https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r323669 | rmudgett | 2011-06-15 11:43:18 -0500 (Wed, 15 Jun 2011) | 21 lines
[regression] Voicemail MWI is no longer sent.
When leaving a voicemail, the MWI message is never sent. The same thing
happens when checking a voicemail and marking it as read.
If you restart Asterisk, everything comes up at that state correctly, but
changes to the messages in voicemail causes the light to not be set
appropriately. Very easy to reproduce.
* Made ast_event_check_subscriber() return TRUE if there are ANY
subscribers to an event type when there are no restricting ie values
passed. This allows an event being queued to be queued.
(closes issue ASTERISK-18002)
Reported by: lmadsen
Tested by: lmadsen, irroot
Patches:
jira_asterisk_18002_v1.8.patch uploaded by rmudgett (License #5621)
(closes issue ASTERISK-18019)
........
r323670 | rmudgett | 2011-06-15 11:43:31 -0500 (Wed, 15 Jun 2011) | 7 lines
Add a test to the event unit tests to catch ASTERISK-18002.
The new tests check to see if there are ANY subscribers to the event type
when ast_event_check_subscriber() is not passed any specific ie values.
(issue ASTERISK-18002)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323671 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
................
r323608 | seanbright | 2011-06-15 11:31:53 -0400 (Wed, 15 Jun 2011) | 39 lines
Merged revisions 323579 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.6.2
................
r323579 | seanbright | 2011-06-15 11:22:50 -0400 (Wed, 15 Jun 2011) | 32 lines
Merged revisions 323559 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r323559 | seanbright | 2011-06-15 11:15:30 -0400 (Wed, 15 Jun 2011) | 25 lines
Resolve a segfault/bus error when we try to map memory that falls on a page
boundary.
The fix for ASTERISK-15359 was incorrect in that it added 1 to the length of the
mmap'd region. The problem with this is that reading/writing to that extra byte
outside of the bounds of the underlying fd causes a bus error.
The real issue is that we are working with both a FILE * and the raw fd
underneath it and not synchronizing between them. The code that was removed in
ASTERISK-15359 was correct, but we weren't flushing the FILE * before mapping
the fd.
Looking at the manager code in 1.4 reveals that the FILE * in 'struct
mansession' is never used except to create a temporary file that we immediately
fdopen. This means we just need to write a 0 byte to the fd and everything will
just work. The other branches require a call to fflush() which, while not a
guaranteed fix, should reduce the likelihood of a crash.
This all makes sense in my head.
(closes issue ASTERISK-16460)
Reported by: Ravelomanantsoa Hoby (hoby)
Patches:
issue17747_1.4_svn_markII.patch uploaded by Sean Bright (license #5060)
........
................
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323609 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r323371 | jrose | 2011-06-14 11:38:43 -0500 (Tue, 14 Jun 2011) | 12 lines
Changes contact use in build_peer to use the FORCE_RPORT flag instead of RPORT_PRESENT
It turned out that this was causing NAT=Yes to always use rport when present which was
against 1.6.2 behavior and the check itself was redundant since the only way this
segment of code could be reached was if RPORT_PRESENT was already evaluated as true
earlier.
(closes issue ASTERISK-17789)
Reported by: byronclark
Patches:
use_sip_nat_force_rport.patch uploaded by byronclark (license 1200)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323372 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Current behavior in ConfBridge menu definitions is that first definition takes
precedence, even in templated situations. This change allows inheritance and
overriding to work as expected so that the last definition takes precedence.
(closes ASTERISK-17986)
Review: https://reviewboard.asterisk.org/r/1267/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323272 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds the playing_moh flag to the conference_bridge_user struct that
signifies when MOH should be playing so code doesn't have to guess whether
MOH is playing.
This change also adds the necessary checking to ensure that MOH continues
playing for a single user in a conference after the join sound is played when
configured to do so.
(closes ASTERISK-17988)
Review: https://reviewboard.asterisk.org/r/1263/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323107 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Bridge and user profiles are not checked for existence before use. The lack
of a fully formed bridge profile can cause a segfault when sounds are accessed.
This change ensures that bridge and user profiles exist prior to usage
attempts.
Review: https://reviewboard.asterisk.org/r/1264/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@323106 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322981 | twilson | 2011-06-10 08:29:00 -0700 (Fri, 10 Jun 2011) | 11 lines
Avoid a DB1 infinite loop bug
Explicity check the last entry in the DB and make sure that we don't iterate
past it. Since there can be no duplicates, this just makes sure that we stop
after matching the last key.
This patch also refactors the code to get away from some code duplication. A
previous patch added many astdb tests and this patch passed them.
Review: https://reviewboard.asterisk.org/r/1259/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322982 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322749 | rmudgett | 2011-06-09 11:31:53 -0500 (Thu, 09 Jun 2011) | 15 lines
Remove potential deadlock in call pickup race.
Deadlock is possible in ast_do_pickup() when holding the target channel
lock and trying to get the chan channel lock. Also, holding the target
lock when calling ast_channel_masquerade() is not a good idea because that
routine does deadlock avoidance.
* Removed the need to hold the target lock after marking the target with a
datastore and getting the connected line data off of the target channel.
* Moved can_pickup() to ast_can_pickup() in features.c. Now all the call
pickup methods use the same basic call pickup availability check.
Review: https://reviewboard.asterisk.org/r/1234/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322750 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r322585 | jrose | 2011-06-09 09:06:42 -0500 (Thu, 09 Jun 2011) | 11 lines
Adds ast_escape_encoded utility to properly handle escaping of quoted field before uri.
This commit backports a feature in trunk affecting initreqprep so that display name won't
be encoded improperly. Also includes unit tests for the ast_escape_quoted function.
This patch gives 1.8 a much improved outlook in countries which don't use standard
ASCII characters.
(closes issue ASTERISK-16949)
Reported by: Örn Arnarson
Review: https://reviewboard.asterisk.org/r/1235/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322586 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Autoanswer added to skinny based on incoming chan var SKINNY_AUTOANSWER.
Initial value must be the time to autoanswer in ms, then optionally :BEEP
to play a tone when answered and :MUTE to mute the mic when answering.
eg 3000:MUTE:BEEP will ring for 3 secs, then answer, mute the mic, and
play a beep. just 3000 would answer afer 3 secs of ringing with no
beep and full two way audio.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322544 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322484 | rmudgett | 2011-06-08 15:46:55 -0500 (Wed, 08 Jun 2011) | 15 lines
Ring all queue with more than 255 agents will cause crash.
1. Create a ring-all queue with 500 permanent agents.
2. Call it.
3. Asterisk will crash.
The watchers array in app_queue.c has a hard limit of 255. Bounds
checking is not done on this array. No sane person should put 255 people
in a ring-all queue, but we should not crash anyway.
* Added bounds checking to the watchers array.
JIRA AST-464
JIRA SWP-2903
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322485 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322425 | rmudgett | 2011-06-08 13:46:30 -0500 (Wed, 08 Jun 2011) | 16 lines
SRV lookup attempted for SIP peers listed as an IP address.
Asterisk attempts to SRV lookup a host name even if the host name is an IP
address. Regression introduced when IPv6 support was added.
* Restored the check in ast_dnsmgr_lookup() to see if the given host name
is an IP address. The IP address could be in either IPv4 or IPv6 formats.
(closes issue ASTERISK-17815)
Reported by: Byron Clark
Tested by: Byron Clark, Richard Mudgett
Patches:
issue19248_v1.8.patch - uploaded by Richard Mudgett (License #5621)
Review: https://reviewboard.asterisk.org/r/1240/
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322426 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The do_monitor seemed to be there for task scheduling and network monitoring. However, the network monitoring has a dedicated thread so the ast_io_wait was basically just a usleep as it didn't actually seem to be monitoring anything.
Review: https://reviewboard.asterisk.org/r/1256/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322381 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r322322 | irroot | 2011-06-08 08:18:38 +0200 (Wed, 08 Jun 2011) | 18 lines
Make handle_request_publish do dialog expiration and destruction.
This patch fixes handle_request_publish so that it does dialog expiration and destruction.
Without this patch the incoming PUBLISH requests will get stuck in the dialog list.
Restarting asterisk is the only way to remove them.
Personal observation on one system the server hung up while looping through the channels
rendering asterisk unusable and all sip phones unregisterd when they try reregister
more requests are added.
(closes issue #18898)
Reported by: gareth
Tested by: loloski, Chainsaw, wimpy, se, kuj, irroot
Jira: https://issues.asterisk.org/jira/browse/ASTERISK-17915
Review: https://reviewboard.asterisk.org/r/1253
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@322323 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321926 | rmudgett | 2011-06-03 17:09:36 -0500 (Fri, 03 Jun 2011) | 18 lines
Asterisk crash when unloading cdr_radius/cel_radius.
The rc_openlog() API call is passed a string that is used by openlog() to
format log messages. The openlog() does not copy the string it just keeps
a pointer to it. When the module is unloaded, the string is gone from
memory. Depending upon module load order and if the other module then has
an error, a crash happens.
* Pass rc_openlog() a strdup'd string with the understanding that there
will be a small memory leak if the cdr_radius/cel_radius modules are
unloaded.
* Call rc_destroy() to free the rc handle memory when the module is
unloaded.
JIRA AST-483
JIRA SWP-3062
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321927 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321924 | rmudgett | 2011-06-03 16:49:17 -0500 (Fri, 03 Jun 2011) | 5 lines
Be more explicit for CCSS generic device state event subscription.
Make CCSS generic device state event subscription specify the
AST_EVENT_IE_STATE ie exists to be safe.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321925 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321871 | rmudgett | 2011-06-03 15:58:13 -0500 (Fri, 03 Jun 2011) | 27 lines
Event subscription fixes.
Must commit the subscription fixes together with the integration
subscription tests. The subscription fixes cause an erroneously passing
test to fail. The new subscription tests detect errors without the
subscription fixes.
* Added missing event_names[] table entry.
* Reworked ast_event_check_subscriber()/match_sub_ie_val_to_event() to
correctly detect if a subscriber exists for the proposed event.
* Made match_ie_val() and match_sub_ie_val_to_event() check the buffer
length for RAW payload types.
* Fixed error handling memory leak in ast_event_sub_activate(),
ast_event_unsubscribe(), and ast_event_queue().
* Made ast_event_new() and ast_event_check_subscriber() better protect
themselves from an invalid payload type.
* Added container lock protection between removing old cache events and
adding the new cached event in
ast_event_queue_and_cache()/event_update_cache().
* Added new event subscription tests.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321872 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r321753 | russell | 2011-06-03 13:32:45 -0500 (Fri, 03 Jun 2011) | 2 lines
Backport an astobj2 unit test so that it runs on 1.8 as well.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321754 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Don't send all messages to 's'. Get the destination from the request URI.
(Found using automated test cases).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321617 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk now has protocol independent support for processing text messages
outside of a call. Messages are routed through the Asterisk dialplan.
SIP MESSAGE and XMPP are currently supported. There are options in sip.conf
and jabber.conf that enable these features.
There is a new application, MessageSend(). There are two new functions,
MESSAGE() and MESSAGE_DATA(). Documentation will be available on
the project wiki, wiki.asterisk.org.
Thanks to Terry Wilson for the assistance with development and to David Vossel
for helping with some additional testing.
Review: https://reviewboard.asterisk.org/r/1042/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321546 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.8
........
r321528 | may | 2011-06-01 14:40:19 +0400 (Wed, 01 Jun 2011) | 14 lines
Fix double alerting, add forced alerting before answer
Fix double alerting (it wasn't fixed here by issue #18542)
Add forced alerting before connect (if it wasn't before)
Try to send all packets from outgoing queue rather than one only
Call goes into clearing state when disconnect command is received
(closes issue #19361)
Reported by: vmikhelson
Patches:
issue19361-3.patch uploaded by may213 (license 454)
Tested by: vmikhelson
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@321529 65c4cc65-6c06-0410-ace0-fbb531ad65f3
