This change extends the Sorcery API to allow a wizard to be
told to explicitly reload objects or a specific object type
even if the wizard believes that nothing has changed.
This has been leveraged by res_pjsip and res_pjsip_acl to
reload endpoints and PJSIP ACLs when a named ACL changes.
ASTERISK-28697
Change-Id: Ib8fee9bd9dd490db635132c479127a4114c1ca0b
Added ability to specifiy a wizard is read-only when applying
it to a specific object type. This allows you to specify
create, update and delete callbacks for the wizard but limit
which object types can use them.
Added the ability to allow an object type to have multiple
wizards of the same type. This is indicated when a wizard
is added to a specific object type.
Added 3 new sorcery wizard functions:
* ast_sorcery_object_type_insert_wizard which does the same thing
as the existing ast_sorcery_insert_wizard_mapping function but
accepts the new read-only and allot-duplicates flags and also
returns the ast_sorcery_wizard structure used and it's internal
data structure. This allows immediate use of the wizard's
callbacks without having to register a "wizard mapped" observer.
* ast_sorcery_object_type_apply_wizard which does the same
thing as the existing ast_sorcery_apply_wizard_mapping function
but has the added capabilities of
ast_sorcery_object_type_insert_wizard.
* ast_sorcery_object_type_remove_wizard which removes a wizard
matching both its name and its original argument string.
* The original logic in __ast_sorcery_insert_wizard_mapping was moved
to __ast_sorcery_object_type_insert_wizard and enhanced for the
new capabilities, then __ast_sorcery_insert_wizard_mapping was
refactored to just call __ast_sorcery_insert_wizard_mapping.
* Added a unit test to test_sorcery.c to test the read-only
capability.
Change-Id: I40f35840252e4313d99e11dbd80e270a3aa10605
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
These macros have been documented as legacy for a long time but are
still used in new code because they exist. Remove all references to:
* ao2_container_alloc_options
* ao2_t_container_alloc_options
* ao2_t_container_alloc
These macro's are still available for use but only in modules. Only
ao2_container_alloc remains due to it's use in over 100 places.
Change-Id: I1a26258b5bf3deb081aaeed11a0baa175c933c7a
When built-in components of Asterisk fail to start they cause the
Asterisk startup to abort. In these cases only the most critical
cleanup should be performed - closing databases and terminating
proceses. These cleanups are registered using ast_register_atexit, all
other cleanups should not be run during startup abort.
The main reason for this change is that these cleanup procedures are
untestable from the partially initialized states, if they fail it could
prevent us from ever running the critical cleanup with ast_run_atexits.
Change-Id: Iecc2df98008b21509925ff16740bd5fa29527db3
This uses AO2_STRING_FIELD_HASH_FN and AO2_STRING_FIELD_CMP_FN where
possible in the Asterisk core.
This removes CMP_STOP from the result of CMP_FN callbacks for the
following structure types:
* ast_bucket_metadata
* ast_bucket_scheme
* generic_monitor_instance_list (ccss.c)
* named_acl
Change-Id: Ide4c1449a894bce70dea1fef664dade9b57578f1
Some consumers of the sorcery API use ast_sorcery_retrieve_by_regex
only so that they can anchor the potential match as a prefix and not
because they truly need regular expressions.
Rather than using regular expressions for simple prefix lookups, add
a new operation - ast_sorcery_retrieve_by_prefix - that does them.
Patches against 13 and 15 have a compatibility layer needed to
maintain ABI that is not needed in master.
Change-Id: I56f4e20ba1154bd52281f995c27a429a854f6a79
Return early if ast_sorcery_retrieve_by_id() is not passed an id to find.
Also eliminated the RAII_VAR() usage in the function.
Change-Id: I871dbe162a301b5ced8b4393cec27180c7c6b218
* Remove some unused parameters from internal functions:
sorcery_wizard_create()
sorcery_wizard_update()
sorcery_wizard_delete()
* Created the struct sorcery_observer_invocation ao2 object without a lock
since it is not needed in sorcery_observer_invocation_alloc().
* Cleanup generic ao2 container sorcery object id hash, sort, and cmp
functions.
Change-Id: Iff71d75f52bc1b8cee955456838c149faaa4f92e
A non-existent constraint was being referenced in the upgrade script.
This patch corrects the problem by removing the reference.
This patch fixes another realtime problem as well. Our Alembic scripts
store booleans as yes or no values. However, Sorcery tries to insert
"true" or "false" instead. This patch updates Sorcery to use "yes" and
"no"
ASTERISK-26128 #close
Change-Id: I366dbbf91418a9cb160b3ca74b0e59b5ac284bec
Sorcery creates taskprocessors for object types to process object observer
callbacks. An API call is needed to be able to set the congestion levels
of these taskprocessors for selected object types.
* Updated PJSIP's contact and contact_status sorcery object type observer
default congestion levels based upon stress testing. Increased the
congestion levels to reduce the potential for bursty register/unregister
and subscribe/unsubscribe activity from triggering the taskprocessor
overload alert.
ASTERISK-26088
Reported by: Richard Mudgett
Change-Id: I4542e83b556f0714009bfeff89505c801f1218c6
The ast_sorcery_create, update and delete function have been refactored
to better deal with caches and errors.
The action is now called on all non-caching wizards first. If ANY succeed,
the action is called on all caching wizards and the observers are notified.
This way we don't put something in the cache (or update or delete) before
knowing the action was performed in at least 1 backend and we only call the
observers once even if there were multiple writable backends.
ast_sorcery_create was never adding to caches in the first place which
was preventing contacts from getting added to a memory_cache when they
were created. In turn this was causing memory_cache to emit errors if
the contact was deleted before being retrieved (which would have
populated the cache).
ASTERISK-25811 #close
Reported-by: Ross Beer
Change-Id: Id5596ce691685a79886e57b0865888458d6e7b46
This change introduces the configuration option 'full_backend_cache'
which changes the cache to be a full mirror of the backend instead
of a per-object cache. This allows all sorcery retrieval operations
to be carried out against it and is useful for object types which
are used in a "retrieve all" or "retrieve some" pattern.
ASTERISK-25625 #close
Change-Id: Ie2993487e9c19de563413ad5561c7403b48caab5
When allocating a sorcery object, fail if the
id value was not allocated.
ASTERISK-25323
Reported by: Scott Griepentrog
Change-Id: I152133fb7545a4efcf7a0080ada77332d038669e
If a sorcery wizard does not support one of the 'optional' CRUD
operations (namely the CUD), log a WARNING message so we are aware of
why the operation failed. This also removes an assert in this case, as
the CUD operation may have been triggered by an external system, in
which case it is not a programming error but a configuration error.
Change-Id: Ifecd9df946d9deaa86235257b49c6e5e24423b53
Some individual fields may fail their conversion due to their default
values being invalid for their custom handlers. In particular,
configuration values that depend on others being enabled (and thus have
an empty default value) are notorious for tripping this routine up. An
example of this are any of the DTLS options for endpoints. Any of the
DTLS options will fail to be applied (as DTLS is not enabled), causing
the entire object set to be aborted.
This patch makes it so that we log a debug message when skipping a
field, and rumble on anyway.
ASTERISK-25238
Change-Id: I0bea13de79f66bf9f9ae6ece0e94a2dc1c026a76
Gerrit is complaining of conflicts when trying to create a patch series
of all of the cherry-picked master commits, so I have instead squashed
it all into one commit.
ASTERISK-25067 #close
Reported by: Matt Jordan
Change-Id: I6dda90343fae24a75dc5beec84980024e8d61eb9
When a mapping does not exist between a sorcery.conf defined object and
a realtime mapping in extconf, currently, the user will receive a slew
of ERROR messages that don't really tell what is happening. Some ERROR
messages may even be misleading, as they occur after the sorcery API has
already given up on the attempt to load and create the sorcery object.
This patch adds a bit of debug and a useful WARNING message for when a
wizard's open callback fails for a particular object type. In the bad
configurations that resulted in this patch, this provided a 'root cause'
WARNING message that pointed in the right direction of the configuration
problem.
Change-Id: I1cc7344f2b015b8b9c85a7e6ebc8cb4753a8f80b
Find and unlink the specified sorcery object type to complement
ast_sorcery_object_register(). Without this function you cannot
completely unload individual modules that use sorcery for configuration.
ASTERISK-24907
Reported by: Kevin Harwell
Change-Id: I1c04634fe9a90921bf676725c7d6bb2aeaab1c88
The cache creation callback function expects to receive a sorcery_details
structure and not just a standalone object.
Change-Id: I3e4a5a137cb25292eb52d7a14cbb6daa09213450
Currently you can 'apply' a wizard to an object type but the wizard
always goes at the end of the object type's wizard list. This patch
adds a new ast_sorcery_insert_wizard_mapping function that allows
you to insert a wizard anyplace in the list. I.E. You could
add a caching wizard to an object type and place it before all
wizards.
ast_sorcery_get_wizard_mapping_count and
ast_sorcery_get_wizard_mapping were added to allow examination
of the mapping list.
ast_sorcery_remove_mapping was added to remove a mapping by name.
As part of this patch, the object type's wizard list was converted
from an ao2_container to an AST_VECTOR_RW.
A new test was added to test_sorcery for this capability.
ASTERISK-25044 #close
Change-Id: I9d2469a9296b2698082c0989e25e6848dc403b57
Since 'core stop now' and 'core restart now' do not stop modules,
it is unsafe for most of the core to run cleanups. Originally all
cleanups used ast_register_atexit, and were only changed when it
was shown to be unsafe. ast_register_atexit is now used only when
absolutely required to prevent corruption and close child processes.
Exceptions that need to use ast_register_atexit:
* CDR: Flush records.
* res_musiconhold: Kill external applications.
* AstDB: Close the DB.
* canary_exit: Kill canary process.
ASTERISK-24142 #close
Reported by: David Brillert
ASTERISK-24683 #close
Reported by: Peter Katzmann
ASTERISK-24805 #close
Reported by: Badalian Vyacheslav
ASTERISK-24881 #close
Reported by: Corey Farrell
Review: https://reviewboard.asterisk.org/r/4500/
Review: https://reviewboard.asterisk.org/r/4501/
........
Merged revisions 433495 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433497 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Valgrind found a memory leak and invalid access.
* Fix invalid access by sscanf() being fed a non-nul terminated string of
digits in res/res_pjsip_sdp_rtp.c:get_codecs().
* Fix memory leak in main/sorcery.c:sorcery_object_field_destructor().
* Fix potential NULL pointer dereference in
main/xmldoc.c:xmldoc_get_syntax_config_option().
Review: https://reviewboard.asterisk.org/r/4513/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@433199 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The act of defining wizards for an object type in sorcery.conf will
create a minimal object type. This can cause a problem when a module
has multiple sorcery instances (which all get the wizards from sorcery.conf
applied) but the sorcery instances do not all contain full information
about the object types. Upon loading errors will occur stating that
the objects can not be created. This is confusing and is actually
perfectly fine.
This change makes it so that only object types which have been fully
defined will be loaded.
ASTERISK-24748 #close
Reported by: Joshua Colp
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Performing a CLI "module reload" command when there are new pjsip.conf
registration objects defined frequently failed to load them correctly.
What happens is a race condition between res_pjsip pushing its reload into
an asynchronous task processor task and the thread that does the rest of
the reloads when it gets to reloading the res_pjsip_outbound_registration
module. A similar race condition happens between a reload and the CLI/AMI
show registrations commands. The reload updates the current_states
container and the CLI/AMI commands call get_registrations() which builds a
new current_states container.
* Made res_pjsip.c reload_module() use ast_sip_push_task_synchronous()
instead of ast_sip_push_task() to eliminate two threads processing config
reloads at the same time.
* Made get_registrations() not replace the global current_states container
so the CLI/AMI show registrations command cannot interfere with reloading.
You could never add/remove objects in the container without the
possibility of the container being replaced out from under you by
get_registrations().
* Added a registration loaded sorcery instance observer to purge any dead
registration objects since get_registrations() cannot do this job anymore.
The struct ast_sorcery_instance_observer callbacks must be used because
the callback happens inline with the load process. The struct
ast_sorcery_observer callbacks are pushed to a different thread.
* Added some global current_states NULL pointer checks in case the
container disappears because of unload_module().
* Made sorcery's struct ast_sorcery_instance_observer.object_type_loaded
callbacks guaranteed to be called before any struct
ast_sorcery_observer.loaded callbacks will be called.
* Moved the check for non-reloadable objects to before the sorcery
instance loading callbacks happen to short circuit unnecessary work.
Previously with non-reloadable objects, the sorcery instance
loading/loaded callbacks would always happen, the individual wizard
loading/loaded would be prevented, and the non-reloadable type logging
message would be logged for each associated wizard.
ASTERISK-24729 #close
Review: https://reviewboard.asterisk.org/r/4381/
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@431243 65c4cc65-6c06-0410-ace0-fbb531ad65f3
As a result of https://reviewboard.asterisk.org/r/3305, res_sorcery_realtime
was tossing database fields that didn't have an exact match to a sorcery
registered field. This broke the ability to use regexes as field names which
manifested itself as a failure of res_pjsip_phoneprov_provider which uses
this capability. It also broke handling of fields that start with '@' in
realtime but I don't think anyone noticed.
This patch does the following...
* Modifies ast_sorcery_fields_register to pre-compile the name regex.
* Modifies ast_sorcery_is_object_field_registered to test the regex if it
exists instead of doing an exact strcmp.
* Modifies res_pjsip_phoneprov_provider with a few tweaks to get it to work
with realtime.
Tested-by: George Joseph
Review: https://reviewboard.asterisk.org/r/4185/
........
Merged revisions 428543 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit contains several changes to sorcery:
1) Application of sorcery configuration based on module name is automatically performed
when sorcery is opened for a module.
2) Sorcery will not attempt to apply the same wizard to an object type more than once.
3) Sorcery gives more exact results when attempting to apply a wizard, whether as the
default or based on configuration.
Sorcery unit tests still pass for me after making these changes.
Review: https://reviewboard.asterisk.org/r/3326
........
Merged revisions 411159 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411656 65c4cc65-6c06-0410-ace0-fbb531ad65f3
On graceful shutdown, sorcery wizards are all killed off, but it is
possible for sorcery instances to still have dangling pointers after
this, possibly causing a crash. Giving the sorcery instances a reference
to their wizards ensures that the wizard reference will remain valid for
the lifetime of the sorcery instance.
Review: https://reviewboard.asterisk.org/r/3401
........
Merged revisions 411295 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@411296 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Playing back a file to a channel in an ARI bridge would attempt to wait until
the playback concluded before returning. The method used involved signaling the
waiting thread in the ARI custom playback function.
The problem with this is that there were some corner cases that were not accounted for:
* If a bridge channel could not be found, then we never would attempt the playback but
would still attempt to wait for the playback to complete.
* If the bridge playfile action failed to queue, we would still attempt to wait for the
playback to complete.
* If the bridge playfile action were queued but some circumstance caused the playback
not to occur (the bridge dies, the channel is removed from the bridge), then we would
never be notified.
The solution to this is to move the waiting logic into the bridge code. A new bridge
API function is added to queue a synchronous action on a bridge. The waiting thread
is notified when the queued frame has been freed, either due to an error occurring
or due to successful playback. As a failsafe, the waiting thread has a 10 minute
timeout just in case there is a frame leak somewhere.
Review: https://reviewboard.asterisk.org/r/3338
........
Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the 'pjsip show channel' and 'pjsip show contact' commands.
Refactored out the hated ast_hashtab. Replaced with ao2_container.
Cleaned up function naming. Internal only, no public name changes.
Cleaned up whitespace and brace formatting in cli code.
Changed some NULL checking from "if"s to ast_asserts.
Fixed some register/unregister ordering to reduce deadlock potential.
Fixed ast_sip_location_add_contact where the 'name' buffer was too short.
Fixed some self-assignment issues in res_pjsip_outbound_registration.
(closes issue ASTERISK-23276)
Review: http://reviewboard.asterisk.org/r/3283/
........
Merged revisions 410287 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to prevent confusion over the allow and disallow
list of codecs being the same an option for registering a
field as an alias is added. The alias field will be read
from the configuration file, but afterwards is not listed
as a known field. With disallow set as an alias, the CLI
command pjsip show endpoint # will list the allow= field,
but not the disallow field.
(closes issue ASTERISK-23092)
Review: https://reviewboard.asterisk.org/r/3193/
........
Merged revisions 410190 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file. It's similar to
AST_CONFIG.
The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects. The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify. You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...
* Creates ast_variable_list_append which is a helper to append one ast_variable
list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
type preference...a single ast_variable with all values concatenated or an
ast_variable list with multiple entries. Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
sorcery_fields_handler handlers so they return multiple occurrences as an
ast_variable_list.
* Added a whole bunch of tests to test_sorcery.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed off-nominal json ref counting issue with using the following API
calls: ast_json_object_set() and ast_json_array_append().
* Fixed off-nominal error reporting in ast_ari_endpoints_list().
* Fixed some miscellaneous off-nominal json ref counting issues in
report_receive_fax_status() and dial_to_json().
........
Merged revisions 408713 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408714 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to retrieve an arbitrary sorcery instance from a dialplan function
(or any place else) there needs to be a registry of sorcery instances.
ast_sorcery_init now creates a hashtab as a registry.
ast_sorcery_open now checks the hashtab for an existing sorcery instance
matching the caller's module name. If it finds one, it bumps the
refcount and returns it. If not, it creates a new sorcery instance,
adds it to the hashtab, then returns it.
ast_sorcery_retrieve_by_module_name is a new function that does a hashtab
lookup by module name. It can be called by the future dialplan function.
res_pjsip/config_system needed a small change to share the main res_pjsip
sorcery instance.
tests/test_sorcery was updated to include a test for the registry.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3184/
........
Merged revisions 408518 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@408519 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change adds improvements to support for allow=all in
pjsip.conf so that it functions as intended. Previously,
the allow/disallow socery configuration would set & clear
codecs from the media.codecs and media.prefs list, but if
all was specified the prefs list was not updated. Then a
call would fail when create_outgoing_sdp_stream() created
an SDP with no audio codecs.
A new function ast_codec_pref_append_all() is provided to
add all codecs to the prefs list - only those not already
on the list. This enables the configuration to specify a
codec preference, but still add all codecs, and even then
remove some codecs, as shown in this example:
allow = ulaw, alaw, all, !g729, !g723
Also, the display order of allow in cli output is updated
to match the configuration by using prefs instead of caps
when generating a human readable string.
Finally, a change to create_outgoing_sdp_stream() skips a
codec when it does not have a payload code instead of the
call failing.
(closes issue ASTERISK-23018)
Reported by: xrobau
Review: https://reviewboard.asterisk.org/r/3131/
........
Merged revisions 405875 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@405876 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Eliminated shadowing of the __ast_sorcery_apply_config() name parameter
causing confusion.
* Fix potential crash from sorcery.conf user input in
__ast_sorcery_apply_config() if the user supplied a malformed config line
that is missing the sorcery object type name.
* Remove redundant test in __ast_sorcery_apply_config(). !config and
config == CONFIGS_STATUS_FILEMISSING are identical.
........
Merged revisions 403541 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
