A new user option, answer_channel, adds the capability to
prevent answering the channel if it hasn't already been
answered yet.
ASTERISK-29440
Change-Id: I26642729d0345f178c7b8045506605c8402de54b
* Implemented the new "to" parameter of the MessageSend()
dialplan application. This allows a user to specify
a complete SIP "To" header separate from the Request URI.
* Completely refactored the get_outbound_endpoint() function
to actually handle all the destination combinations that
we advertized as supporting.
* We now also accept a destination in the same format
as Dial()... PJSIP/number@endpoint
* Added lots of debugging.
ASTERISK-29404
Reported by Brian J. Murrell
Change-Id: I67a485196d9199916468f7f98bfb9a0b993a4cce
Introduces three new dialplan functions, MIN and MAX,
which can be used to calculate the minimum or
maximum of up to two numbers, and ABS, an absolute
value function.
ASTERISK-29431
Change-Id: I2bda9269d18f9d54833c85e48e41fce0e0ce4d8d
STIR/SHAKEN requires a Date header alongside the Identity header, so
that has been added. Still on the outgoing side, we were missing the
dest->tn section of the JSON payload, so that has been added as well.
Moving to the incoming side, URL checking has been added to the public
cert URL to ensure that it starts with http.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Idee5b1b5e45bc3b483b3070e46ce322dca5b3f1c
For connection oriented transports PJSIP uses factories to
produce transports. When doing a partial transport reload
we need to also move the factory of the transport over so
that anything referencing the transport (such as an endpoint)
has the factory available.
ASTERISK-29441
Change-Id: Ieae0fb98eab2d9257cad996a1136e5a62d307161
Up until now, the VOLUME function has been write
only, so that TX/RX values can be set but not
read afterwards. Now, previously set TX/RX values
can be read later.
ASTERISK-29439
Change-Id: Ia23e92fa2e755c36e9c8e69f2940d2703ccccb5f
RTCP ICE candidates use a base address derived from the RTP
candidate. The port on the base address was not being updated to
the RTCP port.
This change sets the base port to the RTCP port and all is well.
ASTERISK-29433
Change-Id: Ide2d2115b307bfd3c2dfbc4d187515d724519040
When unsubscribing from an endpoint technology a FRACK
would occur due to incorrect reference counting. This fixes
that issue, along with some other issues.
Fixed a typo in get_subscription when calling ao2_find as it
needed to pass the endpoint ID and not the entire object.
Fixed scenario where a subscription would get returned when
it shouldn't have been when searching based on endpoint
technology.
A doulbe unreference has also been resolved by only explicitly
releasing the reference held by tech_subscriptions.
ASTERISK-28237 #close
Reported by: Lucas Tardioli Silveira
Change-Id: Ia91b15f8e5ea68f850c66889a6325d9575901729
In multidomain environments, it is desirable to create
PJSIP endpoints with the domain info in the endpoint name
in pjsip_endpoint.conf. This resulted in an error with
registrations, NOTIFY, and OPTIONS packet generation.
This commit will detect if there is an @ in the endpoint
identifier and generate the URI accordingly so NOTIFY and
OPTIONS From headers will generate correctly.
ASTERISK-28393
Change-Id: I96f8d01dfdd5573ba7a28299e46271dd4210b619
By default Asterisk reports the PJSIP version in a SOFTWARE attribute
of every STUN packet it sends. This may not be desired in a production
environment, and RFC5389 recommends making the use of the SOFTWARE
attribute a configurable option:
https://datatracker.ietf.org/doc/html/rfc5389#section-16.1.2
This patch adds a `stun_software_attribute` yes/no option to make it
possible to omit the SOFTWARE attribute from STUN packets.
ASTERISK-29434
Change-Id: Id3f2b1dd9584536ebb3a1d7e8395fd8b3e46860b
RFC7616 and RFC8760 allow more than one WWW-Authenticate or
Proxy-Authenticate header per realm, each with different digest
algorithms (including new ones like SHA-256 and SHA-512-256).
Thankfully however a UAS can NOT send back multiple Authenticate
headers for the same realm with the same digest algorithm. The
UAS is also supposed to send the headers in order of preference
with the first one being the most preferred. We're supposed to
send an Authorization header for the first one we encounter for a
realm that we can support.
The UAS can also send multiple realms, especially when it's a
proxy that has forked the request in which case the proxy will
aggregate all of the Authenticate headers and then send them all
back to the UAC.
It doesn't stop there though... Each realm can require a
different username from the others. There's also nothing
preventing each digest algorithm from having a unique password
although I'm not sure if that adds any benefit.
So now... For each Authenticate header we encounter, we have to
determine if we support the digest algorithm and, if not, just
skip the header. We then have to find an auth object that
matches the realm AND the digest algorithm or find a wildcard
object that matches the digest algorithm. If we find one, we add
it to the results vector and read the next Authenticate header.
If the next header is for the same realm AND we already added an
auth object for that realm, we skip the header. Otherwise we
repeat the process for the next header.
In the end, we'll have accumulated a list of credentials we can
pass to pjproject that it can use to add Authentication headers
to a request.
NOTE: Neither we nor pjproject can currently handle digest
algorithms other than MD5. We don't even have a place for it in
the ast_sip_auth object. For this reason, we just skip processing
any Authenticate header that's not MD5. When we support the
others, we'll move the check into the loop that searches the
objects.
Changes:
* Added a new API ast_sip_retrieve_auths_vector() that takes in
a vector of auth ids (usually supplied on a call to
ast_sip_create_request_with_auth()) and populates another
vector with the actual objects.
* Refactored res_pjsip_outbound_authenticator_digest to handle
multiple Authenticate headers and set the stage for handling
additional digest algorithms.
* Added a pjproject patch that allows them to ignore digest
algorithms they don't support. This patch has already been
merged upstream.
* Updated documentation for auth objects in the XML and
in pjsip.conf.sample.
* Although res_pjsip_authenticator_digest isn't affected
by this change, some debugging and a testsuite AMI event
was added to facilitate testing.
Discovered during OpenSIPit 2021.
ASTERISK-29397
Change-Id: I3aef5ce4fe1d27e48d61268520f284d15d650281
RFC 4235 Section 4.1.6 describes XML elements that should be
sent to subscribed endpoints to identify the local and remote
participants in the dialog.
This patch adds this functionality to PJSIP by iterating through the
ringing channels causing the NOTIFY, and inserts the channel info
into the dialog so that information is properly passed to the endpoint
in dialog-info+xml.
ASTERISK-24601
Patch submitted: Joshua Elson
Modified by: Joseph Nadiv and Sean Bright
Tested by: Joseph Nadiv
Change-Id: I20c5cf5b45f34d7179df6573c5abf863eb72964b
Hitherto, VoiceMail() played a non-customizable beep tone to indicate
the caller could leave a message. In some cases, the beep may not
be desired, or a different tone may be desired.
To increase flexibility, a new option allows customization of the tone.
If the t option is specified, the default beep will be overridden.
Supplying an argument will cause it to use the specified file for the tone,
and omitting it will cause it to skip the beep altogether. If the option
is not used, the default behavior persists.
ASTERISK-29349
Change-Id: I1c439c0011497e28a28067fc1cf1e654c8843280
Although Asterisk can receive and propogate flash events, it currently
provides no mechanism for doing anything with them itself.
This AMI event allows flash events to be processed by Asterisk.
Additionally, AST_CONTROL_FLASH is included in a switch statement
in channel.c to avoid throwing a warning when we shouldn't.
ASTERISK-29380
Change-Id: Ie17ffe65086e0282c88542e38eed6a461ec79e81
AST_CONTROL_FLASH isn't accounted for in a switch statement in file.c
where it should be ignored. Adding this to the switch ensures a
warning isn't thrown on RFC2833 flash events, since nothing's amiss.
ASTERISK-29372
Change-Id: I4fa549bfb7ba1894a4044de999ea124877422fbc
In some cases it was possible for a STUN packet to be destroyed
prematurely or even destroyed partially multiple times.
This patch provided by Teluu fixes the lifetime of these
packets and ensures they aren't partially destroyed multiple
times.
https://github.com/pjsip/pjproject/pull/2709
ASTERISK-29377
Change-Id: Ie842ad24ddf345e01c69a4d333023f05f787abca
Some ATAs send hook flash events as application/hook-flash, rather than a DTMF
event. Now, we also recognize hook-flash as a flash event.
ASTERISK-29370
Change-Id: I1c3b82a040dff3affcd94bad8ce33edc90c04725
STIR/SHAKEN encodes using base64 URL format. Currently, we just use
base64. New functions have been added that convert to and from base64
encoding.
The origid field should also be an UUID. This means there's no reason to
have it as an option in stir_shaken.conf, as we can simply generate one
when creating the Identity header.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Icf094a2a54e87db91d6b12244c9f5ba4fc2e0b8c
We're getting the serial number of the certificate from openssl and
freeing it with ast_free(), but it needs to be freed with OPENSSL_free()
instead. Now we duplicate the string and free the one from openssl with
OPENSSL_free(), which means we can still use ast_free() on the returned
string.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Ia6e1a4028c1933a0e1d204b769ebb9f5a11f00ab
During OpenSIPit, we found out that the public certificates must be of
type X.509. When reading in public keys, we use the corresponding X.509
functions now.
We also discovered that we needed a better naming scheme for the
certificates since certificates with the same name would cause issues
(overwriting certs, etc.). Now when we download a public certificate, we
get the serial number from it and use that as the name of the cached
certificate.
The configuration option public_key_url in stir_shaken.conf has also
been renamed to public_cert_url, which better describes what the option
is for.
https://wiki.asterisk.org/wiki/display/AST/OpenSIPit+2021
Change-Id: Ia00b20835f5f976e3603797f2f2fb19672d8114d
Enhancements:
* The MessageSend dialplan application now takes an optional
third argument that can set the message's "To" field on
outgoing messages. It's an alternative to using the
MESSAGE(to) dialplan function.
NOTE: No channel driver currently implements this field. A
follow-on commit for res_pjsip_messaging will implement it for
the chan_pjsip channel driver.
* To prevent confusion with the first argument, currently named
"to", it's been renamed to "destination". Its function,
creating the request URI, hasn't changed.
* The documentation for MessageSend was updated to be
more clear about the parameters and how they interact
the MESSAGE() dialplan function.
* With the rename of MessageSend's first parameter, and the fact
that message.c references <info> elements in chan_sip.c,
res_pjsip_messaging.c and res_xmpp, they each needed
documentation updates to use MessageDestinationInfo instead of
MessageToInfo.
* appdocsxml.dtd was updated to include a missing element
declaration for "dataType". This was showing up as an error
in Eclipse's dtd editor.
* Despite the changes in this commit, there should be
no impact to current users of MessageSend.
Change-Id: I6fb5b569657a02866a66ea352fd53d30d8ac965a
We assume that a timestamp value of 0 represents an 'uninitialized'
timestamp, but 0 is a valid value. Add a simple wrapper to be able to
differentiate between whether the value is set or not.
This also removes the fix for ASTERISK~28812 which should not be
needed if we are checking the last timestamp appropriately.
ASTERISK-29030 #close
Change-Id: Ie70d657d580d9a1f2877e25a6ef161c5ad761cf7
When a stream topology is provided to chan_local when dialing
it filters the audio formats down. This operation did not skip
streams which were removed (that have no formats) resulting in
calling being aborted.
This change causes such streams to be skipped.
ASTERISK-29407
Change-Id: I1de8b98727cb2d10f4bc287da0b5fdcb381addd6
Up/down sampling changes the number of samples produced by a translation.
This must be taken into account when checking the codec's buffer size.
ASTERISK-29328
Change-Id: I9aebe2f8788e00321a7f5c47aa97c617f39e9055
There is a possibility, when bridge_channel_write_frame() is
called, that the bridge_channel->chan will be NULL. The first
thing bridge_channel_write_frame() does though is call
ast_channel_is_multistream() which had no check for a NULL
channel and therefore caused a segfault. Since it's still
possible for bridge_channel_write_frame() to write the frame to
the other channels in the bridge, we don't want to bail before we
call ast_channel_is_multistream() but we can just skip the
multi-channel stuff. So...
bridge_channel_write_frame() only calls ast_channel_is_multistream()
if bridge_channel->chan is not NULL.
As a safety measure, ast_channel_is_multistream() now returns
false if the supplied channel is NULL.
ASTERISK-29379
Reported-by: Vyrva Igor
Reported-by: Ross Beer
Change-Id: Idfe62dbea8c69813ecfd58e113a6620dc42352ce
Using the information from the MODULEINFO XML we can
now output useful information at the end of module
loading for deprecated modules. This includes the
version it was deprecated in, the version it will be
removed in, and the replacement if available.
ASTERISK-29339
Change-Id: I2080dab97d2186be94c421b41dabf6d79a11611a
For some input to the standard deviation algorithm extremely large,
and wrong numbers were being calculated.
This patch uses a new formula for correctly calculating both the
running mean and standard deviation for the given inputs.
ASTERISK-29364 #close
Change-Id: Ibc6e18be41c28bed3fde06d612607acc3fbd621f
The calculated minimum lost packets represents the lowest number of
lost packets missed during an RTCP report interval. Zero of course
is the lowest, but the idea is that this value contain the lowest
number of lost packets once some have been missed.
This patch checks to make sure the number of lost packets over an
interval is not zero before checking and setting the minimum value.
Also, this patch updates the rtp lost packet test to check for
packet loss over several reports vs one.
Change-Id: I07d6e21cec61e289c2326138d6bcbcb3c3d5e008
Flash in RTP is conveyed the same as DTMF, just with a
specific digit. In Asterisk however we do flash as a
single control frame.
This change makes it so that only on end do we provide
the flash control frame to the core. Previously we would
provide a flash control frame on both begin and end,
causing flash to work improperly.
ASTERISK-29373
Change-Id: I1accd9c6e859811336e670e698bd8bd124f33226
This patch makes it so when Asterisk is compiled in DEVMODE a CLI
command is available that allows someone to drop incoming RTP
packets. The command allows for dropping of packets once, or on a
timed interval (e.g. drop 10 packets every 5 seconds). A user can
also specify to drop packets by IP address.
Change-Id: I25fa7ae9bad6ed68e273bbcccf0ee51cae6e7024
Added a TIME_UNIT enumeration, and a function that converts a
string to one of the enumerated values. Also, added functions
that create and initialize a timeval object using a specified
value, and unit type.
Change-Id: Ic31a1c3262a44f77a5ef78bfc85dcf69a8d47392
Also removed the sample documentation, and some oddly-placed
documentation about the timeout argument to the Queue() application
itself. There is a large section on the timeout behavior below.
ASTERISK-26614 #close
Change-Id: I8f84e8304b50305b7c4cba2d9787a5d77c3a6217
The 'core' console (ie: asterisk -c) does read logger.conf and does
use the dateformat= option.
Whereas 'remote' consoles (ie: asterisk -r -T) does not read logger.conf
and uses a hard coded dateformat option for printing received verbose messages:
main/logger.c: static char dateformat[256] = "%b %e %T"
This change will load logger.conf for each remote console session and
use the dateformat= option to set the per-line timestamp for verbose messages
Change-Id: I3ea10990dbd920e9f7ce8ff771bc65aa7f4ea8c1
ASTERISK-25358: #close
Reported-by: Igor Liferenko
When the check for equal topologies was added to reschedule_reinvite()
it was assumed that both the pending and active media states would
actually have non-NULL topologies. We since discovered this isn't
the case.
We now only test for equal topologies if both media states have
non-NULL topologies. The logic had to be rearranged a bit to make
sure that we cloned the media states if their topologies were
non-NULL but weren't equal.
ASTERISK-29215
Change-Id: I61313cca7fc571144338aac826091791b87b6e17
If a queue member was updated with the same status multiple
times each time a QueueMemberStatus event would be sent
which would be a duplicate of the previous.
This change makes it so that the QueueMemberStatus event is
only sent if the status actually changes.
ASTERISK-29355
Change-Id: I580c60d992a0a8f2bea8b91c868771b3b490d116
When using the ast_unreal_lock_all function no channel
locks can be held before calling it.
This change unlocks the channel that indicate was
called on before doing so and then relocks it afterwards.
ASTERISK-29035
Change-Id: Id65016201b5f9c9519a216e250f9101c629e19e9
