Consumers like media_cache have been running into issues with
the previous astdb "/family/key" limit of 253 bytes when needing
to store things like long URIs. An Amazon S3 URI is a good example
of this. Now, instead of using a static 256 byte buffer for
"/family/key", we use ast_asprintf() to dynamically create it.
Both test_db.c and test_media_cache.c were also updated to use
keys/URIs over the old 253 character limit.
Resolves: #881
UserNote: The `ast_db_*()` APIs have had the 253 byte limit on
"/family/key" removed and will now accept families and keys with a
total length of up to SQLITE_MAX_LENGTH (currently 1e9!). This
affects the `DB*` dialplan applications, dialplan functions,
manager actions and `databse` CLI commands. Since the
media_cache also uses the `ast_db_*()` APIs, you can now store
resources with URIs longer than 253 bytes.
(cherry picked from commit cc06c95ed2)
attest_level, send_mky and check_tn_cert_public_url weren't
propagating correctly from the attestation object to the profile
and tn.
* In the case of attest_level, the enum needed to be changed
so the "0" value (the default) was "NOT_SET" instead of "A". This
now allows the merging of the attestation object, profile and tn
to detect when a value isn't set and use the higher level value.
* For send_mky and check_tn_cert_public_url, the tn default was
forced to "NO" which always overrode the profile and attestation
objects. Their defaults are now "NOT_SET" so the propagation
happens correctly.
* Just to remove some redundant code in tn_config.c, a bunch of calls to
generate_sorcery_enum_from_str() and generate_sorcery_enum_to_str() were
replaced with a single call to generate_acfg_common_sorcery_handlers().
Resolves: #904
verification.c had an include for jansson.h left over from previous
versions of the module. Since res_stir_shaken no longer has a
dependency on jansson, the bundled version wasn't added to GCC's
include path so if you didn't also have a jansson development package
installed, the compile would fail. Removing the stale include
was the only thing needed.
Resolves: #889
* If the call to ast_config_load() returns CONFIG_STATUS_FILEINVALID,
check_for_old_config() now returns LOAD_DECLINE instead of continuing
on with a bad pointer.
* If CONFIG_STATUS_FILEMISSING is returned, check_for_old_config()
assumes the config is being loaded from realtime and now returns
LOAD_SUCCESS. If it's actually not being loaded from realtime,
sorcery will catch that later on.
* Also refactored the error handling in load_module() a bit.
Resolves: #884
For both attestation and verification, we now check whether they've
been disabled either globally or by the profile before validating
things like callerid, orig_tn, dest_tn, etc. This prevents useless
error messages.
Resolves: #879
(cherry picked from commit 7773327546)
ChanSpy(${channel}, qEoSw): because flags set o, ast_audiohook_set_frame_feed_direction(audiohook, AST_AUDIOHOOK_DIRECTION_READ); this will effect whisper audiohook and spy audiohook, this makes writing frame to whisper audiohook impossible. So add function start_whispering to starting whisper audiohook.
Resolves: #876
(cherry picked from commit a721f99eb0)
It's possible that ast_autoservice_stop is called within the autoservice thread.
In this case the autoservice thread is stuck in an endless sleep.
To avoid endless sleep ast_autoservice_stop must check that it's not called
within the autoservice thread.
Fixes: #763
(cherry picked from commit b9b0cffc29)
When Asterisk sends an offer to Bob that includes 48K and 8K codecs with
matching 4733 offers, Bob may want to use the 48K audio codec but can not
accept 48K digits and so negotiates for a mixed set.
Asterisk will now check Bob's offer to make sure Bob has indicated this is
acceptible and if not, will use Bob's preference.
Fixes: #847
(cherry picked from commit ac673dd14e)
ChanSpy(${channel}, qEoS): When chanspy spy the direction read, reading frame is often failed when reading direction read audiohook. because chanspy only read audiohook direction read; write_factory_ms will greater than 100ms soon, then ast_slinfactory_flush will being called, then direction read will fail.
Resolves: #861
(cherry picked from commit e98127d540)
* A static array of security mechanism type names was created.
* ast_sip_str_to_security_mechanism_type() was refactored to do
a lookup in the new array instead of using fixed "if/else if"
statments.
* security_mechanism_to_str() and ast_sip_security_mechanisms_to_str()
were refactored to use ast_str instead of a fixed length buffer
to store the result.
* ast_sip_security_mechanism_type_to_str was removed in favor of
just referencing the new type name array. Despite starting with
"ast_sip_", it was a static function so removing it doesn't affect
ABI.
* Speaking of "ast_sip_", several other static functions that
started with "ast_sip_" were renamed to avoid confusion about
their public availability.
* A few VECTOR free loops were replaced with AST_VECTOR_RESET().
* Fixed a meomry leak in pjsip_configuration.c endpoint_destructor
caused by not calling ast_sip_security_mechanisms_vector_destroy().
* Fixed a memory leak in res_pjsip_outbound_registration.c
add_security_headers() caused by not specifying OBJ_NODATA in
an ao2_callback.
* Fixed a few ao2_callback return code misuses.
Resolves: #845
(cherry picked from commit ca60f7db8f)
PR #700 added a preferred_format for the struct ast_rtp_codecs,
but when set the preferred_format it leaks an astobj2 ast_format.
In the next code
ast_rtp_codecs_set_preferred_format(&codecs, ast_format_cap_get_format(joint, 0));
both functions ast_rtp_codecs_set_preferred_format
and ast_format_cap_get_format increases the ao2 reference count.
Fixes: #856
(cherry picked from commit 95fadcf6db)
On modern Bluetooth devices or lower-powered asterisk servers, decreasing the channel frame size significantly improves latency and delay on outbound calls with only a mild sacrifice to the quality of the call (the frame size before was massive overkill to begin with)
(cherry picked from commit 4f5bb1e650)
Add dialplan application PJSIPNOTIFY to send either pre-configured
NOTIFY messages from pjsip_notify.conf or with headers defined in
dialplan.
Also adds the ability to send pre-configured NOTIFY commands to a
channel via the CLI.
Resolves: #799
UserNote: A new dialplan application PJSIPNotify is now available
which can send SIP NOTIFY requests from the dialplan.
The pjsip send notify CLI command has also been enhanced to allow
sending NOTIFY messages to a specific channel. Syntax:
pjsip send notify <option> channel <channel>
(cherry picked from commit e7ca7aa881)
If you run an AMI CoreShowChannelMap on a channel that isn't in a
bridge and you're in DEVMODE, you can get a FRACK because the
bridge id is empty. We now simply return an empty list for that
request.
(cherry picked from commit 63004f2c02)
This patch introduces a new identifier for channels: tenantid. It's
a stringfield on the channel that can be used for general purposes. It
will be inherited by other channels the same way that linkedid is.
You can set tenantid in a few ways. The first is to set it in the
dialplan with the Set and CHANNEL functions:
exten => example,1,Set(CHANNEL(tenantid)=My tenant ID)
It can also be accessed via CHANNEL:
exten => example,2,NoOp(CHANNEL(tenantid))
Another method is to use the new tenantid option for pjsip endpoints in
pjsip.conf:
[my_endpoint]
type=endpoint
tenantid=My tenant ID
This is considered the best approach since you will be able to see the
tenant ID as early as the Newchannel event.
It can also be set using set_var in pjsip.conf on the endpoint like
setting other channel variable:
set_var=CHANNEL(tenantid)=My tenant ID
Note that set_var will not show tenant ID on the Newchannel event,
however.
Tenant ID has also been added to CDR. It's read-only and can be accessed
via CDR(tenantid). You can also get the tenant ID of the last channel
communicated with via CDR(peertenantid).
Tenant ID will also show up in CEL records if it has been set, and the
version number has been bumped accordingly.
Fixes: #740
UserNote: tenantid has been added to channels. It can be read in
dialplan via CHANNEL(tenantid), and it can be set using
Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to
use the new tenantid option for pjsip endpoints (e.g., tenantid=My
tenant ID) so that it will show up in Newchannel events. You can set it
like any other channel variable using set_var in pjsip.conf as well, but
note that this will NOT show up in Newchannel events. Tenant ID is also
available in CDR and can be accessed with CDR(tenantid). The peer tenant
ID can also be accessed with CDR(peertenantid). CEL includes tenant ID
as well if it has been set.
UpgradeNote: A new versioned struct (ast_channel_initializers) has been
added that gets passed to __ast_channel_alloc_ap. The new function
ast_channel_alloc_with_initializers should be used when creating
channels that require the use of this struct. Currently the only value
in the struct is for tenantid, but now more fields can be added to the
struct as necessary rather than the __ast_channel_alloc_ap function. A
new option (tenantid) has been added to endpoints in pjsip.conf as well.
CEL has had its version bumped to include tenant ID.
(cherry picked from commit 3841fa814e)
source is a bash concept, so when /bin/sh points to another shell the
existing construct won't work.
Reference: https://bugs.gentoo.org/927055
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
(cherry picked from commit b45c04a7c4)
Previously, on command execution, the control thread was awoken by
sending a SIGURG. It was found that this still resulted in some
instances where the thread was not immediately awoken.
This change instead sends a null frame to awaken the control thread,
which awakens the thread more consistently.
Resolves: #801
(cherry picked from commit bdee743cd4)
When the endpoint dtmf_mode is set to auto, a SIP request is sent to the UAC, and the SIP SDP from the UAC does not include the telephone-event. Later, the UAC sends an INVITE, and the SIP SDP includes the telephone-event. In this case, DTMF should be sent by RFC2833 rather than using inband signaling.
Resolves: asterisk#826
(cherry picked from commit 6cf6856080)
* Fixed a bug in crypto_show_cli_store that was causing asterisk
to crash if there were certificate revocation lists in the
verification certificate store. We're also now prefixing
certificates with "Cert:" and CRLs with "CRL:" to distinguish them
in the list.
* Added 'untrusted_cert_file' and 'untrusted_cert_path' options
to both verification and profile objects. If you have CRLs that
are signed by a different CA than the incoming X5U certificate
(indirect CRL), you'll need to provide the certificate of the
CRL signer here. Thse will show up as 'Untrusted" when showing
the verification or profile objects.
* Fixed loading of crl_path. The OpenSSL API we were using to
load CRLs won't actually load them from a directory, only a file.
We now scan the directory ourselves and load the files one-by-one.
* Fixed the verification flags being set on the certificate store.
- Removed the CRL_CHECK_ALL flag as this was causing all certificates
to be checked for CRL extensions and failing to verify the cert if
there was none. This basically caused all certs to fail when a CRL
was provided via crl_file or crl_path.
- Added the EXTENDED_CRL_SUPPORT flag as it is required to handle
indirect CRLs.
* Added a new CLI command...
`stir_shaken verify certificate_file <certificate_file> [ <profile> ]`
which will assist troubleshooting certificate problems by allowing
the user to manually verify a certificate file against either the
global verification certificate store or the store for a specific
profile.
* Updated the XML documentation and the sample config file.
Resolves: #809
(cherry picked from commit 2fb3215f03)
The way we have been initializing the config wizard prevented it
from registering its objects if res_pjsip happened to load
before it.
* We now use the object_type_registered sorcery observer to kick
things off instead of the wizard_mapped observer.
* The load_module function now checks if res_pjsip has been loaded
already and if it was it fires the proper observers so the objects
load correctly.
Resolves: #816
UserNote: The res_pjsip_config_wizard.so module can now be reloaded.
(cherry picked from commit d11dc5247b)
softmix_bridge_write_control() now calls ast_bridge_queue_everyone_else()
with the bridge_channel so the VIDUPDATE control frame isn't echoed back.
softmix_bridge_write_control() was setting bridge_channel to NULL
when calling ast_bridge_queue_everyone_else() for VIDUPDATE control
frames. This was causing the frame to be echoed back to the
channel it came from. In certain cases, like when two channels or
bridges are being recorded, this can cause a ping-pong effect that
floods the system with VIDUPDATE control frames.
Resolves: #780
(cherry picked from commit 1272c28a0d)
The ub_result pointer passed to unbound_resolver_callback by
libunbound can be NULL if the query was for something malformed
like `.1` or `[.1]`. If it is, we now set a 'ns_r_formerr' result
and return instead of crashing with a SEGV. This causes pjproject
to simply cancel the transaction with a "No answer record in the DNS
response" error. The existing "off nominal" unit test was also
updated to check this condition.
Although not necessary for this fix, we also made
ast_dns_resolver_completed() tolerant of a NULL result.
Resolves: GHSA-v428-g3cw-7hv9
Added Reload and DBdeltree to the list of dialplan application that
can't be executed via the Originate manager action without also
having write SYSTEM permissions.
Added CURL, DB*, FILE, ODBC and REALTIME* to the list of dialplan
functions that can't be executed via the Originate manager action
without also having write SYSTEM permissions.
If the Queue application is attempted to be run by the Originate
manager action and an AGI parameter is specified in the app data,
it'll be rejected unless the manager user has either the AGI or
SYSTEM permissions.
Resolves: #GHSA-c4cg-9275-6w44
There can be empty slots in payload_mapping_tx corresponding to
dynamic payload types that haven't been seen before so we now
check for NULL before attempting to use 'type' in the call to
ast_format_cmp.
Note: Currently only chan_sip calls ast_rtp_codecs_payloads_unset()
Resolves: #822
When using the PJSIP_DIAL_CONTACTS() function for use in the Dial()
command, the contacts are returned in text form, so the input to
the path_outgoing_request() function is a contact value of NULL.
The issue was reported in ASTERISK-28211, but was not actually fixed
in ASTERISK-30100. This fix brings back the code that was previously
removed and adds code to search for a contact to extract the path
value from it.
(cherry picked from commit aeefedb086)
After change made in 624f509 to add support for non 8K RFC 4733/2833 digits,
Asterisk would only accept RFC 4733/2833 offers that matched the sample rate of
the negotiated codec(s).
This change allows Asterisk to accept 8K RFC 4733/2833 offers if the UAC
offfers 8K RFC 4733/2833 but negotiates for a non 8K bitrate codec.
A number of corresponding tests in tests/channels/pjsip/dtmf_sdp also needed to
be re-written to allow for these scenarios.
Fixes: #776
(cherry picked from commit 7d53986262)
Remove duplicate creation of ast_bool_values from
2b7c507d7d12_add_queue_log_option_log_restricted_.py. This was
causing alembic upgrades to fail since the enum was already created
in fe6592859b85_fix_mwi_subscribe_replaces_.py back in 2018.
Resolves: #797
(cherry picked from commit af58084855)
The `Require: mediasec` and `Proxy-Require: mediasec` headers need
to be sent whenever we send `Security-Client` or `Security-Verify`
headers but the logic to do that was only in add_security_headers()
in res_pjsip_outbound_register. So while we were sending them on
REGISTER requests, we weren't sending them on INVITE requests.
This commit moves the logic to send the two headers out of
res_pjsip_outbound_register:add_security_headers() and into
security_agreement:ast_sip_add_security_headers(). This way
they're always sent when we send `Security-Client` or
`Security-Verify`.
Resolves: #789
(cherry picked from commit 210fe614b2)
Whenver a new channel snapshot is created or when a channel is
destroyed, we need to delete any existing channel snapshot from
the snapshot cache. Historically, we used the channel->snapshot
pointer to delete any existing snapshots but this has two issues.
First, if something (possibly ast_channel_internal_swap_snapshots)
sets channel->snapshot to NULL while there's still a snapshot in
the cache, we wouldn't be able to delete it and it would be orphaned
when the channel is destroyed. Since we use the cache to list
channels from the CLI, AMI and ARI, it would appear as though the
channel was still there when it wasn't.
Second, since there are actually two caches, one indexed by the
channel's uniqueid, and another indexed by the channel's name,
deleting from the caches by pointer requires a sequential search of
all of the hash table buckets in BOTH caches to find the matching
snapshots. Not very efficient.
So, we now delete from the caches using the channel's uniqueid
and name. This solves both issues.
This doesn't address how channel->snapshot might have been set
to NULL in the first place because although we have concrete
evidence that it's happening, we haven't been able to reproduce it.
Resolves: #783
(cherry picked from commit 27f7cb6ea0)
