When using the ListCategories AMI action, it was possible to traverse
upwards through the directories to files outside of the configured
configuration directory. This action is now restricted to the configured
directory and an error will now be returned if the specified file is
outside of this limitation.
Resolves: #GHSA-33x6-fj46-6rfh
UserNote: The ListCategories AMI action now restricts files to the
configured configuration directory.
Although C++ files (as extension .cc) have been handled in the module
directories for many years, the main directory was missing one line in its
Makefile that prevented C++ files from being recognised there.
Added a new option "unknown_tn_attest_level" to allow Identity
headers to be sent when a callerid TN isn't explicitly configured
in stir_shaken.conf. Since there's no TN object, a private_key_file
and public_cert_url must be configured in the attestation or profile
objects.
Since "unknown_tn_attest_level" uses the same enum as attest_level,
some of the sorcery macros had to be refactored to allow sharing
the enum and to/from string conversion functions.
Also fixed a memory leak in crypto_utils:pem_file_cb().
Resolves: #921
UserNote: You can now set the "unknown_tn_attest_level" option
in the attestation and/or profile objects in stir_shaken.conf to
enable sending Identity headers for callerid TNs not explicitly
configured.
The suppress_moh_on_sendonly endpoint option should have been
defined as OPT_BOOL_T in pjsip_configuration.c and AST_BOOL_VALUES
in the alembic script instead of OPT_YESNO_T and YESNO_VALUES.
Also updated contrib/ast-db-manage/README.md to indicate that
AST_BOOL_VALUES should always be used and provided an example.
Resolves: #995
Normally, when one party in a call sends Asterisk an SDP with
a "sendonly" or "inactive" attribute it means "hold" and causes
Asterisk to start playing MOH back to the other party. This can be
problematic if it happens at certain times, such as in a 183
Progress message, because the MOH will replace any early media you
may be playing to the calling party. If you set this option
to "yes" on an endpoint and the endpoint receives an SDP
with "sendonly" or "inactive", Asterisk will NOT play MOH back to
the other party.
Resolves: #979
UserNote: The new "suppress_moh_on_sendonly" endpoint option
can be used to prevent playing MOH back to a caller if the remote
end sends "sendonly" or "inactive" (hold) to Asterisk in an SDP.
The tenantid field was originally added to the ast_sip_endpoint
structure at the end of the AST_DECLARE_STRING_FIELDS block. This
caused everything after it in the structure to move down in memory
and break ABI compatibility. It's now at the end of the structure
as an AST_STRING_FIELD_EXTENDED. Given the number of string fields
in the structure now, the initial string field allocation was
also increased from 64 to 128 bytes.
Resolves: #982
Adds the 'D' option to app_mixmonitor that interleaves the input and
output frames of the channel being recorded in the monitor output frame.
This allows for two streams in the recording: the transmitted audio and
the received audio. The 't' and 'r' options are compatible with this.
Fixes: #945
UserNote: The MixMonitor application now has a new 'D' option which
interleaves the recorded audio in the output frames. This allows for
stereo recording output with one channel being the transmitted audio and
the other being the received audio. The 't' and 't' options are
compatible with this.
When the channel tech is multistream capable, the reference to
chan_topology was passed to the new channel. When the channel tech
isn't multistream capable, the reference to chan_topology was never
released. "Local" channels are multistream capable so it didn't
affect them but the confbridge "CBAnn" and the bridge_media
"Recorder" channels are not so they caused a leak every time one
of them was created.
Also added tracing to ast_stream_topology_alloc() and
stream_topology_destroy() to assist with debugging.
Resolves: #938
attest_level, send_mky and check_tn_cert_public_url weren't
propagating correctly from the attestation object to the profile
and tn.
* In the case of attest_level, the enum needed to be changed
so the "0" value (the default) was "NOT_SET" instead of "A". This
now allows the merging of the attestation object, profile and tn
to detect when a value isn't set and use the higher level value.
* For send_mky and check_tn_cert_public_url, the tn default was
forced to "NO" which always overrode the profile and attestation
objects. Their defaults are now "NOT_SET" so the propagation
happens correctly.
* Just to remove some redundant code in tn_config.c, a bunch of calls to
generate_sorcery_enum_from_str() and generate_sorcery_enum_to_str() were
replaced with a single call to generate_acfg_common_sorcery_handlers().
Resolves: #904
The app is actually named "BackGround" but several references
in XML documentation were spelled "Background" with the lower
case "g". This was causing documentation links to return
"not found" messages.
Consumers like media_cache have been running into issues with
the previous astdb "/family/key" limit of 253 bytes when needing
to store things like long URIs. An Amazon S3 URI is a good example
of this. Now, instead of using a static 256 byte buffer for
"/family/key", we use ast_asprintf() to dynamically create it.
Both test_db.c and test_media_cache.c were also updated to use
keys/URIs over the old 253 character limit.
Resolves: #881
UserNote: The `ast_db_*()` APIs have had the 253 byte limit on
"/family/key" removed and will now accept families and keys with a
total length of up to SQLITE_MAX_LENGTH (currently 1e9!). This
affects the `DB*` dialplan applications, dialplan functions,
manager actions and `databse` CLI commands. Since the
media_cache also uses the `ast_db_*()` APIs, you can now store
resources with URIs longer than 253 bytes.
verification.c had an include for jansson.h left over from previous
versions of the module. Since res_stir_shaken no longer has a
dependency on jansson, the bundled version wasn't added to GCC's
include path so if you didn't also have a jansson development package
installed, the compile would fail. Removing the stale include
was the only thing needed.
Resolves: #889
* If the call to ast_config_load() returns CONFIG_STATUS_FILEINVALID,
check_for_old_config() now returns LOAD_DECLINE instead of continuing
on with a bad pointer.
* If CONFIG_STATUS_FILEMISSING is returned, check_for_old_config()
assumes the config is being loaded from realtime and now returns
LOAD_SUCCESS. If it's actually not being loaded from realtime,
sorcery will catch that later on.
* Also refactored the error handling in load_module() a bit.
Resolves: #884
For both attestation and verification, we now check whether they've
been disabled either globally or by the profile before validating
things like callerid, orig_tn, dest_tn, etc. This prevents useless
error messages.
Resolves: #879
The ub_result pointer passed to unbound_resolver_callback by
libunbound can be NULL if the query was for something malformed
like `.1` or `[.1]`. If it is, we now set a 'ns_r_formerr' result
and return instead of crashing with a SEGV. This causes pjproject
to simply cancel the transaction with a "No answer record in the DNS
response" error. The existing "off nominal" unit test was also
updated to check this condition.
Although not necessary for this fix, we also made
ast_dns_resolver_completed() tolerant of a NULL result.
Resolves: GHSA-v428-g3cw-7hv9
When commit e8c9cb80 was cherry-picked in from master, the
fact that the 20 and 18 branches still had the old "macrocontext"
column wasn't taken into account so the number of named parameters
didn't match the number of '?' placeholders. They do now.
We also now use ast_asprintf to create the full mailbox query SQL
statement instead of trying to calculate the proper length ourselves.
Resolves: #831
* A static array of security mechanism type names was created.
* ast_sip_str_to_security_mechanism_type() was refactored to do
a lookup in the new array instead of using fixed "if/else if"
statments.
* security_mechanism_to_str() and ast_sip_security_mechanisms_to_str()
were refactored to use ast_str instead of a fixed length buffer
to store the result.
* ast_sip_security_mechanism_type_to_str was removed in favor of
just referencing the new type name array. Despite starting with
"ast_sip_", it was a static function so removing it doesn't affect
ABI.
* Speaking of "ast_sip_", several other static functions that
started with "ast_sip_" were renamed to avoid confusion about
their public availability.
* A few VECTOR free loops were replaced with AST_VECTOR_RESET().
* Fixed a meomry leak in pjsip_configuration.c endpoint_destructor
caused by not calling ast_sip_security_mechanisms_vector_destroy().
* Fixed a memory leak in res_pjsip_outbound_registration.c
add_security_headers() caused by not specifying OBJ_NODATA in
an ao2_callback.
* Fixed a few ao2_callback return code misuses.
Resolves: #845
Add dialplan application PJSIPNOTIFY to send either pre-configured
NOTIFY messages from pjsip_notify.conf or with headers defined in
dialplan.
Also adds the ability to send pre-configured NOTIFY commands to a
channel via the CLI.
Resolves: #799
UserNote: A new dialplan application PJSIPNotify is now available
which can send SIP NOTIFY requests from the dialplan.
The pjsip send notify CLI command has also been enhanced to allow
sending NOTIFY messages to a specific channel. Syntax:
pjsip send notify <option> channel <channel>
If you run an AMI CoreShowChannelMap on a channel that isn't in a
bridge and you're in DEVMODE, you can get a FRACK because the
bridge id is empty. We now simply return an empty list for that
request.
This patch introduces a new identifier for channels: tenantid. It's
a stringfield on the channel that can be used for general purposes. It
will be inherited by other channels the same way that linkedid is.
You can set tenantid in a few ways. The first is to set it in the
dialplan with the Set and CHANNEL functions:
exten => example,1,Set(CHANNEL(tenantid)=My tenant ID)
It can also be accessed via CHANNEL:
exten => example,2,NoOp(CHANNEL(tenantid))
Another method is to use the new tenantid option for pjsip endpoints in
pjsip.conf:
[my_endpoint]
type=endpoint
tenantid=My tenant ID
This is considered the best approach since you will be able to see the
tenant ID as early as the Newchannel event.
It can also be set using set_var in pjsip.conf on the endpoint like
setting other channel variable:
set_var=CHANNEL(tenantid)=My tenant ID
Note that set_var will not show tenant ID on the Newchannel event,
however.
Tenant ID has also been added to CDR. It's read-only and can be accessed
via CDR(tenantid). You can also get the tenant ID of the last channel
communicated with via CDR(peertenantid).
Tenant ID will also show up in CEL records if it has been set, and the
version number has been bumped accordingly.
Fixes: #740
UserNote: tenantid has been added to channels. It can be read in
dialplan via CHANNEL(tenantid), and it can be set using
Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to
use the new tenantid option for pjsip endpoints (e.g., tenantid=My
tenant ID) so that it will show up in Newchannel events. You can set it
like any other channel variable using set_var in pjsip.conf as well, but
note that this will NOT show up in Newchannel events. Tenant ID is also
available in CDR and can be accessed with CDR(tenantid). The peer tenant
ID can also be accessed with CDR(peertenantid). CEL includes tenant ID
as well if it has been set.
UpgradeNote: A new versioned struct (ast_channel_initializers) has been
added that gets passed to __ast_channel_alloc_ap. The new function
ast_channel_alloc_with_initializers should be used when creating
channels that require the use of this struct. Currently the only value
in the struct is for tenantid, but now more fields can be added to the
struct as necessary rather than the __ast_channel_alloc_ap function. A
new option (tenantid) has been added to endpoints in pjsip.conf as well.
CEL has had its version bumped to include tenant ID.
Added Reload and DBdeltree to the list of dialplan application that
can't be executed via the Originate manager action without also
having write SYSTEM permissions.
Added CURL, DB*, FILE, ODBC and REALTIME* to the list of dialplan
functions that can't be executed via the Originate manager action
without also having write SYSTEM permissions.
If the Queue application is attempted to be run by the Originate
manager action and an AGI parameter is specified in the app data,
it'll be rejected unless the manager user has either the AGI or
SYSTEM permissions.
Resolves: #GHSA-c4cg-9275-6w44
Previously, on command execution, the control thread was awoken by
sending a SIGURG. It was found that this still resulted in some
instances where the thread was not immediately awoken.
This change instead sends a null frame to awaken the control thread,
which awakens the thread more consistently.
Resolves: #801
* Fixed a bug in crypto_show_cli_store that was causing asterisk
to crash if there were certificate revocation lists in the
verification certificate store. We're also now prefixing
certificates with "Cert:" and CRLs with "CRL:" to distinguish them
in the list.
* Added 'untrusted_cert_file' and 'untrusted_cert_path' options
to both verification and profile objects. If you have CRLs that
are signed by a different CA than the incoming X5U certificate
(indirect CRL), you'll need to provide the certificate of the
CRL signer here. Thse will show up as 'Untrusted" when showing
the verification or profile objects.
* Fixed loading of crl_path. The OpenSSL API we were using to
load CRLs won't actually load them from a directory, only a file.
We now scan the directory ourselves and load the files one-by-one.
* Fixed the verification flags being set on the certificate store.
- Removed the CRL_CHECK_ALL flag as this was causing all certificates
to be checked for CRL extensions and failing to verify the cert if
there was none. This basically caused all certs to fail when a CRL
was provided via crl_file or crl_path.
- Added the EXTENDED_CRL_SUPPORT flag as it is required to handle
indirect CRLs.
* Added a new CLI command...
`stir_shaken verify certificate_file <certificate_file> [ <profile> ]`
which will assist troubleshooting certificate problems by allowing
the user to manually verify a certificate file against either the
global verification certificate store or the store for a specific
profile.
* Updated the XML documentation and the sample config file.
Resolves: #809
The way we have been initializing the config wizard prevented it
from registering its objects if res_pjsip happened to load
before it.
* We now use the object_type_registered sorcery observer to kick
things off instead of the wizard_mapped observer.
* The load_module function now checks if res_pjsip has been loaded
already and if it was it fires the proper observers so the objects
load correctly.
Resolves: #816
UserNote: The res_pjsip_config_wizard.so module can now be reloaded.
softmix_bridge_write_control() now calls ast_bridge_queue_everyone_else()
with the bridge_channel so the VIDUPDATE control frame isn't echoed back.
softmix_bridge_write_control() was setting bridge_channel to NULL
when calling ast_bridge_queue_everyone_else() for VIDUPDATE control
frames. This was causing the frame to be echoed back to the
channel it came from. In certain cases, like when two channels or
bridges are being recorded, this can cause a ping-pong effect that
floods the system with VIDUPDATE control frames.
Resolves: #780
This commit adds a new voicemail.conf option 'odbc_audio_on_disk'
which when set causes the ODBC variant of app_voicemail to leave
the message and greeting audio files on disk and only store the
message metadata in the database. This option came from a concern
that the database could grow to large and cause remote access
and/or replication to become slow. In a clustering situation
with this option, all asterisk instances would share the same
database for the metadata and either use a shared filesystem
or other filesystem replication service much more suitable
for synchronizing files.
The changes to app_voicemail to implement this feature were actually
quite small but due to the complexity of the module, the actual
source code changes were greater. They fall into the following
categories:
* Tracing. The module is so complex that it was impossible to
figure out the path taken for various scenarios without the addition
of many SCOPE_ENTER, SCOPE_EXIT and ast_trace statements, even in
code that's not related to the functional change. Making this worse
was the fact that many "if" statements in this module didn't use
braces. Since the tracing macros add multiple statements, many "if"
statements had to be converted to use braces.
* Excessive use of PATH_MAX. Previous maintainers of this module
used PATH_MAX to allocate character arrays for filesystem paths
and SQL statements as though they cost nothing. In fact, PATH_MAX
is defined as 4096 bytes! Some functions had (and still have)
multiples of these. One function has 7. Given that the vast
majority of installations use the default spool directory path
`/var/spool/asterisk/voicemail`, the actual path length is usually
less than 80 bytes. That's over 4000 bytes wasted. It was the
same for SQL statement buffers. A 4K buffer for statement that
only needed 60 bytes. All of these PATH_MAX allocations in the
ODBC related code were changed to dynamically allocated buffers.
The rest will have to be addressed separately.
* Bug fixes. During the development of this feature, several
pre-existing ODBC related bugs were discovered and fixed. They
had to do with leaving orphaned files on disk, not preserving
original message ids when moving messages between folders,
not honoring the "formats" config parameter in certain circumstances,
etc.
UserNote: This commit adds a new voicemail.conf option
'odbc_audio_on_disk' which when set causes the ODBC variant of
app_voicemail_odbc to leave the message and greeting audio files
on disk and only store the message metadata in the database.
Much more information can be found in the voicemail.conf.sample
file.
The `Require: mediasec` and `Proxy-Require: mediasec` headers need
to be sent whenever we send `Security-Client` or `Security-Verify`
headers but the logic to do that was only in add_security_headers()
in res_pjsip_outbound_register. So while we were sending them on
REGISTER requests, we weren't sending them on INVITE requests.
This commit moves the logic to send the two headers out of
res_pjsip_outbound_register:add_security_headers() and into
security_agreement:ast_sip_add_security_headers(). This way
they're always sent when we send `Security-Client` or
`Security-Verify`.
Resolves: #789
