In the highly-unlikely event that get_authorization_hdr() couldn't find an
Authorization header in a request, trying to get the digest algorithm
would cauase a SEGV. We now check that we have an auth header that matches
the realm before trying to get the algorithm from it.
Resolves: #GHSA-64qc-9x89-rx5j
This patch resolves two issues in Sorcery objectset handling with multiple
backends:
1. Prevent duplicate objects:
When an object exists in more than one backend (e.g., a contact in both
'astdb' and 'realtime'), the objectset previously returned multiple instances
of the same logical object. This caused logic failures in components like the
PJSIP registrar, where duplicate contact entries led to overcounting and
incorrect deletions, when max_contacts=1 and remove_existing=yes.
This patch ensures only one instance of an object with a given key is added
to the objectset, avoiding these duplicate-related side effects.
2. Ensure missing objects are created:
When using multiple writable backends, a temporary backend failure can lead
to objects missing permanently from that backend.
Currently, .update() silently fails if the object is not present,
and no .create() is attempted.
This results in inconsistent state across backends (e.g. astdb vs. realtime).
This patch introduces a new global option in sorcery.conf:
[general]
update_or_create_on_update_miss = yes|no
Default: no (preserves existing behavior).
When enabled: if .update() fails with no data found, .create() is attempted
in that backend. This ensures that objects missing due to temporary backend
outages are re-synchronized once the backend is available again.
Added a new CLI command:
sorcery show settings
Displays global Sorcery settings, including the current value of
update_or_create_on_update_miss.
Updated tests to validate both flag enabled/disabled behavior.
Fixes: #1289
UserNote: Users relying on Sorcery multiple writable backends configurations
(e.g., astdb + realtime) may now enable update_or_create_on_update_miss = yes
in sorcery.conf to ensure missing objects are recreated after temporary backend
failures. Default behavior remains unchanged unless explicitly enabled.
If Caller ID is disabled for an FXS port, then we should not send any
Caller ID spill on the line, as we have no Caller ID information that
we can/should be sending.
Resolves: #1394
It is possible to modify the dialmode setting in the chan_dahdi/sig_analog
private using the CHANNEL function, to modify it during calls. However,
it was not being reset between calls, meaning that if, for example, tone
dialing was disabled, it would never work again unless explicitly enabled.
This fixes the setting by pairing it with a "perm" version of the setting,
as a few other features have, so that it can be reset to the permanent
setting between calls. The documentation is also clarified to explain
the interaction of this setting and the digitdetect setting more clearly.
Resolves: #1378
* Added a new option to the WebSocket dial string to capture the additional
URI parameters.
* Added a new API ast_uri_verify_encoded() that verifies that a string
either doesn't need URI encoding or that it has already been encoded.
* Added a new API ast_websocket_client_add_uri_params() to add the params
to the client websocket session.
* Added XML documentation that will show up with `core show application Dial`
that shows how to use it.
Resolves: #1352
UserNote: A new WebSocket channel driver option `v` has been added to the
Dial application that allows you to specify additional URI parameters on
outgoing connections. Run `core show application Dial` from the Asterisk CLI
to see how to use it.
ast_websocket_read() receives data into a fixed 64K buffer then continually
reallocates a final buffer that, after all continuation frames have been
received, is the exact length of the data received and returns that to the
caller. process_text_message() in chan_websocket was attempting to set a
NULL terminator on the received payload assuming the payload buffer it
received was the large 64K buffer. The assumption was incorrect so when it
tried to set a NULL terminator on the payload, it could, depending on the
state of the heap at the time, cause heap corruption.
process_text_message() now allocates its own payload_len + 1 sized buffer,
copies the payload received from ast_websocket_read() into it then NULL
terminates it prevent the possibility of the overrun and corruption.
Resolves: #1384
Adds an ARI command to send a progress indication to a channel.
DeveloperNote: A new ARI endpoint is available at `/channels/{channelId}/progress` to indicate progress to a channel.
The debug logging during DSP processing has always been kind
of overwhelming and annoying to troubleshoot. Simplify and
improve the logging in a few ways to aid DSP debugging:
* If we had a DSP hit, don't also emit the previous debug message that
was always logged. It is duplicated by the hit message, so this can
reduce the number of debug messages during detection by 50%.
* Include the hit count and required number of hits in the message so
on partial detections can be more easily troubleshot.
* Use debug level 9 for hits instead of 10, so we can focus on hits
without all the noise from the per-frame debug message.
* 1-index the hit count in the debug messages. On the first hit, it
currently logs '0', just as when we are not detecting anything,
which can be confusing.
Resolves: #1375
After an asterisk restart, the deletion of ARI Devicestates didn't
return error, but the devicestate was not deleted.
Found a typo on populate_cache function that created wrong cache for
device states.
This bug caused wrong assumption that devicestate didn't exist,
since it was not in cache, so deletion didn't returned error.
Fixes: #1327
Add an option for ChanSpy and ExtenSpy to not answer the channel
automatically. Most applications that auto-answer by default
already have an option to disable this behavior if unwanted.
Resolves: #1358
UserNote: ChanSpy and ExtenSpy can now be configured to not
automatically answer the channel by using the 'N' option.
If you do a `core show application Dial`, you'll see it's kind of a mess.
Indents are wrong is some places, examples are printed in black which makes
them invisible on most terminals, and the lack of line breaks in some cases
makes it hard to follow.
* Fixed the rendering of examples so they are indented properly and changed
the color so they can be seen.
* There is now a line break before each option.
* Options are now printed on their own line with all option content indented
below them.
Example from Dial before fixes:
```
Example: Dial 555-1212 on first available channel in group 1, searching
from highest to lowest
Example: Ringing FXS channel 4 with ring cadence 2
Example: Dial 555-1212 on channel 3 and require answer confirmation
...
O([mode]):
mode - With <mode> either not specified or set to '1', the originator
hanging up will cause the phone to ring back immediately.
- With <mode> set to '2', when the operator flashes the trunk, it will ring
their phone back.
Enables *operator services* mode. This option only works when bridging a DAHDI
channel to another DAHDI channel only. If specified on non-DAHDI interfaces, it
will be ignored. When the destination answers (presumably an operator services
station), the originator no longer has control of their line. They may hang up,
but the switch will not release their line until the destination party (the
operator) hangs up.
p: This option enables screening mode. This is basically Privacy mode
without memory.
```
After:
```
Example: Dial 555-1212 on first available channel in group 1, searching
from highest to lowest
same => n,Dial(DAHDI/g1/5551212)
Example: Ringing FXS channel 4 with ring cadence 2
same => n,Dial(DAHDI/4r2)
Example: Dial 555-1212 on channel 3 and require answer confirmation
same => n,Dial(DAHDI/3c/5551212)
...
O([mode]):
mode - With <mode> either not specified or set to '1', the originator
hanging up will cause the phone to ring back immediately.
With <mode> set to '2', when the operator flashes the trunk, it will
ring their phone back.
Enables *operator services* mode. This option only works when bridging
a DAHDI channel to another DAHDI channel only. If specified on
non-DAHDI interfaces, it will be ignored. When the destination answers
(presumably an operator services station), the originator no longer has
control of their line. They may hang up, but the switch will not
release their line until the destination party (the operator) hangs up.
p:
This option enables screening mode. This is basically Privacy mode
without memory.
```
There are still things we can do to make this more readable but this is a
start.
This can be reproduced under certain curcomstences.
For example: call app.playback from lua with invalid data: app.playback({}).
pbx_lua.c will try to get data for this playback using lua_tostring function.
This function returs NULL for everything but strings and numbers.
Then, it calls term_color with NULL data.
term_color function can call(if we don't use vt100 compat term)
ast_copy_string with NULL inbuf which cause segfault. bt example:
ast_copy_string (size=8192, src=0x0, dst=0x7fe44b4be8b0)
at /usr/src/asterisk/asterisk-20.11.0/include/asterisk/strings.h:412
Resolves: https://github.com/asterisk/asterisk/issues/1363
If the BRIDGE_NOANSWER variable is set on a channel, it is not supposed
to answer when another channel bridges to it using Bridge(), and this is
checked when ast_bridge_call* is called. However, another path exists
(bridge_exec -> ast_bridge_add_channel) where this variable was not
checked and channels would be answered. We now check the variable there.
Resolves: #401Resolves: #1364
It's reproducible with pbx_lua, not regular dialplan.
deadlock description:
1. asterisk locks a channel
2. calls function onedigit_goto
3. calls ast_goto_if_exists funciton
4. checks ast_exists_extension -> pbx_extension_helper
5. pbx_extension_helper calls pbx_find_extension
6. Then asterisk starts autoservice in a new thread
7. autoservice run tries to lock the channel again
Because our channel is locked already, autoservice can't lock.
Autoservice can't lock -> autoservice stop is waiting forever.
onedigit_goto waits for autoservice stop.
Resolves: https://github.com/asterisk/asterisk/issues/1335
Based on the firing order of the PJSIP call-backs on a redirect, it was possible for
the Diversion header to not be included in the outgoing 181 response to the UAC and
the INVITE to the UAS.
This change moves the Diversion header processing to an earlier PJSIP callback while also
preventing the corresponding update that can cause a duplicate 181 response when processing
the header at that time.
Resolves: #1349
With `sounds_search_custom_dir = yes`, we are supposed to search for sounds
in the `AST_DATA_DIR/sounds/custom` directory before searching the normal
directories. Unfortunately, a recent change
(https://github.com/asterisk/asterisk/pull/1172) had a typo resulting in
the "custom" directory not being searched. This change restores this
expected behavior.
Resolves: #1353
Fixes: #1280
UserNote: Enabling the tracking of the
STREAM_BEGIN and the STREAM_END event
types in cel.conf will log media files and
music on hold played to each channel.
The STREAM_BEGIN event's extra field will
contain a JSON with the file details (path,
format and language), or the class name, in
case of music on hold is played. The DTMF
event's extra field will contain a JSON with
the digit and the duration in milliseconds.
Remove VALID_EXTEN, which was deprecated/superseded by DIALPLAN_EXISTS
in Asterisk 11 (commit 8017b65bb9),
as DIALPLAN_EXISTS does the same thing and is more flexible.
Resolves: #1347
UpgradeNote: The deprecated VALID_EXTEN function has been removed.
Use DIALPLAN_EXISTS instead.
Remove the deprecated 'rotatetimestamp' config option, as this
was deprecated by 'rotatestrategy' in 1.6 by commit
f5a14167f3.
Resolves: #1345
UpgradeNote: The deprecated rotatetimestamp option has been removed.
Use rotatestrategy instead.
The "no debug channel" command has been deprecated since
1.6 (commit 691363656f),
as it is replaced by "core set debug channel", which also
supports tab-completion on channels. Remove the redundant
command.
Resolves: #1343
UpgradeNote: The deprecated "no debug channel" command has
now been removed; use "core set debug channel" instead.
QUEUE_MEMBER_COUNT has been deprecated since at least 1.6,
for fully duplicating functionality available in the
QUEUE_MEMBER function; remove it now.
Resolves: #1341
UpgradeNote: The deprecated QUEUE_MEMBER_COUNT function
has been removed; use QUEUE_MEMBER(<queue>,logged) instead.
The fact that deleting an object from a map invalidates any iterator
that happens to currently point to that object was overlooked in the initial
implementation. Unfortunately, there's no way to detect that an iterator
has been invalidated so the result was an occasional SEGV triggered by modules
like app_chanspy that opens an iterator and can keep it open for a long period
of time. The new implementation doesn't keep the underlying C++ iterator
open across calls to ast_channel_iterator_next() and uses a read lock
on the map to ensure that, even for the few microseconds we use the
iterator, another thread can't delete a channel from under it. Even with
this change, the iterators are still WAY faster than the ao2_legacy
storage driver.
Full details about the new implementation are located in the comments for
iterator_next() in channelstorage_cpp_map_name_id.cc.
Resolves: #1309
UserNote: Options are now available in the menuselect "Resource Modules"
category that allow you to enable the AES_192, AES_256 and AES_GCM
cipher suites in res_srtp. Of course, libsrtp and OpenSSL must support
them but modern versions do. Previously, the only way to enable them was
to set the CFLAGS environment variable when running ./configure.
The default setting is to disable them preserving existing behavior.
In the original implementation, both CANCEL and NO ANSWER states were
consolidated under the NO ANSWER disposition. This patch introduces a
separate CANCEL disposition, with an optional configuration switch to
enable this new disposition.
Resolves: #1323
UserNote: A new CDR option "canceldispositionenabled" has been added
that when set to true, the NO ANSWER disposition will be split into
two dispositions: CANCEL and NO ANSWER. The default value is 'no'
Currently the CURL function only supports Basic Authentication,
the default auth method in libcurl. Add an option that also
allows enabling digest authentication.
Resolves: #1332
UserNote: The httpauth field in CURLOPT now allows the authentication
methods to be set.
UpgradeNote: The safe_asterisk script now checks that, if it was run by the
root user, the /etc/asterisk/startup.d directory and all the files it contains
are owned by root. If the checks fail, safe_asterisk will exit with an error
and Asterisk will not be started. Additionally, the default logging
destination is now stderr instead of tty "9" which probably won't exist
in modern systems.
Resolves: #GHSA-v9q8-9j8m-5xwp
DeveloperNote: The 32-bit ast_options has no room left to accomodate new
options and so has been converted to an ast_flags64 structure. All internal
references to ast_options have been updated to use the 64-bit flag
manipulation macros. External module references to the 32-bit ast_options
should continue to work on little-endian systems because the
least-significant bytes of a 64 bit integer will be in the same location as a
32-bit integer. Because that's not the case on big-endian systems, we've
swapped the bytes in the flags manupulation macros on big-endian systems
so external modules should still work however you are encouraged to test.
This patch fixes an issue in the ODBC Realtime engine where Asterisk incorrectly
falls back to the next configured backend when the current one returns
SQL_NO_DATA (i.e., no record found).
This is a logical error and performance risk in multi-backend configurations.
Solution:
Introduced CONFIG_RT_NOT_FOUND ((void *)-1) as a special return marker.
ODBC Realtime backend now return CONFIG_RT_NOT_FOUND when no data is found.
Core engine stops iterating on this marker, avoiding unnecessary fallback.
Notes:
Other Realtime backends (PostgreSQL, LDAP, etc.) can be updated similarly.
This patch only covers ODBC.
Fixes: #1305
`ast_ari_channels_create` and `ast_ari_channels_dial` called the
`ast_channel_get_by_name` function with optional arguments. Since
8f1982c4d6, this function logs an error for empty channel names.
This commit adds checks for empty optional arguments that are used
to call `ast_channel_get_by_name` to prevent these error logs.
The already-deprecated "password" option for the AGENT function was
removed in commit d43b17a872 for
Asterisk 12, but the documentation for it wasn't removed then.
Resolves: #1321
Under certain circumstances the context/extens/prio are set in the ast_async_goto, for example action Redirect.
In the situation that action Redirect is broken by pbx_extension_helper this info is changed.
This will cause the current dialplan location to be executed twice.
In other words, the Redirect action does not take effect.
Resolves: #1315
Remove the deprecated maxmessage and minmessage options,
which have been superseded by maxsecs and minsecs since 1.6.
Also remove the deprecated 'cz' language option (deprecated
since 1.8.)
Resolves: #1298
UpgradeNote: The deprecated maxmessage and minmessage options
have been removed; use maxsecs and minsecs instead.
The deprecated 'cz' language has also been removed; use 'cs' instead.
Currently, the ast_tls_cert script is hardcoded to produce certificates
with a validity of 365 days, which is not generally desirable for self-
signed certificates. Make this parameter configurable.
Resolves: #1307
The CDR tenantid was being set in cdr_object_alloc from the channel->base
snapshot. Since this happens at channel creation before the dialplan is even
reached, calls to `CHANNEL(tenantid)=<something>` in the dialplan were being
ignored. Instead we now take tenantid from party_a when
cdr_object_create_public_records() is called which is after the call has
ended and all channel snapshots rebuilt. This is exactly how accountcode
and amaflags, which can also be set in tha dialplpan, are handled.
Resolves: #1259
When using the "D" option to output interleaved audio, the file extension
must be ".raw". That info wasn't being properly rendered in the markdown
and HTML on the documentation site. The XML was updated to move the
note in the option section to a warning in the description.
Resolves: #1269
Previously, we were only using # (ST) as a terminator, and not handling
A (STP), B (ST2P), or C (ST3P), which erroneously led to it being
treated as part of the dialed number. Parse any of these as the start
digit.
Resolves: #1301
Commit 9c1f34c7e9 added dedicated options
for random sorting functionality and deprecated older options that
now duplicated these capabilities. Remove these deprecated options.
Resolves: #1296
UpgradeNote: The deprecated random and application=r options have
been removed; use sort=random instead.
DeadAGI was deprecated 7 years ago, in Asterisk 15,
as it duplicates functionality in the AGI app.
This removes the application.
Resolves: #258
UpgradeNote: The DeadAGI application, which was
deprecated in Asterisk 15, has now been removed.
The same functionality is available in the AGI app.
In the WebSocket channel driver, the FLUSH_MEDIA command clears all frames from
the queue but does not reset the frame_queue_length counter.
As a result, the driver incorrectly thinks the queue is full after flushing,
which prevents new multimedia frames from being sent, especially after multiple
flush commands.
This fix sets frame_queue_length to 0 after flushing, ensuring the queue state
is consistent with its actual content.
Fixes: #1304
When the callback() API was invoked but no channel passed the test, callback
would return the last channel tested instead of NULL. It now correctly
returns NULL when no channel matches.
Resolves: #1288
