes issue ASTERISK-18417)
Reported by Kostas Liakakis
(closes issue ASTERISK-19435)
Reported by Deon George
(closes issue ASTERISK-20157)
Reported by Pedro Kiefer
(closes issue ASTERISK-20158)
Reported by Pedro Kiefer
(closes issue ASTERISK-20224)
Reported by Pedro Kiefer
Review: https://reviewboard.asterisk.org/r/2075
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372310 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes two memory leaks:
1. When find_user is called with NULL as its first parameter, the voicemail
user returned is allocated on the heap. The inboxcount2 function uses
find_user in such a fashion when counting new messages, and fails to free
the resulting voicemail user object.
2. When populate_defaults is called on a voicemail user, it wipes whatever
flags have been set on the object by copying over the global flags object.
If the VM_ALLOCED flag was ste on the voicemail user prior to doing so,
that flag is removed. This leaks the voicemail user when free_user is later
called.
(closes issue ASTERISK-19155)
Reported by: Filip Jenicek
patches:
asterisk.patch2 uploaded by Filip Jenicek (license 6277)
Patch slightly modified for this commit.
Review: https://reviewboard.asterisk.org/r/2096
........
Merged revisions 372268 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372288 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372289 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372302 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to 1.8, it was not necessary for an explicit "type" to be set for an
asterisk LDAP realtime peer. Now the routine find_peer actually checks the
type field during registration and fails to find the peer if it is not set.
The attached patch makes the realtime type equal whatever type is being
searched for if the type is 0 upon return from routine build_peer.
(closes issue ASTERISK-17222)
Reported by: John Covert
Patch by: David Vossel
Tested by: Darren Sessions
Review: https://reviewboard.asterisk.org/r/2095/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372290 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In Asterisk 1.4+, a fix was put in place to increment the sequence number for
retransmitted DTMF end packets. With the introduction of the RTP engine API in
1.8, the sequence number was no longer being incremented. This patch fixes this
regression as well as cleans up a few lines that were not doing anything.
(closes issue ASTERISK-20295)
Reported by: Nitesh Bansal
Tested by: Michael L. Young
Patches:
01_rtp_event_seq_num.patch uploaded by Nitesh Bansal (license 6418)
asterisk-20295-dtmf-fix-cleanup.diff uploaded by Michael L. Young (license 5026)
Review: https://reviewboard.asterisk.org/r/2083/
........
Merged revisions 372185 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372198 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372199 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372200 65c4cc65-6c06-0410-ace0-fbb531ad65f3
PQClear is not called when the result object of a call to PQExec has a
status of PGRES_COMMAND_OK. Interestingly enough, the off nominal case was
handled properly, so this memory leak only occurred when CEL records were
successfully written.
This patch properly clears the result in the nominal code path.
(closes issue ASTERISK-19991)
Reported by: Etienne Lessard
Tested by: Etienne Lessard
patches:
mem_leak_cel_pgsql.patch uploaded by Etienne Lessard (license #6394)
........
Merged revisions 372158 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 372165 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 372175 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372176 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this patch, if pause or unpause was issued on an interface
without specifying a specific queue, a PAUSEALL or UNPAUSEALL event
would be logged in the queue log even if that interface wasn't a
member of any queues. This patch changes it so that these events are
only logged when at least one member of any queue exists for that
interface.
(closes issue AST-946)
Reported by: John Bigelow
Review: https://reviewboard.asterisk.org/r/2079/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@372148 65c4cc65-6c06-0410-ace0-fbb531ad65f3
