kenmirrors/asterisk
1
0
Fork 0
mirror of https://github.com/asterisk/asterisk.git synced 2025-10-31 10:47:18 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
4d522da4aad7148fc43cdc9ff94e0de65b13cc33
asterisk/channels/chan_usbradio.c
Luigi Rizzo 0595b5e2aa include "logger.h" and errno.h from asterisk.h - usage shows that they 
were included almost everywhere.
Remove some of the instances.



git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89424 65c4cc65-6c06-0410-ace0-fbb531ad65f3
2007-11-19 18:52:04 +00:00

2840 lines
75 KiB
C
Raw Blame History

/*
* Asterisk -- An open source telephony toolkit.
*
* Copyright (C) 1999 - 2005, Digium, Inc.
* Copyright (C) 2007, Jim Dixon
*
* Jim Dixon, WB6NIL <jim@lambdatel.com>
* Steve Henke, W9SH <w9sh@arrl.net>
* Based upon work by Mark Spencer <markster@digium.com> and Luigi Rizzo
*
* See http://www.asterisk.org for more information about
* the Asterisk project. Please do not directly contact
* any of the maintainers of this project for assistance;
* the project provides a web site, mailing lists and IRC
* channels for your use.
*
* This program is free software, distributed under the terms of
* the GNU General Public License Version 2. See the LICENSE file
* at the top of the source tree.
*/
/*! \file
*
* \brief Channel driver for CM108 USB Cards with Radio Interface
*
* \author Jim Dixon <jim@lambdatel.com>
* \author Steve Henke <w9sh@arrl.net>
*
* \par See also
* \arg \ref Config_usbradio
*
* \ingroup channel_drivers
*/
/*** MODULEINFO
<depend>asound</depend>
<depend>usb</depend>
<defaultenabled>no</defaultenabled>
***/
#include "asterisk.h"
ASTERISK_FILE_VERSION(__FILE__, "$Revision$")
#include <ctype.h>
#include <math.h>
#include <sys/ioctl.h>
#include <fcntl.h>
#include <sys/time.h>
#include <usb.h>
#include <alsa/asoundlib.h>
#define CHAN_USBRADIO 1
#define DEBUG_USBRADIO 0
#define DEBUG_CAPTURES 1
#define DEBUG_CAP_RX_OUT 0
#define DEBUG_CAP_TX_OUT 0
#define DEBUG_FILETEST 0
#define RX_CAP_RAW_FILE "/tmp/rx_cap_in.pcm"
#define RX_CAP_TRACE_FILE "/tmp/rx_trace.pcm"
#define RX_CAP_OUT_FILE "/tmp/rx_cap_out.pcm"
#define TX_CAP_RAW_FILE "/tmp/tx_cap_in.pcm"
#define TX_CAP_TRACE_FILE "/tmp/tx_trace.pcm"
#define TX_CAP_OUT_FILE "/tmp/tx_cap_out.pcm"
#define MIXER_PARAM_MIC_PLAYBACK_SW "Mic Playback Switch"
#define MIXER_PARAM_MIC_PLAYBACK_VOL "Mic Playback Volume"
#define MIXER_PARAM_MIC_CAPTURE_SW "Mic Capture Switch"
#define MIXER_PARAM_MIC_CAPTURE_VOL "Mic Capture Volume"
#define MIXER_PARAM_MIC_BOOST "Auto Gain Control"
#define MIXER_PARAM_SPKR_PLAYBACK_SW "Speaker Playback Switch"
#define MIXER_PARAM_SPKR_PLAYBACK_VOL "Speaker Playback Volume"
#include "./xpmr/xpmr.h"
#if 0
#define traceusb1(a) {printf a;}
#else
#define traceusb1(a)
#endif
#if 0
#define traceusb2(a) {printf a;}
#else
#define traceusb2(a)
#endif
#ifdef __linux
#include <linux/soundcard.h>
#elif defined(__FreeBSD__)
#include <sys/soundcard.h>
#else
#include <soundcard.h>
#endif
#include "asterisk/lock.h"
#include "asterisk/frame.h"
#include "asterisk/callerid.h"
#include "asterisk/channel.h"
#include "asterisk/module.h"
#include "asterisk/options.h"
#include "asterisk/pbx.h"
#include "asterisk/config.h"
#include "asterisk/cli.h"
#include "asterisk/utils.h"
#include "asterisk/causes.h"
#include "asterisk/endian.h"
#include "asterisk/stringfields.h"
#include "asterisk/abstract_jb.h"
#include "asterisk/musiconhold.h"
#include "asterisk/dsp.h"
/* ringtones we use */
#include "busy.h"
#include "ringtone.h"
#include "ring10.h"
#include "answer.h"
#define C108_VENDOR_ID 0x0d8c
#define C108_PRODUCT_ID 0x000c
#define C108_HID_INTERFACE 3
#define HID_REPORT_GET 0x01
#define HID_REPORT_SET 0x09
#define HID_RT_INPUT 0x01
#define HID_RT_OUTPUT 0x02
/*! Global jitterbuffer configuration - by default, jb is disabled */
static struct ast_jb_conf default_jbconf =
{
.flags = 0,
.max_size = -1,
.resync_threshold = -1,
.impl = "",
};
static struct ast_jb_conf global_jbconf;
/*
* usbradio.conf parameters are
START_CONFIG
[general]
; General config options, with default values shown.
; You should use one section per device, with [general] being used
; for the device.
;
;
; debug = 0x0 ; misc debug flags, default is 0
; Set the device to use for I/O
; devicenum = 0
; Set hardware type here
; hdwtype=0 ; 0=limey, 1=sph
; rxboostset=0 ; no rx gain boost
; rxctcssrelax=1 ; reduce talkoff from radios w/o CTCSS Tx HPF
; rxctcssfreq=100.0 ; rx ctcss freq in floating point. must be in table
; txctcssfreq=100.0 ; tx ctcss freq, any frequency permitted
; carrierfrom=dsp ;no,usb,usbinvert,dsp,vox
; ctcssfrom=dsp ;no,usb,dsp
; rxdemod=flat ; input type from radio: no,speaker,flat
; txprelim=yes ; output is pre-emphasised and limited
; txtoctype=no ; no,phase,notone
; txmixa=composite ;no,voice,tone,composite,auxvoice
; txmixb=no ;no,voice,tone,composite,auxvoice
; invertptt=0
;------------------------------ JITTER BUFFER CONFIGURATION --------------------------
; jbenable = yes ; Enables the use of a jitterbuffer on the receiving side of an
; USBRADIO channel. Defaults to "no". An enabled jitterbuffer will
; be used only if the sending side can create and the receiving
; side can not accept jitter. The USBRADIO channel can't accept jitter,
; thus an enabled jitterbuffer on the receive USBRADIO side will always
; be used if the sending side can create jitter.
; jbmaxsize = 200 ; Max length of the jitterbuffer in milliseconds.
; jbresyncthreshold = 1000 ; Jump in the frame timestamps over which the jitterbuffer is
; resynchronized. Useful to improve the quality of the voice, with
; big jumps in/broken timestamps, usualy sent from exotic devices
; and programs. Defaults to 1000.
; jbimpl = fixed ; Jitterbuffer implementation, used on the receiving side of an USBRADIO
; channel. Two implementations are currenlty available - "fixed"
; (with size always equals to jbmax-size) and "adaptive" (with
; variable size, actually the new jb of IAX2). Defaults to fixed.
; jblog = no ; Enables jitterbuffer frame logging. Defaults to "no".
;-----------------------------------------------------------------------------------
END_CONFIG
*/
/*
* Helper macros to parse config arguments. They will go in a common
* header file if their usage is globally accepted. In the meantime,
* we define them here. Typical usage is as below.
* Remember to open a block right before M_START (as it declares
* some variables) and use the M_* macros WITHOUT A SEMICOLON:
*
* {
* M_START(v->name, v->value)
*
* M_BOOL("dothis", x->flag1)
* M_STR("name", x->somestring)
* M_F("bar", some_c_code)
* M_END(some_final_statement)
* ... other code in the block
* }
*
* XXX NOTE these macros should NOT be replicated in other parts of asterisk.
* Likely we will come up with a better way of doing config file parsing.
*/
#define M_START(var, val) \
char *__s = var; char *__val = val;
#define M_END(x) x;
#define M_F(tag, f) if (!strcasecmp((__s), tag)) { f; } else
#define M_BOOL(tag, dst) M_F(tag, (dst) = ast_true(__val) )
#define M_UINT(tag, dst) M_F(tag, (dst) = strtoul(__val, NULL, 0) )
#define M_STR(tag, dst) M_F(tag, ast_copy_string(dst, __val, sizeof(dst)))
/*
* The following parameters are used in the driver:
*
* FRAME_SIZE the size of an audio frame, in samples.
* 160 is used almost universally, so you should not change it.
*
* FRAGS the argument for the SETFRAGMENT ioctl.
* Overridden by the 'frags' parameter in usbradio.conf
*
* Bits 0-7 are the base-2 log of the device's block size,
* bits 16-31 are the number of blocks in the driver's queue.
* There are a lot of differences in the way this parameter
* is supported by different drivers, so you may need to
* experiment a bit with the value.
* A good default for linux is 30 blocks of 64 bytes, which
* results in 6 frames of 320 bytes (160 samples).
* FreeBSD works decently with blocks of 256 or 512 bytes,
* leaving the number unspecified.
* Note that this only refers to the device buffer size,
* this module will then try to keep the lenght of audio
* buffered within small constraints.
*
* QUEUE_SIZE The max number of blocks actually allowed in the device
* driver's buffer, irrespective of the available number.
* Overridden by the 'queuesize' parameter in usbradio.conf
*
* Should be >=2, and at most as large as the hw queue above
* (otherwise it will never be full).
*/
#define FRAME_SIZE 160
#define QUEUE_SIZE 20
#if defined(__FreeBSD__)
#define FRAGS 0x8
#else
#define FRAGS ( ( (6 * 5) << 16 ) | 0xc )
#endif
/*
* XXX text message sizes are probably 256 chars, but i am
* not sure if there is a suitable definition anywhere.
*/
#define TEXT_SIZE 256
#if 0
#define TRYOPEN 1 /* try to open on startup */
#endif
#define O_CLOSE 0x444 /* special 'close' mode for device */
/* Which device to use */
#if defined( __OpenBSD__ ) || defined( __NetBSD__ )
#define DEV_DSP "/dev/audio"
#else
#define DEV_DSP "/dev/dsp"
#endif
#ifndef MIN
#define MIN(a,b) ((a) < (b) ? (a) : (b))
#endif
#ifndef MAX
#define MAX(a,b) ((a) > (b) ? (a) : (b))
#endif
static char *config = "usbradio.conf"; /* default config file */
static char *config1 = "usbradio_tune.conf"; /* tune config file */
static FILE *frxcapraw = NULL, *frxcaptrace = NULL, *frxoutraw = NULL;
static FILE *ftxcapraw = NULL, *ftxcaptrace = NULL, *ftxoutraw = NULL;
static int usbradio_debug;
#if 0 //maw asdf sph
static int usbradio_debug_level = 0;
#endif
enum {RX_AUDIO_NONE,RX_AUDIO_SPEAKER,RX_AUDIO_FLAT};
enum {CD_IGNORE,CD_XPMR_NOISE,CD_XPMR_VOX,CD_HID,CD_HID_INVERT};
enum {SD_IGNORE,SD_HID,SD_HID_INVERT,SD_XPMR}; // no,external,externalinvert,software
enum {RX_KEY_CARRIER,RX_KEY_CARRIER_CODE};
enum {TX_OUT_OFF,TX_OUT_VOICE,TX_OUT_LSD,TX_OUT_COMPOSITE,TX_OUT_AUX};
enum {TOC_NONE,TOC_PHASE,TOC_NOTONE};
/* DECLARE STRUCTURES */
/*
* Each sound is made of 'datalen' samples of sound, repeated as needed to
* generate 'samplen' samples of data, then followed by 'silencelen' samples
* of silence. The loop is repeated if 'repeat' is set.
*/
struct sound {
int ind;
char *desc;
short *data;
int datalen;
int samplen;
int silencelen;
int repeat;
};
static struct sound sounds[] = {
{ AST_CONTROL_RINGING, "RINGING", ringtone, sizeof(ringtone)/2, 16000, 32000, 1 },
{ AST_CONTROL_BUSY, "BUSY", busy, sizeof(busy)/2, 4000, 4000, 1 },
{ AST_CONTROL_CONGESTION, "CONGESTION", busy, sizeof(busy)/2, 2000, 2000, 1 },
{ AST_CONTROL_RING, "RING10", ring10, sizeof(ring10)/2, 16000, 32000, 1 },
{ AST_CONTROL_ANSWER, "ANSWER", answer, sizeof(answer)/2, 2200, 0, 0 },
{ -1, NULL, 0, 0, 0, 0 }, /* end marker */
};
/*
* descriptor for one of our channels.
* There is one used for 'default' values (from the [general] entry in
* the configuration file), and then one instance for each device
* (the default is cloned from [general], others are only created
* if the relevant section exists).
*/
struct chan_usbradio_pvt {
struct chan_usbradio_pvt *next;
char *name;
/*
* cursound indicates which in struct sound we play. -1 means nothing,
* any other value is a valid sound, in which case sampsent indicates
* the next sample to send in [0..samplen + silencelen]
* nosound is set to disable the audio data from the channel
* (so we can play the tones etc.).
*/
int sndcmd[2]; /* Sound command pipe */
int cursound; /* index of sound to send */
int sampsent; /* # of sound samples sent */
int nosound; /* set to block audio from the PBX */
int total_blocks; /* total blocks in the output device */
int sounddev;
enum { M_UNSET, M_FULL, M_READ, M_WRITE } duplex;
i16 cdMethod;
int autoanswer;
int autohangup;
int hookstate;
unsigned int queuesize; /* max fragments in queue */
unsigned int frags; /* parameter for SETFRAGMENT */
int warned; /* various flags used for warnings */
#define WARN_used_blocks 1
#define WARN_speed 2
#define WARN_frag 4
int w_errors; /* overfull in the write path */
struct timeval lastopen;
int overridecontext;
int mute;
/* boost support. BOOST_SCALE * 10 ^(BOOST_MAX/20) must
* be representable in 16 bits to avoid overflows.
*/
#define BOOST_SCALE (1<<9)
#define BOOST_MAX 40 /* slightly less than 7 bits */
int boost; /* input boost, scaled by BOOST_SCALE */
char devicenum;
int spkrmax;
int micmax;
pthread_t sthread;
pthread_t hidthread;
int stophid;
struct ast_channel *owner;
char ext[AST_MAX_EXTENSION];
char ctx[AST_MAX_CONTEXT];
char language[MAX_LANGUAGE];
char cid_name[256]; /*XXX */
char cid_num[256]; /*XXX */
char mohinterpret[MAX_MUSICCLASS];
/* buffers used in usbradio_write, 2 per int by 2 channels by 6 times oversampling (48KS/s) */
char usbradio_write_buf[FRAME_SIZE * 2 * 2 * 6];
char usbradio_write_buf_1[FRAME_SIZE * 2 * 2* 6];
int usbradio_write_dst;
/* buffers used in usbradio_read - AST_FRIENDLY_OFFSET space for headers
* plus enough room for a full frame
*/
char usbradio_read_buf[FRAME_SIZE * (2 * 12) + AST_FRIENDLY_OFFSET];
char usbradio_read_buf_8k[FRAME_SIZE * 2 + AST_FRIENDLY_OFFSET];
int readpos; /* read position above */
struct ast_frame read_f; /* returned by usbradio_read */
char debuglevel;
char radioduplex; //
char lastrx;
char rxhidsq;
char rxcarrierdetect; // status from pmr channel
char rxctcssdecode; // status from pmr channel
char rxkeytype;
char rxkeyed; // indicates rx signal present
char lasttx;
char txkeyed; // tx key request from upper layers
char txchankey;
char txtestkey;
time_t lasthidtime;
struct ast_dsp *dsp;
t_pmr_chan *pmrChan;
char rxcpusaver;
char txcpusaver;
char rxdemod;
float rxgain;
char rxcdtype;
char rxsdtype;
int rxsquelchadj; /* this copy needs to be here for initialization */
char txtoctype;
char txprelim;
float txctcssgain;
char txmixa;
char txmixb;
char invertptt;
char rxctcssrelax;
float rxctcssgain;
float rxctcssfreq;
float txctcssfreq;
int rxmixerset;
int rxboostset;
float rxvoiceadj;
float rxctcssadj;
int txmixaset;
int txmixbset;
int txctcssadj;
int hdwtype;
int hid_gpio_ctl;
int hid_gpio_ctl_loc;
int hid_io_cor;
int hid_io_cor_loc;
int hid_io_ctcss;
int hid_io_ctcss_loc;
int hid_io_ptt;
int hid_gpio_loc;
struct {
unsigned rxcapraw:1;
unsigned txcapraw:1;
unsigned txcap2:1;
unsigned rxcap2:1;
}b;
};
// maw add additional defaults !!!
static struct chan_usbradio_pvt usbradio_default = {
.cursound = -1,
.sounddev = -1,
.duplex = M_UNSET, /* XXX check this */
.autoanswer = 1,
.autohangup = 1,
.queuesize = QUEUE_SIZE,
.frags = FRAGS,
.ext = "s",
.ctx = "default",
.readpos = AST_FRIENDLY_OFFSET, /* start here on reads */
.lastopen = { 0, 0 },
.boost = BOOST_SCALE,
};
/* DECLARE FUNCTION PROTOTYPES */
static void store_txtoctype(struct chan_usbradio_pvt *o, char *s);
static int hidhdwconfig(struct chan_usbradio_pvt *o);
static int set_txctcss_level(struct chan_usbradio_pvt *o);
static void pmrdump(struct chan_usbradio_pvt *o);
static void mult_set(struct chan_usbradio_pvt *o);
static int mult_calc(int value);
static void mixer_write(struct chan_usbradio_pvt *o);
static void tune_rxinput(struct chan_usbradio_pvt *o);
static void tune_rxvoice(struct chan_usbradio_pvt *o);
static void tune_rxctcss(struct chan_usbradio_pvt *o);
static void tune_txoutput(struct chan_usbradio_pvt *o, int value);
static void tune_write(struct chan_usbradio_pvt *o);
static char *usbradio_active; /* the active device */
static int setformat(struct chan_usbradio_pvt *o, int mode);
static struct ast_channel *usbradio_request(const char *type, int format, void *data
, int *cause);
static int usbradio_digit_begin(struct ast_channel *c, char digit);
static int usbradio_digit_end(struct ast_channel *c, char digit, unsigned int duration);
static int usbradio_text(struct ast_channel *c, const char *text);
static int usbradio_hangup(struct ast_channel *c);
static int usbradio_answer(struct ast_channel *c);
static struct ast_frame *usbradio_read(struct ast_channel *chan);
static int usbradio_call(struct ast_channel *c, char *dest, int timeout);
static int usbradio_write(struct ast_channel *chan, struct ast_frame *f);
static int usbradio_indicate(struct ast_channel *chan, int cond, const void *data, size_t datalen);
static int usbradio_fixup(struct ast_channel *oldchan, struct ast_channel *newchan);
#if DEBUG_FILETEST == 1
static int RxTestIt(struct chan_usbradio_pvt *o);
#endif
static char tdesc[] = "USB (CM108) Radio Channel Driver";
static const struct ast_channel_tech usbradio_tech = {
.type = "Radio",
.description = tdesc,
.capabilities = AST_FORMAT_SLINEAR,
.requester = usbradio_request,
.send_digit_begin = usbradio_digit_begin,
.send_digit_end = usbradio_digit_end,
.send_text = usbradio_text,
.hangup = usbradio_hangup,
.answer = usbradio_answer,
.read = usbradio_read,
.call = usbradio_call,
.write = usbradio_write,
.indicate = usbradio_indicate,
.fixup = usbradio_fixup,
};
/* Call with: devnum: alsa major device number, param: ascii Formal
Parameter Name, val1, first or only value, val2 second value, or 0
if only 1 value. Values: 0-99 (percent) or 0-1 for baboon.
Note: must add -lasound to end of linkage */
static int amixer_max(int devnum,char *param)
{
int rv,type;
char str[100];
snd_hctl_t *hctl;
snd_ctl_elem_id_t *id;
snd_hctl_elem_t *elem;
snd_ctl_elem_info_t *info;
sprintf(str,"hw:%d",devnum);
if (snd_hctl_open(&hctl, str, 0)) return(-1);
snd_hctl_load(hctl);
snd_ctl_elem_id_alloca(&id);
snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_MIXER);
snd_ctl_elem_id_set_name(id, param);
elem = snd_hctl_find_elem(hctl, id);
if (!elem)
{
snd_hctl_close(hctl);
return(-1);
}
snd_ctl_elem_info_alloca(&info);
snd_hctl_elem_info(elem,info);
type = snd_ctl_elem_info_get_type(info);
rv = 0;
switch(type)
{
case SND_CTL_ELEM_TYPE_INTEGER:
rv = snd_ctl_elem_info_get_max(info);
break;
case SND_CTL_ELEM_TYPE_BOOLEAN:
rv = 1;
break;
}
snd_hctl_close(hctl);
return(rv);
}
/* Call with: devnum: alsa major device number, param: ascii Formal
Parameter Name, val1, first or only value, val2 second value, or 0
if only 1 value. Values: 0-99 (percent) or 0-1 for baboon.
Note: must add -lasound to end of linkage */
static int setamixer(int devnum,char *param, int v1, int v2)
{
int type;
char str[100];
snd_hctl_t *hctl;
snd_ctl_elem_id_t *id;
snd_ctl_elem_value_t *control;
snd_hctl_elem_t *elem;
snd_ctl_elem_info_t *info;
sprintf(str,"hw:%d",devnum);
if (snd_hctl_open(&hctl, str, 0)) return(-1);
snd_hctl_load(hctl);
snd_ctl_elem_id_alloca(&id);
snd_ctl_elem_id_set_interface(id, SND_CTL_ELEM_IFACE_MIXER);
snd_ctl_elem_id_set_name(id, param);
elem = snd_hctl_find_elem(hctl, id);
if (!elem)
{
snd_hctl_close(hctl);
return(-1);
}
snd_ctl_elem_info_alloca(&info);
snd_hctl_elem_info(elem,info);
type = snd_ctl_elem_info_get_type(info);
snd_ctl_elem_value_alloca(&control);
snd_ctl_elem_value_set_id(control, id);
switch(type)
{
case SND_CTL_ELEM_TYPE_INTEGER:
snd_ctl_elem_value_set_integer(control, 0, v1);
if (v2 > 0) snd_ctl_elem_value_set_integer(control, 1, v2);
break;
case SND_CTL_ELEM_TYPE_BOOLEAN:
snd_ctl_elem_value_set_integer(control, 0, (v1 != 0));
break;
}
if (snd_hctl_elem_write(elem, control))
{
snd_hctl_close(hctl);
return(-1);
}
snd_hctl_close(hctl);
return(0);
}
static void hid_set_outputs(struct usb_dev_handle *handle,
unsigned char *outputs)
{
usb_control_msg(handle,
USB_ENDPOINT_OUT + USB_TYPE_CLASS + USB_RECIP_INTERFACE,
HID_REPORT_SET,
0 + (HID_RT_OUTPUT << 8),
C108_HID_INTERFACE,
(char*)outputs, 4, 5000);
}
static void hid_get_inputs(struct usb_dev_handle *handle,
unsigned char *inputs)
{
usb_control_msg(handle,
USB_ENDPOINT_IN + USB_TYPE_CLASS + USB_RECIP_INTERFACE,
HID_REPORT_GET,
0 + (HID_RT_INPUT << 8),
C108_HID_INTERFACE,
(char*)inputs, 4, 5000);
}
static struct usb_device *hid_device_init(void)
{
struct usb_bus *usb_bus;
struct usb_device *dev;
usb_init();
usb_find_busses();
usb_find_devices();
for (usb_bus = usb_busses;
usb_bus;
usb_bus = usb_bus->next) {
for (dev = usb_bus->devices;
dev;
dev = dev->next) {
if ((dev->descriptor.idVendor
== C108_VENDOR_ID) &&
(dev->descriptor.idProduct
== C108_PRODUCT_ID))
return dev;
}
}
return NULL;
}
static int hidhdwconfig(struct chan_usbradio_pvt *o)
{
if(o->hdwtype==1) //sphusb
{
o->hid_gpio_ctl = 0x08; /* set GPIO4 to output mode */
o->hid_gpio_ctl_loc = 2; /* For CTL of GPIO */
o->hid_io_cor = 4; /* GPIO3 is COR */
o->hid_io_cor_loc = 1; /* GPIO3 is COR */
o->hid_io_ctcss = 2; /* GPIO 2 is External CTCSS */
o->hid_io_ctcss_loc = 1; /* is GPIO 2 */
o->hid_io_ptt = 8; /* GPIO 4 is PTT */
o->hid_gpio_loc = 1; /* For ALL GPIO */
}
else if(o->hdwtype==0) //dudeusb
{
o->hid_gpio_ctl = 0x0c; /* set GPIO 3 & 4 to output mode */
o->hid_gpio_ctl_loc = 2; /* For CTL of GPIO */
o->hid_io_cor = 2; /* VOLD DN is COR */
o->hid_io_cor_loc = 0; /* VOL DN COR */
o->hid_io_ctcss = 2; /* GPIO 2 is External CTCSS */
o->hid_io_ctcss_loc = 1; /* is GPIO 2 */
o->hid_io_ptt = 4; /* GPIO 3 is PTT */
o->hid_gpio_loc = 1; /* For ALL GPIO */
}
else if(o->hdwtype==3) // custom version
{
o->hid_gpio_ctl = 0x0c; /* set GPIO 3 & 4 to output mode */
o->hid_gpio_ctl_loc = 2; /* For CTL of GPIO */
o->hid_io_cor = 2; /* VOLD DN is COR */
o->hid_io_cor_loc = 0; /* VOL DN COR */
o->hid_io_ctcss = 2; /* GPIO 2 is External CTCSS */
o->hid_io_ctcss_loc = 1; /* is GPIO 2 */
o->hid_io_ptt = 4; /* GPIO 3 is PTT */
o->hid_gpio_loc = 1; /* For ALL GPIO */
}
return 0;
}
static void *hidthread(void *arg)
{
unsigned char buf[4],keyed;
char lastrx, txtmp;
struct usb_device *usb_dev;
struct usb_dev_handle *usb_handle;
struct chan_usbradio_pvt *o = (struct chan_usbradio_pvt *) arg;
usb_dev = hid_device_init();
if (usb_dev == NULL) {
ast_log(LOG_ERROR,"USB HID device not found\n");
pthread_exit(NULL);
}
usb_handle = usb_open(usb_dev);
if (usb_handle == NULL) {
ast_log(LOG_ERROR,"Not able to open USB device\n");
pthread_exit(NULL);
}
if (usb_claim_interface(usb_handle,C108_HID_INTERFACE) < 0)
{
if (usb_detach_kernel_driver_np(usb_handle,C108_HID_INTERFACE) < 0) {
ast_log(LOG_ERROR,"Not able to detach the USB device\n");
pthread_exit(NULL);
}
if (usb_claim_interface(usb_handle,C108_HID_INTERFACE) < 0) {
ast_log(LOG_ERROR,"Not able to claim the USB device\n");
pthread_exit(NULL);
}
}
memset(buf,0,sizeof(buf));
buf[2] = o->hid_gpio_ctl;
buf[1] = 0;
hid_set_outputs(usb_handle,buf);
traceusb1(("hidthread: Starting normally!!\n"));
lastrx = 0;
while(!o->stophid)
{
buf[o->hid_gpio_ctl_loc] = o->hid_gpio_ctl;
hid_get_inputs(usb_handle,buf);
keyed = !(buf[o->hid_io_cor_loc] & o->hid_io_cor);
if (keyed != o->rxhidsq)
{
if(o->debuglevel)printf("chan_usbradio() hidthread: update rxhidsq = %d\n",keyed);
o->rxhidsq=keyed;
}
/* if change in tx stuff */
txtmp=0;
if(o->txkeyed || o->txchankey || o->txtestkey || o->pmrChan->txPttOut) txtmp=1;
if (o->lasttx != txtmp)
{
o->lasttx = txtmp;
if(o->debuglevel)printf("hidthread: tx set to %d\n",txtmp);
buf[o->hid_gpio_loc] = 0;
if (txtmp) buf[o->hid_gpio_loc] = o->hid_io_ptt;
buf[o->hid_gpio_ctl_loc] = o->hid_gpio_ctl;
hid_set_outputs(usb_handle,buf);
}
time(&o->lasthidtime);
usleep(50000);
}
buf[o->hid_gpio_loc] = 0;
if (o->invertptt) buf[o->hid_gpio_loc] = o->hid_io_ptt;
buf[o->hid_gpio_ctl_loc] = o->hid_gpio_ctl;
hid_set_outputs(usb_handle,buf);
pthread_exit(0);
}
/*
* returns a pointer to the descriptor with the given name
*/
static struct chan_usbradio_pvt *find_desc(char *dev)
{
struct chan_usbradio_pvt *o = NULL;
if (!dev)
ast_log(LOG_WARNING, "null dev\n");
for (o = usbradio_default.next; o && o->name && dev && strcmp(o->name, dev) != 0; o = o->next);
if (!o)
ast_log(LOG_WARNING, "could not find <%s>\n", dev ? dev : "--no-device--");
return o;
}
/*
* split a string in extension-context, returns pointers to malloc'ed
* strings.
* If we do not have 'overridecontext' then the last @ is considered as
* a context separator, and the context is overridden.
* This is usually not very necessary as you can play with the dialplan,
* and it is nice not to need it because you have '@' in SIP addresses.
* Return value is the buffer address.
*/
#if 0
static char *ast_ext_ctx(const char *src, char **ext, char **ctx)
{
struct chan_usbradio_pvt *o = find_desc(usbradio_active);
if (ext == NULL || ctx == NULL)
return NULL; /* error */
*ext = *ctx = NULL;
if (src && *src != '\0')
*ext = ast_strdup(src);
if (*ext == NULL)
return NULL;
if (!o->overridecontext) {
/* parse from the right */
*ctx = strrchr(*ext, '@');
if (*ctx)
*(*ctx)++ = '\0';
}
return *ext;
}
#endif
/*
* Returns the number of blocks used in the audio output channel
*/
static int used_blocks(struct chan_usbradio_pvt *o)
{
struct audio_buf_info info;
if (ioctl(o->sounddev, SNDCTL_DSP_GETOSPACE, &info)) {
if (!(o->warned & WARN_used_blocks)) {
ast_log(LOG_WARNING, "Error reading output space\n");
o->warned |= WARN_used_blocks;
}
return 1;
}
if (o->total_blocks == 0) {
if (0) /* debugging */
ast_log(LOG_WARNING, "fragtotal %d size %d avail %d\n", info.fragstotal, info.fragsize, info.fragments);
o->total_blocks = info.fragments;
}
return o->total_blocks - info.fragments;
}
/* Write an exactly FRAME_SIZE sized frame */
static int soundcard_writeframe(struct chan_usbradio_pvt *o, short *data)
{
int res;
if (o->sounddev < 0)
setformat(o, O_RDWR);
if (o->sounddev < 0)
return 0; /* not fatal */
/*
* Nothing complex to manage the audio device queue.
* If the buffer is full just drop the extra, otherwise write.
* XXX in some cases it might be useful to write anyways after
* a number of failures, to restart the output chain.
*/
res = used_blocks(o);
if (res > o->queuesize) { /* no room to write a block */
if (o->w_errors++ == 0 && (usbradio_debug & 0x4))
ast_log(LOG_WARNING, "write: used %d blocks (%d)\n", res, o->w_errors);
return 0;
}
o->w_errors = 0;
return write(o->sounddev, ((void *) data), FRAME_SIZE * 2 * 12);
}
/*
* Handler for 'sound writable' events from the sound thread.
* Builds a frame from the high level description of the sounds,
* and passes it to the audio device.
* The actual sound is made of 1 or more sequences of sound samples
* (s->datalen, repeated to make s->samplen samples) followed by
* s->silencelen samples of silence. The position in the sequence is stored
* in o->sampsent, which goes between 0 .. s->samplen+s->silencelen.
* In case we fail to write a frame, don't update o->sampsent.
*/
static void send_sound(struct chan_usbradio_pvt *o)
{
short myframe[FRAME_SIZE];
int ofs, l, start;
int l_sampsent = o->sampsent;
struct sound *s;
if (o->cursound < 0) /* no sound to send */
return;
s = &sounds[o->cursound];
for (ofs = 0; ofs < FRAME_SIZE; ofs += l) {
l = s->samplen - l_sampsent; /* # of available samples */
if (l > 0) {
start = l_sampsent % s->datalen; /* source offset */
if (l > FRAME_SIZE - ofs) /* don't overflow the frame */
l = FRAME_SIZE - ofs;
if (l > s->datalen - start) /* don't overflow the source */
l = s->datalen - start;
bcopy(s->data + start, myframe + ofs, l * 2);
if (0)
ast_log(LOG_WARNING, "send_sound sound %d/%d of %d into %d\n", l_sampsent, l, s->samplen, ofs);
l_sampsent += l;
} else { /* end of samples, maybe some silence */
static const short silence[FRAME_SIZE] = { 0, };
l += s->silencelen;
if (l > 0) {
if (l > FRAME_SIZE - ofs)
l = FRAME_SIZE - ofs;
bcopy(silence, myframe + ofs, l * 2);
l_sampsent += l;
} else { /* silence is over, restart sound if loop */
if (s->repeat == 0) { /* last block */
o->cursound = -1;
o->nosound = 0; /* allow audio data */
if (ofs < FRAME_SIZE) /* pad with silence */
bcopy(silence, myframe + ofs, (FRAME_SIZE - ofs) * 2);
}
l_sampsent = 0;
}
}
}
l = soundcard_writeframe(o, myframe);
if (l > 0)
o->sampsent = l_sampsent; /* update status */
}
static void *sound_thread(void *arg)
{
char ign[4096];
struct chan_usbradio_pvt *o = (struct chan_usbradio_pvt *) arg;
/*
* Just in case, kick the driver by trying to read from it.
* Ignore errors - this read is almost guaranteed to fail.
*/
read(o->sounddev, ign, sizeof(ign));
for (;;) {
fd_set rfds, wfds;
int maxfd, res;
FD_ZERO(&rfds);
FD_ZERO(&wfds);
FD_SET(o->sndcmd[0], &rfds);
maxfd = o->sndcmd[0]; /* pipe from the main process */
if (o->cursound > -1 && o->sounddev < 0)
setformat(o, O_RDWR); /* need the channel, try to reopen */
else if (o->cursound == -1 && o->owner == NULL)
{
setformat(o, O_CLOSE); /* can close */
}
if (o->sounddev > -1) {
if (!o->owner) { /* no one owns the audio, so we must drain it */
FD_SET(o->sounddev, &rfds);
maxfd = MAX(o->sounddev, maxfd);
}
if (o->cursound > -1) {
FD_SET(o->sounddev, &wfds);
maxfd = MAX(o->sounddev, maxfd);
}
}
/* ast_select emulates linux behaviour in terms of timeout handling */
res = ast_select(maxfd + 1, &rfds, &wfds, NULL, NULL);
if (res < 1) {
ast_log(LOG_WARNING, "select failed: %s\n", strerror(errno));
sleep(1);
continue;
}
if (FD_ISSET(o->sndcmd[0], &rfds)) {
/* read which sound to play from the pipe */
int i, what = -1;
read(o->sndcmd[0], &what, sizeof(what));
for (i = 0; sounds[i].ind != -1; i++) {
if (sounds[i].ind == what) {
o->cursound = i;
o->sampsent = 0;
o->nosound = 1; /* block audio from pbx */
break;
}
}
if (sounds[i].ind == -1)
ast_log(LOG_WARNING, "invalid sound index: %d\n", what);
}
if (o->sounddev > -1) {
if (FD_ISSET(o->sounddev, &rfds)) /* read and ignore errors */
read(o->sounddev, ign, sizeof(ign));
if (FD_ISSET(o->sounddev, &wfds))
send_sound(o);
}
}
return NULL; /* Never reached */
}
/*
* reset and close the device if opened,
* then open and initialize it in the desired mode,
* trigger reads and writes so we can start using it.
*/
static int setformat(struct chan_usbradio_pvt *o, int mode)
{
int fmt, desired, res, fd;
char device[100];
if (o->sounddev >= 0) {
ioctl(o->sounddev, SNDCTL_DSP_RESET, 0);
close(o->sounddev);
o->duplex = M_UNSET;
o->sounddev = -1;
}
if (mode == O_CLOSE) /* we are done */
return 0;
if (ast_tvdiff_ms(ast_tvnow(), o->lastopen) < 1000)
return -1; /* don't open too often */
o->lastopen = ast_tvnow();
strcpy(device,"/dev/dsp");
if (o->devicenum)
sprintf(device,"/dev/dsp%d",o->devicenum);
fd = o->sounddev = open(device, mode | O_NONBLOCK);
if (fd < 0) {
ast_log(LOG_WARNING, "Unable to re-open DSP device %d: %s\n", o->devicenum, strerror(errno));
return -1;
}
if (o->owner)
o->owner->fds[0] = fd;
#if __BYTE_ORDER == __LITTLE_ENDIAN
fmt = AFMT_S16_LE;
#else
fmt = AFMT_S16_BE;
#endif
res = ioctl(fd, SNDCTL_DSP_SETFMT, &fmt);
if (res < 0) {
ast_log(LOG_WARNING, "Unable to set format to 16-bit signed\n");
return -1;
}
switch (mode) {
case O_RDWR:
res = ioctl(fd, SNDCTL_DSP_SETDUPLEX, 0);
/* Check to see if duplex set (FreeBSD Bug) */
res = ioctl(fd, SNDCTL_DSP_GETCAPS, &fmt);
if (res == 0 && (fmt & DSP_CAP_DUPLEX)) {
if (option_verbose > 1)
ast_verbose(VERBOSE_PREFIX_2 "Console is full duplex\n");
o->duplex = M_FULL;
};
break;
case O_WRONLY:
o->duplex = M_WRITE;
break;
case O_RDONLY:
o->duplex = M_READ;
break;
}
fmt = 1;
res = ioctl(fd, SNDCTL_DSP_STEREO, &fmt);
if (res < 0) {
ast_log(LOG_WARNING, "Failed to set audio device to mono\n");
return -1;
}
fmt = desired = 48000; /* 8000 Hz desired */
res = ioctl(fd, SNDCTL_DSP_SPEED, &fmt);
if (res < 0) {
ast_log(LOG_WARNING, "Failed to set audio device to mono\n");
return -1;
}
if (fmt != desired) {
if (!(o->warned & WARN_speed)) {
ast_log(LOG_WARNING,
"Requested %d Hz, got %d Hz -- sound may be choppy\n",
desired, fmt);
o->warned |= WARN_speed;
}
}
/*
* on Freebsd, SETFRAGMENT does not work very well on some cards.
* Default to use 256 bytes, let the user override
*/
if (o->frags) {
fmt = o->frags;
res = ioctl(fd, SNDCTL_DSP_SETFRAGMENT, &fmt);
if (res < 0) {
if (!(o->warned & WARN_frag)) {
ast_log(LOG_WARNING,
"Unable to set fragment size -- sound may be choppy\n");
o->warned |= WARN_frag;
}
}
}
/* on some cards, we need SNDCTL_DSP_SETTRIGGER to start outputting */
res = PCM_ENABLE_INPUT | PCM_ENABLE_OUTPUT;
res = ioctl(fd, SNDCTL_DSP_SETTRIGGER, &res);
/* it may fail if we are in half duplex, never mind */
return 0;
}
/*
* some of the standard methods supported by channels.
*/
static int usbradio_digit_begin(struct ast_channel *c, char digit)
{
return 0;
}
static int usbradio_digit_end(struct ast_channel *c, char digit, unsigned int duration)
{
/* no better use for received digits than print them */
ast_verbose(" << Console Received digit %c of duration %u ms >> \n",
digit, duration);
return 0;
}
static int usbradio_text(struct ast_channel *c, const char *text)
{
/* print received messages */
ast_verbose(" << Console Received text %s >> \n", text);
return 0;
}
/* Play ringtone 'x' on device 'o' */
static void ring(struct chan_usbradio_pvt *o, int x)
{
write(o->sndcmd[1], &x, sizeof(x));
}
/*
* handler for incoming calls. Either autoanswer, or start ringing
*/
static int usbradio_call(struct ast_channel *c, char *dest, int timeout)
{
struct chan_usbradio_pvt *o = c->tech_pvt;
time(&o->lasthidtime);
ast_pthread_create_background(&o->hidthread, NULL, hidthread, o);
ast_setstate(c, AST_STATE_UP);
return 0;
}
/*
* remote side answered the phone
*/
static int usbradio_answer(struct ast_channel *c)
{
struct chan_usbradio_pvt *o = c->tech_pvt;
ast_setstate(c, AST_STATE_UP);
o->cursound = -1;
o->nosound = 0;
return 0;
}
static int usbradio_hangup(struct ast_channel *c)
{
struct chan_usbradio_pvt *o = c->tech_pvt;
o->cursound = -1;
o->nosound = 0;
c->tech_pvt = NULL;
o->owner = NULL;
ast_module_unref(ast_module_info->self);
if (o->hookstate) {
if (o->autoanswer || o->autohangup) {
/* Assume auto-hangup too */
o->hookstate = 0;
setformat(o, O_CLOSE);
} else {
/* Make congestion noise */
ring(o, AST_CONTROL_CONGESTION);
}
}
o->stophid = 1;
pthread_join(o->hidthread,NULL);
return 0;
}
/* used for data coming from the network */
static int usbradio_write(struct ast_channel *c, struct ast_frame *f)
{
int src,datalen;
struct chan_usbradio_pvt *o = c->tech_pvt;
traceusb2(("usbradio_write() o->nosound= %i\n",o->nosound)); //sph maw asdf
/* Immediately return if no sound is enabled */
if (o->nosound)
return 0;
/* Stop any currently playing sound */
o->cursound = -1;
/*
* we could receive a block which is not a multiple of our
* FRAME_SIZE, so buffer it locally and write to the device
* in FRAME_SIZE chunks.
* Keep the residue stored for future use.
*/
if(o->txkeyed||o->txtestkey)o->pmrChan->txPttIn=1;
else o->pmrChan->txPttIn=0;
#if DEBUG_CAPTURES == 1 // to write input data to a file datalen=320
if (ftxcapraw && o->b.txcapraw)
{
i16 i, tbuff[f->datalen];
for(i=0;i<f->datalen;i+=2)
{
tbuff[i]= ((i16*)(f->data))[i/2];
tbuff[i+1]= o->txkeyed*M_Q13;
}
fwrite(tbuff,2,f->datalen,ftxcapraw);
//fwrite(f->data,1,f->datalen,ftxcapraw);
}
#endif
PmrTx(o->pmrChan,(i16*)f->data,(i16*)o->usbradio_write_buf_1);
#if 0 // to write 48KS/s stereo data to a file
if (!ftxoutraw) ftxoutraw = fopen(TX_CAP_OUT_FILE,"w");
if (ftxoutraw) fwrite(o->usbradio_write_buf_1,1,f->datalen * 2 * 6,ftxoutraw);
#endif
#if DEBUG_CAPTURES == 1
if (o->b.txcap2 && ftxcaptrace) fwrite((o->pmrChan->ptxDebug),1,FRAME_SIZE * 2 * 16,ftxcaptrace);
#endif
src = 0; /* read position into f->data */
datalen = f->datalen * 12;
while (src < datalen) {
/* Compute spare room in the buffer */
int l = sizeof(o->usbradio_write_buf) - o->usbradio_write_dst;
if (datalen - src >= l) { /* enough to fill a frame */
memcpy(o->usbradio_write_buf + o->usbradio_write_dst, o->usbradio_write_buf_1 + src, l);
soundcard_writeframe(o, (short *) o->usbradio_write_buf);
src += l;
o->usbradio_write_dst = 0;
} else { /* copy residue */
l = datalen - src;
memcpy(o->usbradio_write_buf + o->usbradio_write_dst, o->usbradio_write_buf_1 + src, l);
src += l; /* but really, we are done */
o->usbradio_write_dst += l;
}
}
return 0;
}
static struct ast_frame *usbradio_read(struct ast_channel *c)
{
int res;
struct chan_usbradio_pvt *o = c->tech_pvt;
struct ast_frame *f = &o->read_f,*f1;
struct ast_frame wf = { AST_FRAME_CONTROL };
time_t now;
traceusb2(("usbradio_read()\n")); //sph maw asdf
if (o->lasthidtime)
{
time(&now);
if ((now - o->lasthidtime) > 3)
{
ast_log(LOG_ERROR,"HID process has died or something!!\n");
return NULL;
}
}
if (o->lastrx && (!o->rxkeyed))
{
o->lastrx = 0;
wf.subclass = AST_CONTROL_RADIO_UNKEY;
ast_queue_frame(o->owner, &wf);
} else if ((!o->lastrx) && (o->rxkeyed))
{
o->lastrx = 1;
wf.subclass = AST_CONTROL_RADIO_KEY;
ast_queue_frame(o->owner, &wf);
}
/* XXX can be simplified returning &ast_null_frame */
/* prepare a NULL frame in case we don't have enough data to return */
bzero(f, sizeof(struct ast_frame));
f->frametype = AST_FRAME_NULL;
f->src = usbradio_tech.type;
res = read(o->sounddev, o->usbradio_read_buf + o->readpos,
sizeof(o->usbradio_read_buf) - o->readpos);
if (res < 0) /* audio data not ready, return a NULL frame */
return f;
o->readpos += res;
if (o->readpos < sizeof(o->usbradio_read_buf)) /* not enough samples */
return f;
if (o->mute)
return f;
#if DEBUG_CAPTURES == 1
if (o->b.rxcapraw && frxcapraw) fwrite((o->usbradio_read_buf + AST_FRIENDLY_OFFSET),1,FRAME_SIZE * 2 * 2 * 6,frxcapraw);
#endif
#if 1
PmrRx( o->pmrChan,
(i16 *)(o->usbradio_read_buf + AST_FRIENDLY_OFFSET),
(i16 *)(o->usbradio_read_buf_8k + AST_FRIENDLY_OFFSET));
#else
static FILE *hInput;
i16 iBuff[FRAME_SIZE*2*6];
o->pmrChan->b.rxCapture=1;
if(!hInput)
{
hInput = fopen("/usr/src/xpmr/testdata/rx_in.pcm","r");
if(!hInput)
{
printf(" Input Data File Not Found.\n");
return 0;
}
}
if(0==fread((void *)iBuff,2,FRAME_SIZE*2*6,hInput))exit;
PmrRx( o->pmrChan,
(i16 *)iBuff,
(i16 *)(o->usbradio_read_buf_8k + AST_FRIENDLY_OFFSET));
#endif
#if 0
if (!frxoutraw) frxoutraw = fopen(RX_CAP_OUT_FILE,"w");
if (frxoutraw) fwrite((o->usbradio_read_buf_8k + AST_FRIENDLY_OFFSET),1,FRAME_SIZE * 2,frxoutraw);
#endif
#if DEBUG_CAPTURES == 1
if (frxcaptrace && o->b.rxcap2) fwrite((o->pmrChan->prxDebug),1,FRAME_SIZE * 2 * 16,frxcaptrace);
#endif
if(o->rxcdtype==CD_HID && (o->pmrChan->rxExtCarrierDetect!=o->rxhidsq))
o->pmrChan->rxExtCarrierDetect=o->rxhidsq;
if(o->rxcdtype==CD_HID_INVERT && (o->pmrChan->rxExtCarrierDetect==o->rxhidsq))
o->pmrChan->rxExtCarrierDetect=!o->rxhidsq;
if( (o->rxcdtype==CD_HID && o->rxhidsq) ||
(o->rxcdtype==CD_HID_INVERT && !o->rxhidsq) ||
(o->rxcdtype==CD_XPMR_NOISE && o->pmrChan->rxCarrierDetect) ||
(o->rxcdtype==CD_XPMR_VOX && o->pmrChan->rxCarrierDetect)
)
{
res=1;
}
else res=0;
if(res!=o->rxcarrierdetect)
{
o->rxcarrierdetect=res;
if(o->debuglevel)printf("rxcarrierdetect = %i\n",res);
}
if(o->pmrChan->rxCtcss->decode!=o->rxctcssdecode)
{
if(o->debuglevel)printf("rxctcssdecode = %i\n",o->pmrChan->rxCtcss->decode);
o->rxctcssdecode=o->pmrChan->rxCtcss->decode;
}
if (
( o->rxctcssfreq && (o->rxctcssdecode == o->pmrChan->rxCtcssIndex)) ||
( !o->rxctcssfreq && o->rxcarrierdetect)
)
{
o->rxkeyed = 1;
}
else o->rxkeyed = 0;
o->readpos = AST_FRIENDLY_OFFSET; /* reset read pointer for next frame */
if (c->_state != AST_STATE_UP) /* drop data if frame is not up */
return f;
/* ok we can build and deliver the frame to the caller */
f->frametype = AST_FRAME_VOICE;
f->subclass = AST_FORMAT_SLINEAR;
f->samples = FRAME_SIZE;
f->datalen = FRAME_SIZE * 2;
f->data = o->usbradio_read_buf_8k + AST_FRIENDLY_OFFSET;
if (o->boost != BOOST_SCALE) { /* scale and clip values */
int i, x;
int16_t *p = (int16_t *) f->data;
for (i = 0; i < f->samples; i++) {
x = (p[i] * o->boost) / BOOST_SCALE;
if (x > 32767)
x = 32767;
else if (x < -32768)
x = -32768;
p[i] = x;
}
}
f->offset = AST_FRIENDLY_OFFSET;
if (o->dsp)
{
f1 = ast_dsp_process(c,o->dsp,f);
if ((f1->frametype == AST_FRAME_DTMF_END) ||
(f1->frametype == AST_FRAME_DTMF_BEGIN))
{
if ((f1->subclass == 'm') || (f1->subclass == 'u'))
f1->frametype = AST_FRAME_DTMF_BEGIN;
if (f1->frametype == AST_FRAME_DTMF_END)
ast_log(LOG_NOTICE,"Got DTMF char %c\n",f1->subclass);
return(f1);
}
}
return f;
}
static int usbradio_fixup(struct ast_channel *oldchan, struct ast_channel *newchan)
{
struct chan_usbradio_pvt *o = newchan->tech_pvt;
ast_log(LOG_WARNING,"usbradio_fixup()\n");
o->owner = newchan;
return 0;
}
static int usbradio_indicate(struct ast_channel *c, int cond, const void *data, size_t datalen)
{
struct chan_usbradio_pvt *o = c->tech_pvt;
int res = -1;
switch (cond) {
case AST_CONTROL_BUSY:
case AST_CONTROL_CONGESTION:
case AST_CONTROL_RINGING:
res = cond;
break;
case -1:
o->cursound = -1;
o->nosound = 0; /* when cursound is -1 nosound must be 0 */
return 0;
case AST_CONTROL_VIDUPDATE:
res = -1;
break;
case AST_CONTROL_HOLD:
ast_verbose(" << Console Has Been Placed on Hold >> \n");
ast_moh_start(c, data, o->mohinterpret);
break;
case AST_CONTROL_UNHOLD:
ast_verbose(" << Console Has Been Retrieved from Hold >> \n");
ast_moh_stop(c);
break;
case AST_CONTROL_PROCEEDING:
ast_verbose(" << Call Proceeding... >> \n");
ast_moh_stop(c);
break;
case AST_CONTROL_PROGRESS:
ast_verbose(" << Call Progress... >> \n");
ast_moh_stop(c);
break;
case AST_CONTROL_RADIO_KEY:
o->txkeyed = 1;
if(o->debuglevel)ast_verbose(" << Radio Transmit On. >> \n");
break;
case AST_CONTROL_RADIO_UNKEY:
o->txkeyed = 0;
if(o->debuglevel)ast_verbose(" << Radio Transmit Off. >> \n");
break;
default:
ast_log(LOG_WARNING, "Don't know how to display condition %d on %s\n", cond, c->name);
return -1;
}
if (res > -1)
ring(o, res);
return 0;
}
/*
* allocate a new channel.
*/
static struct ast_channel *usbradio_new(struct chan_usbradio_pvt *o, char *ext, char *ctx, int state)
{
struct ast_channel *c;
char device[100];
strcpy(device,"dsp");
if (o->devicenum) sprintf(device,"dsp%d",o->devicenum);
c = ast_channel_alloc(1, state, o->cid_num, o->cid_name, "", ext, ctx, 0, "usbRadio/%s", device);
if (c == NULL)
return NULL;
c->tech = &usbradio_tech;
if (o->sounddev < 0)
setformat(o, O_RDWR);
c->fds[0] = o->sounddev; /* -1 if device closed, override later */
c->nativeformats = AST_FORMAT_SLINEAR;
c->readformat = AST_FORMAT_SLINEAR;
c->writeformat = AST_FORMAT_SLINEAR;
c->tech_pvt = o;
if (!ast_strlen_zero(o->language))
ast_string_field_set(c, language, o->language);
/* Don't use ast_set_callerid() here because it will
* generate a needless NewCallerID event */
c->cid.cid_num = ast_strdup(o->cid_num);
c->cid.cid_ani = ast_strdup(o->cid_num);
c->cid.cid_name = ast_strdup(o->cid_name);
if (!ast_strlen_zero(ext))
c->cid.cid_dnid = ast_strdup(ext);
o->owner = c;
ast_module_ref(ast_module_info->self);
ast_jb_configure(c, &global_jbconf);
if (state != AST_STATE_DOWN) {
if (ast_pbx_start(c)) {
ast_log(LOG_WARNING, "Unable to start PBX on %s\n", c->name);
ast_hangup(c);
o->owner = c = NULL;
/* XXX what about the channel itself ? */
/* XXX what about usecnt ? */
}
}
return c;
}
static struct ast_channel *usbradio_request(const char *type, int format, void *data, int *cause)
{
struct ast_channel *c;
struct chan_usbradio_pvt *o = find_desc(data);
if (0)
{
ast_log(LOG_WARNING, "usbradio_request ty <%s> data 0x%p <%s>\n", type, data, (char *) data);
}
if (o == NULL) {
ast_log(LOG_NOTICE, "Device %s not found\n", (char *) data);
/* XXX we could default to 'dsp' perhaps ? */
return NULL;
}
if ((format & AST_FORMAT_SLINEAR) == 0) {
ast_log(LOG_NOTICE, "Format 0x%x unsupported\n", format);
return NULL;
}
if (o->owner) {
ast_log(LOG_NOTICE, "Already have a call (chan %p) on the usb channel\n", o->owner);
*cause = AST_CAUSE_BUSY;
return NULL;
}
c = usbradio_new(o, NULL, NULL, AST_STATE_DOWN);
if (c == NULL) {
ast_log(LOG_WARNING, "Unable to create new usb channel\n");
return NULL;
}
return c;
}
static char *handle_cli_radio_key(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
struct chan_usbradio_pvt *o = NULL;
switch (cmd) {
case CLI_INIT:
e->command = "radio key";
e->usage =
"Usage: radio key\n"
" Simulates COR active.\n";
return NULL;
case CLI_GENERATE:
return NULL;
}
if (a->argc != 2)
return CLI_SHOWUSAGE;
o = find_desc(usbradio_active);
o->txtestkey = 1;
return CLI_SUCCESS;
}
static char *handle_cli_radio_unkey(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
struct chan_usbradio_pvt *o = NULL;
switch (cmd) {
case CLI_INIT:
e->command = "radio unkey";
e->usage =
"Usage: radio unkey\n"
" Simulates COR un-active.\n";
return NULL;
case CLI_GENERATE:
return NULL;
}
if (a->argc != 2)
return CLI_SHOWUSAGE;
o = find_desc(usbradio_active);
o->txtestkey = 0;
return CLI_SUCCESS;
}
static char *handle_cli_radio_tune(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
struct chan_usbradio_pvt *o = NULL;
int i = 0;
switch (cmd) {
case CLI_INIT:
e->command = "radio tune [rxnoise|rxvoice|rxtone|rxsquelch|rxcap|rxtracecap|"
"txvoice|txtone|txcap|txtracecap|auxvoice|nocap|dump|save]";
/* radio tune 6 3000 measured tx value */
e->usage =
"Usage: radio tune <function>\n"
" rxnoise\n"
" rxvoice\n"
" rxtone\n"
" rxsquelch [newsetting]\n"
" rxcap\n"
" rxtracecap\n"
" txvoice [newsetting]\n"
" txtone [newsetting]\n"
" txcap\n"
" txtracecap\n"
" auxvoice [newsetting]\n"
" nocap\n"
" dump\n"
" save (settings to tuning file)\n"
"\n"
" All [newsetting]s are values 0-999\n";
return NULL;
case CLI_GENERATE:
return NULL;
}
if ((a->argc < 2) || (a->argc > 4))
return CLI_SHOWUSAGE;
if (a->argc == 2) /* just show stuff */
{
ast_cli(a->fd,"Output A is currently set to ");
if(o->txmixa==TX_OUT_COMPOSITE)ast_cli(a->fd,"composite.\n");
else if (o->txmixa==TX_OUT_VOICE)ast_cli(a->fd,"voice.\n");
else if (o->txmixa==TX_OUT_LSD)ast_cli(a->fd,"tone.\n");
else if (o->txmixa==TX_OUT_AUX)ast_cli(a->fd,"auxvoice.\n");
else ast_cli(a->fd,"off.\n");
ast_cli(a->fd,"Output B is currently set to ");
if(o->txmixb==TX_OUT_COMPOSITE)ast_cli(a->fd,"composite.\n");
else if (o->txmixb==TX_OUT_VOICE)ast_cli(a->fd,"voice.\n");
else if (o->txmixb==TX_OUT_LSD)ast_cli(a->fd,"tone.\n");
else if (o->txmixb==TX_OUT_AUX)ast_cli(a->fd,"auxvoice.\n");
else ast_cli(a->fd,"off.\n");
ast_cli(a->fd,"Tx Voice Level currently set to %d\n",o->txmixaset);
ast_cli(a->fd,"Tx Tone Level currently set to %d\n",o->txctcssadj);
ast_cli(a->fd,"Rx Squelch currently set to %d\n",o->rxsquelchadj);
return CLI_SHOWUSAGE;
}
o = find_desc(usbradio_active);
if (!strcasecmp(a->argv[2],"rxnoise")) tune_rxinput(o);
else if (!strcasecmp(a->argv[2],"rxvoice")) tune_rxvoice(o);
else if (!strcasecmp(a->argv[2],"rxtone")) tune_rxctcss(o);
else if (!strcasecmp(a->argv[2],"rxsquelch"))
{
if (a->argc == 3)
{
ast_cli(a->fd,"Current Signal Strength is %d\n",((32767-o->pmrChan->rxRssi)*1000/32767));
ast_cli(a->fd,"Current Squelch setting is %d\n",o->rxsquelchadj);
//ast_cli(a->fd,"Current Raw RSSI is %d\n",o->pmrChan->rxRssi);
//ast_cli(a->fd,"Current (real) Squelch setting is %d\n",*(o->pmrChan->prxSquelchAdjust));
} else {
i = atoi(a->argv[3]);
if ((i < 0) || (i > 999)) return CLI_SHOWUSAGE;
ast_cli(a->fd,"Changed Squelch setting to %d\n",i);
o->rxsquelchadj = i;
*(o->pmrChan->prxSquelchAdjust)= ((999 - i) * 32767) / 1000;
}
}
else if (!strcasecmp(a->argv[2],"txvoice")) {
i = 0;
if( (o->txmixa!=TX_OUT_VOICE) && (o->txmixb!=TX_OUT_VOICE) &&
(o->txmixa!=TX_OUT_COMPOSITE) && (o->txmixb!=TX_OUT_COMPOSITE)
)
{
ast_log(LOG_ERROR,"No txvoice output configured.\n");
}
else if (a->argc == 3)
{
if((o->txmixa==TX_OUT_VOICE)||(o->txmixa==TX_OUT_COMPOSITE))
ast_cli(a->fd,"Current txvoice setting on Channel A is %d\n",o->txmixaset);
else
ast_cli(a->fd,"Current txvoice setting on Channel B is %d\n",o->txmixbset);
}
else
{
i = atoi(a->argv[3]);
if ((i < 0) || (i > 999)) return CLI_SHOWUSAGE;
if((o->txmixa==TX_OUT_VOICE)||(o->txmixa==TX_OUT_COMPOSITE))
{
o->txmixaset=i;
ast_cli(a->fd,"Changed txvoice setting on Channel A to %d\n",o->txmixaset);
}
else
{
o->txmixbset=i;
ast_cli(a->fd,"Changed txvoice setting on Channel B to %d\n",o->txmixbset);
}
mixer_write(o);
mult_set(o);
ast_cli(a->fd,"Changed Tx Voice Output setting to %d\n",i);
}
tune_txoutput(o,i);
}
else if (!strcasecmp(a->argv[2],"auxvoice")) {
i = 0;
if( (o->txmixa!=TX_OUT_AUX) && (o->txmixb!=TX_OUT_AUX))
{
ast_log(LOG_WARNING,"No auxvoice output configured.\n");
}
else if (a->argc == 3)
{
if(o->txmixa==TX_OUT_AUX)
ast_cli(a->fd,"Current auxvoice setting on Channel A is %d\n",o->txmixaset);
else
ast_cli(a->fd,"Current auxvoice setting on Channel B is %d\n",o->txmixbset);
}
else
{
i = atoi(a->argv[3]);
if ((i < 0) || (i > 999)) return CLI_SHOWUSAGE;
if(o->txmixa==TX_OUT_AUX)
{
o->txmixbset=i;
ast_cli(a->fd,"Changed auxvoice setting on Channel A to %d\n",o->txmixaset);
}
else
{
o->txmixbset=i;
ast_cli(a->fd,"Changed auxvoice setting on Channel B to %d\n",o->txmixbset);
}
mixer_write(o);
mult_set(o);
}
//tune_auxoutput(o,i);
}
else if (!strcasecmp(a->argv[2],"txtone"))
{
if (a->argc == 3)
ast_cli(a->fd,"Current Tx CTCSS modulation setting = %d\n",o->txctcssadj);
else
{
i = atoi(a->argv[3]);
if ((i < 0) || (i > 999)) return CLI_SHOWUSAGE;
o->txctcssadj = i;
set_txctcss_level(o);
ast_cli(a->fd,"Changed Tx CTCSS modulation setting to %i\n",i);
}
o->txtestkey=1;
usleep(5000000);
o->txtestkey=0;
}
else if (!strcasecmp(a->argv[2],"dump")) pmrdump(o);
else if (!strcasecmp(a->argv[2],"nocap"))
{
ast_cli(a->fd,"File capture (trace) was rx=%d tx=%d and now off.\n",o->b.rxcap2,o->b.txcap2);
ast_cli(a->fd,"File capture (raw) was rx=%d tx=%d and now off.\n",o->b.rxcapraw,o->b.txcapraw);
o->b.rxcapraw=o->b.txcapraw=o->b.rxcap2=o->b.txcap2=o->pmrChan->b.rxCapture=o->pmrChan->b.txCapture=0;
if (frxcapraw) { fclose(frxcapraw); frxcapraw = NULL; }
if (frxcaptrace) { fclose(frxcaptrace); frxcaptrace = NULL; }
if (frxoutraw) { fclose(frxoutraw); frxoutraw = NULL; }
if (ftxcapraw) { fclose(ftxcapraw); ftxcapraw = NULL; }
if (ftxcaptrace) { fclose(ftxcaptrace); ftxcaptrace = NULL; }
if (ftxoutraw) { fclose(ftxoutraw); ftxoutraw = NULL; }
}
else if (!strcasecmp(a->argv[2],"rxtracecap"))
{
if (!frxcaptrace) frxcaptrace= fopen(RX_CAP_TRACE_FILE,"w");
ast_cli(a->fd,"Trace rx on.\n");
o->b.rxcap2=o->pmrChan->b.rxCapture=1;
}
else if (!strcasecmp(a->argv[2],"txtracecap"))
{
if (!ftxcaptrace) ftxcaptrace= fopen(TX_CAP_TRACE_FILE,"w");
ast_cli(a->fd,"Trace tx on.\n");
o->b.txcap2=o->pmrChan->b.txCapture=1;
}
else if (!strcasecmp(a->argv[2],"rxcap"))
{
if (!frxcapraw) frxcapraw = fopen(RX_CAP_RAW_FILE,"w");
ast_cli(a->fd,"cap rx raw on.\n");
o->b.rxcapraw=1;
}
else if (!strcasecmp(a->argv[2],"txcap"))
{
if (!ftxcapraw) ftxcapraw = fopen(TX_CAP_RAW_FILE,"w");
ast_cli(a->fd,"cap tx raw on.\n");
o->b.txcapraw=1;
}
else if (!strcasecmp(a->argv[2],"save"))
{
tune_write(o);
ast_cli(a->fd,"Saved radio tuning settings to usbradio_tune.conf\n");
}
else return CLI_SHOWUSAGE;
return CLI_SUCCESS;
}
/*
set transmit ctcss modulation level
adjust mixer output or internal gain depending on output type
setting range is 0.0 to 0.9
*/
static int set_txctcss_level(struct chan_usbradio_pvt *o)
{
if (o->txmixa == TX_OUT_LSD)
{
o->txmixaset=(151*o->txctcssadj) / 1000;
mixer_write(o);
mult_set(o);
}
else if (o->txmixb == TX_OUT_LSD)
{
o->txmixbset=(151*o->txctcssadj) / 1000;
mixer_write(o);
mult_set(o);
}
else
{
*o->pmrChan->ptxCtcssAdjust=(o->txctcssadj * M_Q8) / 1000;
}
return 0;
}
/*
CLI debugging on and off
*/
static char *handle_cli_radio_set_debug(struct ast_cli_entry *e, int cmd, struct ast_cli_args *a)
{
struct chan_usbradio_pvt *o = NULL;
switch (cmd) {
case CLI_INIT:
e->command = "radio set debug [off]";
e->usage =
"Usage: radio set debug [off]\n"
" Enable/Disable radio debugging.\n";
case CLI_GENERATE:
return NULL;
}
if (a->argc < 3 || a->argc > 4)
return CLI_SHOWUSAGE;
if (a->argc == 4 && strncasecmp(a->argv[3], "off", 3))
return CLI_SHOWUSAGE;
o = find_desc(usbradio_active);
if (a->argc == 3)
o->debuglevel = 1;
else
o->debuglevel = 0;
ast_cli(a->fd, "USB Radio debugging %s.\n", o->debuglevel ? "enabled" : "disabled");
return CLI_SUCCESS;
}
static struct ast_cli_entry cli_usbradio[] = {
AST_CLI_DEFINE(handle_cli_radio_key, "Simulate Rx Signal Present"),
AST_CLI_DEFINE(handle_cli_radio_unkey, "Simulate Rx Signal Lusb"),
AST_CLI_DEFINE(handle_cli_radio_tune, "Radio Tune"),
AST_CLI_DEFINE(handle_cli_radio_set_debug, "Enable/Disable Radio Debugging"),
};
/*
* store the callerid components
*/
#if 0
static void store_callerid(struct chan_usbradio_pvt *o, char *s)
{
ast_callerid_split(s, o->cid_name, sizeof(o->cid_name), o->cid_num, sizeof(o->cid_num));
}
#endif
static void store_rxdemod(struct chan_usbradio_pvt *o, char *s)
{
if (!strcasecmp(s,"no")){
o->rxdemod = RX_AUDIO_NONE;
}
else if (!strcasecmp(s,"speaker")){
o->rxdemod = RX_AUDIO_SPEAKER;
}
else if (!strcasecmp(s,"flat")){
o->rxdemod = RX_AUDIO_FLAT;
}
else {
ast_log(LOG_WARNING,"Unrecognized rxdemod parameter: %s\n",s);
}
//ast_log(LOG_WARNING, "set rxdemod = %s\n", s);
}
static void store_txmixa(struct chan_usbradio_pvt *o, char *s)
{
if (!strcasecmp(s,"no")){
o->txmixa = TX_OUT_OFF;
}
else if (!strcasecmp(s,"voice")){
o->txmixa = TX_OUT_VOICE;
}
else if (!strcasecmp(s,"tone")){
o->txmixa = TX_OUT_LSD;
}
else if (!strcasecmp(s,"composite")){
o->txmixa = TX_OUT_COMPOSITE;
}
else if (!strcasecmp(s,"auxvoice")){
o->txmixb = TX_OUT_AUX;
}
else {
ast_log(LOG_WARNING,"Unrecognized txmixa parameter: %s\n",s);
}
//ast_log(LOG_WARNING, "set txmixa = %s\n", s);
}
static void store_txmixb(struct chan_usbradio_pvt *o, char *s)
{
if (!strcasecmp(s,"no")){
o->txmixb = TX_OUT_OFF;
}
else if (!strcasecmp(s,"voice")){
o->txmixb = TX_OUT_VOICE;
}
else if (!strcasecmp(s,"tone")){
o->txmixb = TX_OUT_LSD;
}
else if (!strcasecmp(s,"composite")){
o->txmixb = TX_OUT_COMPOSITE;
}
else if (!strcasecmp(s,"auxvoice")){
o->txmixb = TX_OUT_AUX;
}
else {
ast_log(LOG_WARNING,"Unrecognized txmixb parameter: %s\n",s);
}
//ast_log(LOG_WARNING, "set txmixb = %s\n", s);
}
/*
*/
static void store_rxcdtype(struct chan_usbradio_pvt *o, char *s)
{
if (!strcasecmp(s,"no")){
o->rxcdtype = CD_IGNORE;
}
else if (!strcasecmp(s,"usb")){
o->rxcdtype = CD_HID;
}
else if (!strcasecmp(s,"dsp")){
o->rxcdtype = CD_XPMR_NOISE;
}
else if (!strcasecmp(s,"vox")){
o->rxcdtype = CD_XPMR_VOX;
}
else if (!strcasecmp(s,"usbinvert")){
o->rxcdtype = CD_HID_INVERT;
}
else {
ast_log(LOG_WARNING,"Unrecognized rxcdtype parameter: %s\n",s);
}
//ast_log(LOG_WARNING, "set rxcdtype = %s\n", s);
}
/*
*/
static void store_rxsdtype(struct chan_usbradio_pvt *o, char *s)
{
if (!strcasecmp(s,"no") || !strcasecmp(s,"SD_IGNORE")){
o->rxsdtype = SD_IGNORE;
}
else if (!strcasecmp(s,"usb") || !strcasecmp(s,"SD_HID")){
o->rxsdtype = SD_HID;
}
else if (!strcasecmp(s,"usbinvert") || !strcasecmp(s,"SD_HID_INVERT")){
o->rxsdtype = SD_HID_INVERT;
}
else if (!strcasecmp(s,"software") || !strcasecmp(s,"SD_XPMR")){
o->rxsdtype = SD_XPMR;
}
else {
ast_log(LOG_WARNING,"Unrecognized rxsdtype parameter: %s\n",s);
}
//ast_log(LOG_WARNING, "set rxsdtype = %s\n", s);
}
/*
*/
static void store_rxgain(struct chan_usbradio_pvt *o, char *s)
{
float f;
sscanf(s,"%f",&f);
o->rxgain = f;
//ast_log(LOG_WARNING, "set rxgain = %f\n", f);
}
/*
*/
static void store_rxvoiceadj(struct chan_usbradio_pvt *o, char *s)
{
float f;
sscanf(s,"%f",&f);
o->rxvoiceadj = f;
//ast_log(LOG_WARNING, "set rxvoiceadj = %f\n", f);
}
/*
*/
static void store_rxctcssadj(struct chan_usbradio_pvt *o, char *s)
{
float f;
sscanf(s,"%f",&f);
o->rxctcssadj = f;
//ast_log(LOG_WARNING, "set rxctcssadj = %f\n", f);
}
/*
*/
static void store_txtoctype(struct chan_usbradio_pvt *o, char *s)
{
if (!strcasecmp(s,"no") || !strcasecmp(s,"TOC_NONE")){
o->txtoctype = TOC_NONE;
}
else if (!strcasecmp(s,"phase") || !strcasecmp(s,"TOC_PHASE")){
o->txtoctype = TOC_PHASE;
}
else if (!strcasecmp(s,"notone") || !strcasecmp(s,"TOC_NOTONE")){
o->txtoctype = TOC_NOTONE;
}
else {
ast_log(LOG_WARNING,"Unrecognized txtoctype parameter: %s\n",s);
}
//ast_log(LOG_WARNING, "set txtoctype = %s\n", s);
}
/*
*/
static void store_rxctcssfreq(struct chan_usbradio_pvt *o, char *s)
{
float f;
sscanf(s,"%f",&f);
o->rxctcssfreq = f;
//ast_log(LOG_WARNING, "set rxctcss = %f\n", f);
}
/*
*/
static void store_txctcssfreq(struct chan_usbradio_pvt *o, char *s)
{
float f;
sscanf(s,"%f",&f);
o->txctcssfreq = f;
//ast_log(LOG_WARNING, "set txctcss = %f\n", f);
}
/*
*/
static void tune_txoutput(struct chan_usbradio_pvt *o, int value)
{
o->txtestkey=1;
o->pmrChan->txPttIn=1;
// generate 1KHz tone at 7200 peak
//o->pmrChan->spsSigGen1->freq=10000;
//o->pmrChan->spsSigGen1->outputGain=(float)(0.22*M_Q8);
//o->pmrChan->b.startSpecialTone=1;
TxTestTone(o->pmrChan, 1);
usleep(5000000);
//o->pmrChan->b.stopSpecialTone=1;
usleep(100000);
TxTestTone(o->pmrChan, 0);
o->pmrChan->txPttIn=0;
o->txtestkey=0;
}
/*
*/
static void tune_rxinput(struct chan_usbradio_pvt *o)
{
const int target=23000;
const int tolerance=2000;
const int settingmin=1;
const int settingstart=2;
const int maxtries=12;
float settingmax;
int setting=0, tries=0, tmpdiscfactor, meas;
int tunetype=0;
settingmax = o->micmax;
if(o->pmrChan->rxDemod)tunetype=1;
setting = settingstart;
while(tries<maxtries)
{
setamixer(o->devicenum,MIXER_PARAM_MIC_CAPTURE_VOL,setting,0);
setamixer(o->devicenum,MIXER_PARAM_MIC_BOOST,o->rxboostset,0);
usleep(100000);
if(o->rxcdtype==CD_XPMR_VOX || o->rxdemod==RX_AUDIO_SPEAKER)
{
// printf("Measure Direct Input\n");
o->pmrChan->spsMeasure->source = o->pmrChan->spsRx->source;
o->pmrChan->spsMeasure->discfactor=1000;
o->pmrChan->spsMeasure->enabled=1;
o->pmrChan->spsMeasure->amax = o->pmrChan->spsMeasure->amin = 0;
usleep(400000);
meas=o->pmrChan->spsMeasure->apeak;
o->pmrChan->spsMeasure->enabled=0;
}
else
{
// printf("Measure HF Noise\n");
tmpdiscfactor=o->pmrChan->spsRx->discfactor;
o->pmrChan->spsRx->discfactor=(i16)1000;
o->pmrChan->spsRx->discounteru=o->pmrChan->spsRx->discounterl=0;
o->pmrChan->spsRx->amax=o->pmrChan->spsRx->amin=0;
usleep(200000);
meas=o->pmrChan->rxRssi;
o->pmrChan->spsRx->discfactor=tmpdiscfactor;
o->pmrChan->spsRx->discounteru=o->pmrChan->spsRx->discounterl=0;
o->pmrChan->spsRx->amax=o->pmrChan->spsRx->amin=0;
}
if(!meas)meas++;
printf("tries=%d, setting=%d, meas=%i\n",tries,setting,meas);
if( meas<(target-tolerance) || meas>(target+tolerance) || tries<3){
setting=setting*target/meas;
}
else if(tries>4 && meas>(target-tolerance) && meas<(target+tolerance) )
{
break;
}
if(setting<settingmin)setting=settingmin;
else if(setting>settingmax)setting=settingmax;
tries++;
}
printf("DONE tries=%d, setting=%d, meas=%i\n",tries,
(setting * 1000) / o->micmax,meas);
if( meas<(target-tolerance) || meas>(target+tolerance) ){
printf("ERROR: RX INPUT ADJUST FAILED.\n");
}else{
printf("INFO: RX INPUT ADJUST SUCCESS.\n");
o->rxmixerset=(setting * 1000) / o->micmax;
}
}
/*
*/
static void tune_rxvoice(struct chan_usbradio_pvt *o)
{
const int target=7200; // peak
const int tolerance=360; // peak to peak
const float settingmin=0.1;
const float settingmax=4;
const float settingstart=1;
const int maxtries=12;
float setting;
int tries=0, meas;
printf("INFO: RX VOICE ADJUST START.\n");
printf("target=%i tolerance=%i \n",target,tolerance);
if(!o->pmrChan->spsMeasure)
printf("ERROR: NO MEASURE BLOCK.\n");
if(!o->pmrChan->spsMeasure->source || !o->pmrChan->prxVoiceAdjust )
printf("ERROR: NO SOURCE OR MEASURE SETTING.\n");
o->pmrChan->spsMeasure->source=o->pmrChan->spsRxOut->sink;
o->pmrChan->spsMeasure->enabled=1;
o->pmrChan->spsMeasure->discfactor=1000;
setting=settingstart;
// printf("ERROR: NO MEASURE BLOCK.\n");
while(tries<maxtries)
{
*(o->pmrChan->prxVoiceAdjust)=setting*M_Q8;
usleep(10000);
o->pmrChan->spsMeasure->amax = o->pmrChan->spsMeasure->amin = 0;
usleep(1000000);
meas = o->pmrChan->spsMeasure->apeak;
printf("tries=%d, setting=%f, meas=%i\n",tries,setting,meas);
if( meas<(target-tolerance) || meas>(target+tolerance) || tries<3){
setting=setting*target/meas;
}
else if(tries>4 && meas>(target-tolerance) && meas<(target+tolerance) )
{
break;
}
if(setting<settingmin)setting=settingmin;
else if(setting>settingmax)setting=settingmax;
tries++;
}
o->pmrChan->spsMeasure->enabled=0;
printf("DONE tries=%d, setting=%f, meas=%f\n",tries,setting,(float)meas);
if( meas<(target-tolerance) || meas>(target+tolerance) ){
printf("ERROR: RX VOICE GAIN ADJUST FAILED.\n");
}else{
printf("INFO: RX VOICE GAIN ADJUST SUCCESS.\n");
o->rxvoiceadj=setting;
}
}
/*
*/
static void tune_rxctcss(struct chan_usbradio_pvt *o)
{
const int target=4096;
const int tolerance=100;
const float settingmin=0.1;
const float settingmax=4;
const float settingstart=1;
const int maxtries=12;
float setting;
int tries=0, meas;
printf("INFO: RX CTCSS ADJUST START.\n");
printf("target=%i tolerance=%i \n",target,tolerance);
o->pmrChan->spsMeasure->source=o->pmrChan->prxCtcssMeasure;
o->pmrChan->spsMeasure->discfactor=400;
o->pmrChan->spsMeasure->enabled=1;
setting=settingstart;
while(tries<maxtries)
{
*(o->pmrChan->prxCtcssAdjust)=setting*M_Q8;
usleep(10000);
o->pmrChan->spsMeasure->amax = o->pmrChan->spsMeasure->amin = 0;
usleep(500000);
meas = o->pmrChan->spsMeasure->apeak;
printf("tries=%d, setting=%f, meas=%i\n",tries,setting,meas);
if( meas<(target-tolerance) || meas>(target+tolerance) || tries<3){
setting=setting*target/meas;
}
else if(tries>4 && meas>(target-tolerance) && meas<(target+tolerance) )
{
break;
}
if(setting<settingmin)setting=settingmin;
else if(setting>settingmax)setting=settingmax;
tries++;
}
o->pmrChan->spsMeasure->enabled=0;
printf("DONE tries=%d, setting=%f, meas=%f\n",tries,setting,(float)meas);
if( meas<(target-tolerance) || meas>(target+tolerance) ){
printf("ERROR: RX CTCSS GAIN ADJUST FAILED.\n");
}else{
printf("INFO: RX CTCSS GAIN ADJUST SUCCESS.\n");
o->rxctcssadj=setting;
}
}
/*
this file then is included in chan_usbradio.conf
#include /etc/asterisk/usbradio_tune.conf
*/
static void tune_write(struct chan_usbradio_pvt *o)
{
FILE *fp;
fp=fopen("/etc/asterisk/usbradio_tune.conf","w");
if (!strcmp(o->name,"dsp"))
fprintf(fp,"[general]\n");
else
fprintf(fp,"[%s]\n",o->name);
fprintf(fp,"; name=%s\n",o->name);
fprintf(fp,"; devicenum=%i\n",o->devicenum);
fprintf(fp,"rxmixerset=%i\n",o->rxmixerset);
fprintf(fp,"rxboostset=%i\n",o->rxboostset);
fprintf(fp,"txmixaset=%i\n",o->txmixaset);
fprintf(fp,"txmixbset=%i\n",o->txmixbset);
fprintf(fp,"rxvoiceadj=%f\n",o->rxvoiceadj);
fprintf(fp,"rxctcssadj=%f\n",o->rxctcssadj);
fprintf(fp,"txctcssadj=%i\n",o->txctcssadj);
fprintf(fp,"rxsquelchadj=%i\n",o->rxsquelchadj);
fclose(fp);
}
//
static void mixer_write(struct chan_usbradio_pvt *o)
{
setamixer(o->devicenum,MIXER_PARAM_MIC_PLAYBACK_SW,0,0);
setamixer(o->devicenum,MIXER_PARAM_MIC_PLAYBACK_VOL,0,0);
setamixer(o->devicenum,MIXER_PARAM_SPKR_PLAYBACK_SW,1,0);
setamixer(o->devicenum,MIXER_PARAM_SPKR_PLAYBACK_VOL,
o->txmixaset * o->spkrmax / 1000,
o->txmixbset * o->spkrmax / 1000);
setamixer(o->devicenum,MIXER_PARAM_MIC_CAPTURE_VOL,
o->rxmixerset * o->micmax / 1000,0);
setamixer(o->devicenum,MIXER_PARAM_MIC_BOOST,o->rxboostset,0);
setamixer(o->devicenum,MIXER_PARAM_MIC_CAPTURE_SW,1,0);
}
/*
adjust dsp multiplier to add resolution to tx level adjustment
*/
static void mult_set(struct chan_usbradio_pvt *o)
{
if(o->pmrChan->spsTxOutA) {
o->pmrChan->spsTxOutA->outputGain =
mult_calc((o->txmixaset * 152) / 1000);
}
if(o->pmrChan->spsTxOutB){
o->pmrChan->spsTxOutB->outputGain =
mult_calc((o->txmixbset * 152) / 1000);
}
}
//
// input 0 - 151 outputs are pot and multiplier
//
static int mult_calc(int value)
{
const int multx=M_Q8;
int pot,mult;
pot=((int)(value/4)*4)+2;
mult = multx-( ( multx * (3-(value%4)) ) / (pot+2) );
return(mult);
}
#define pd(x) {printf(#x" = %d\n",x);}
#define pp(x) {printf(#x" = %p\n",x);}
#define ps(x) {printf(#x" = %s\n",x);}
#define pf(x) {printf(#x" = %f\n",x);}
/*
*/
static void pmrdump(struct chan_usbradio_pvt *o)
{
t_pmr_chan *p;
p=o->pmrChan;
printf("\nodump()\n");
pd(o->devicenum);
pd(o->rxdemod);
pd(o->rxcdtype);
pd(o->rxsdtype);
pd(o->txtoctype);
pd(o->rxmixerset);
pf(o->rxvoiceadj);
pf(o->rxctcssadj);
pd(o->rxsquelchadj);
pd(o->txprelim);
pd(o->txmixa);
pd(o->txmixb);
pd(o->txmixaset);
pd(o->txmixbset);
printf("\npmrdump()\n");
printf("prxSquelchAdjust=%i\n",*(o->pmrChan->prxSquelchAdjust));
pd(p->rxCarrierPoint);
pd(p->rxCarrierHyst);
pd(p->rxCtcss->relax);
pf(p->rxCtcssFreq);
pd(p->rxCtcssIndex);
pf(p->txCtcssFreq);
pd(p->txMixA);
pd(p->txMixB);
pd(p->rxDeEmpEnable);
pd(p->rxCenterSlicerEnable);
pd(p->rxCtcssDecodeEnable);
pd(p->rxDcsDecodeEnable);
pd(p->txHpfEnable);
pd(p->txLimiterEnable);
pd(p->txPreEmpEnable);
pd(p->txLpfEnable);
if(p->spsTxOutA)pd(p->spsTxOutA->outputGain);
if(p->spsTxOutB)pd(p->spsTxOutB->outputGain);
return;
}
/*
* grab fields from the config file, init the descriptor and open the device.
*/
static struct chan_usbradio_pvt *store_config(struct ast_config *cfg, char *ctg)
{
struct ast_variable *v;
struct chan_usbradio_pvt *o;
struct ast_config *cfg1;
struct ast_flags config_flags = { 0 };
if (ctg == NULL) {
traceusb1((" store_config() ctg == NULL\n"));
o = &usbradio_default;
ctg = "general";
} else {
if (!(o = ast_calloc(1, sizeof(*o)))){
return NULL;
}
*o = usbradio_default;
/* "general" is also the default thing */
if (strcmp(ctg, "general") == 0) {
o->name = ast_strdup("dsp");
usbradio_active = o->name;
}
else o->name = ast_strdup(ctg);
}
strcpy(o->mohinterpret, "default");
o->micmax = amixer_max(o->devicenum,MIXER_PARAM_MIC_CAPTURE_VOL);
o->spkrmax = amixer_max(o->devicenum,MIXER_PARAM_SPKR_PLAYBACK_VOL);
/* fill other fields from configuration */
for (v = ast_variable_browse(cfg, ctg); v; v = v->next) {
M_START(v->name, v->value);
/* handle jb conf */
if (!ast_jb_read_conf(&global_jbconf, v->name, v->value))
continue;
#if 0
M_BOOL("autoanswer", o->autoanswer)
M_BOOL("autohangup", o->autohangup)
M_BOOL("overridecontext", o->overridecontext)
M_STR("context", o->ctx)
M_STR("language", o->language)
M_STR("mohinterpret", o->mohinterpret)
M_STR("extension", o->ext)
M_F("callerid", store_callerid(o, v->value))
#endif
M_UINT("frags", o->frags)
M_UINT("queuesize", o->queuesize)
M_UINT("devicenum", o->devicenum)
M_UINT("debug", usbradio_debug)
M_BOOL("rxcpusaver",o->rxcpusaver)
M_BOOL("txcpusaver",o->txcpusaver)
M_BOOL("invertptt",o->invertptt)
M_F("rxdemod",store_rxdemod(o,v->value))
M_BOOL("txprelim",o->txprelim);
M_F("txmixa",store_txmixa(o,v->value))
M_F("txmixb",store_txmixb(o,v->value))
M_F("carrierfrom",store_rxcdtype(o,v->value))
M_F("rxsdtype",store_rxsdtype(o,v->value))
M_F("rxctcssfreq",store_rxctcssfreq(o,v->value))
M_F("txctcssfreq",store_txctcssfreq(o,v->value))
M_F("rxgain",store_rxgain(o,v->value))
M_BOOL("rxboostset", o->rxboostset)
M_UINT("rxctcssrelax", o->rxctcssrelax)
M_F("txtoctype",store_txtoctype(o,v->value))
M_UINT("hdwtype", o->hdwtype)
M_UINT("duplex", o->radioduplex)
M_END(;
);
}
cfg1 = ast_config_load(config1, config_flags);
if (!cfg1)
{
o->rxmixerset = 500;
o->txmixaset = 500;
o->txmixbset = 500;
o->rxvoiceadj = 0.5;
o->rxctcssadj = 0.5;
o->txctcssadj = 200;
o->rxsquelchadj = 500;
ast_log(LOG_WARNING,"File %s not found, using default parameters.\n",config1);
} else {
for (v = ast_variable_browse(cfg1, ctg); v; v = v->next) {
M_START(v->name, v->value);
M_UINT("rxmixerset", o->rxmixerset)
M_UINT("txmixaset", o->txmixaset)
M_UINT("txmixbset", o->txmixbset)
M_F("rxvoiceadj",store_rxvoiceadj(o,v->value))
M_F("rxctcssadj",store_rxctcssadj(o,v->value))
M_UINT("txctcssadj",o->txctcssadj);
M_UINT("rxsquelchadj", o->rxsquelchadj)
M_END(;
);
}
ast_config_destroy(cfg1);
}
o->debuglevel=0;
if (o == &usbradio_default) /* we are done with the default */
return NULL;
o->lastopen = ast_tvnow(); /* don't leave it 0 or tvdiff may wrap */
o->dsp = ast_dsp_new();
if (o->dsp)
{
ast_dsp_set_features(o->dsp,DSP_FEATURE_DTMF_DETECT);
ast_dsp_digitmode(o->dsp,DSP_DIGITMODE_DTMF | DSP_DIGITMODE_MUTECONF | DSP_DIGITMODE_RELAXDTMF);
}
if(o->rxctcssfreq!=0 && o->rxdemod==RX_AUDIO_SPEAKER)
{
ast_log(LOG_ERROR, "Incompatable Options o->rxctcssfreq=%f and o->rxdemod=speaker\n", o->rxctcssfreq);
}
if(o->pmrChan==NULL)
{
t_pmr_chan tChan;
memset(&tChan,0,sizeof(t_pmr_chan));
tChan.rxDemod=o->rxdemod;
tChan.rxCdType=o->rxcdtype;
tChan.txMod=o->txprelim;
tChan.txMixA = o->txmixa;
tChan.txMixB = o->txmixb;
tChan.rxCpuSaver=o->rxcpusaver;
tChan.txCpuSaver=o->txcpusaver;
tChan.rxCtcssFreq=o->rxctcssfreq;
tChan.txCtcssFreq=o->txctcssfreq;
o->pmrChan=createPmrChannel(&tChan,FRAME_SIZE);
o->pmrChan->radioDuplex=o->radioduplex;
o->pmrChan->rxCpuSaver=o->rxcpusaver;
o->pmrChan->txCpuSaver=o->txcpusaver;
*(o->pmrChan->prxSquelchAdjust) =
((999 - o->rxsquelchadj) * 32767) / 1000;
o->pmrChan->spsRx->outputGain = o->rxvoiceadj*M_Q8;
o->pmrChan->txTocType = o->txtoctype;
if ((o->txmixa == TX_OUT_LSD) ||
(o->txmixa == TX_OUT_COMPOSITE) ||
(o->txmixb == TX_OUT_LSD) ||
(o->txmixb == TX_OUT_COMPOSITE))
{
*(o->pmrChan->prxCtcssAdjust)=o->rxctcssadj*M_Q8;
set_txctcss_level(o);
}
o->pmrChan->rxCtcss->relax=o->rxctcssrelax;
}
if( (o->txmixa!=TX_OUT_VOICE) && (o->txmixb!=TX_OUT_VOICE) &&
(o->txmixa!=TX_OUT_COMPOSITE) && (o->txmixb!=TX_OUT_COMPOSITE)
)
{
ast_log(LOG_ERROR,"No txvoice output configured.\n");
}
if( o->txctcssfreq &&
o->txmixa!=TX_OUT_LSD && o->txmixa!=TX_OUT_COMPOSITE &&
o->txmixb!=TX_OUT_LSD && o->txmixb!=TX_OUT_COMPOSITE
)
{
ast_log(LOG_ERROR,"No txtone output configured.\n");
}
if( o->rxctcssfreq && o->pmrChan->rxCtcssIndex<0 )
{
ast_log(LOG_ERROR,"Invalid CTCSS Frequency.\n");
}
// RxTestIt(o);
mixer_write(o);
mult_set(o);
hidhdwconfig(o);
// pmrdump(o);
if (pipe(o->sndcmd) != 0) {
ast_log(LOG_ERROR, "Unable to create pipe\n");
goto error;
}
printf("creating sound thread\n");
ast_pthread_create_background(&o->sthread, NULL, sound_thread, o);
/* link into list of devices */
if (o != &usbradio_default) {
o->next = usbradio_default.next;
usbradio_default.next = o;
}
return o;
error:
if (o != &usbradio_default)
free(o);
return NULL;
}
#if DEBUG_FILETEST == 1
/*
Test It on a File
*/
int RxTestIt(struct chan_usbradio_pvt *o)
{
const int numSamples = SAMPLES_PER_BLOCK;
const int numChannels = 16;
i16 sample,i,ii;
i32 txHangTime;
i16 txEnable;
t_pmr_chan tChan;
t_pmr_chan *pChan;
FILE *hInput=NULL, *hOutput=NULL, *hOutputTx=NULL;
i16 iBuff[numSamples*2*6], oBuff[numSamples];
printf("RxTestIt()\n");
pChan=o->pmrChan;
pChan->b.txCapture=1;
pChan->b.rxCapture=1;
txEnable = 0;
hInput = fopen("/usr/src/xpmr/testdata/rx_in.pcm","r");
if(!hInput){
printf(" RxTestIt() File Not Found.\n");
return 0;
}
hOutput = fopen("/usr/src/xpmr/testdata/rx_debug.pcm","w");
printf(" RxTestIt() Working...\n");
while(!feof(hInput))
{
fread((void *)iBuff,2,numSamples*2*6,hInput);
if(txHangTime)txHangTime-=numSamples;
if(txHangTime<0)txHangTime=0;
if(pChan->rxCtcss->decode)txHangTime=(8000/1000*2000);
if(pChan->rxCtcss->decode && !txEnable)
{
txEnable=1;
//pChan->inputBlanking=(8000/1000*200);
}
else if(!pChan->rxCtcss->decode && txEnable)
{
txEnable=0;
}
PmrRx(pChan,iBuff,oBuff);
fwrite((void *)pChan->prxDebug,2,numSamples*numChannels,hOutput);
}
pChan->b.txCapture=0;
pChan->b.rxCapture=0;
if(hInput)fclose(hInput);
if(hOutput)fclose(hOutput);
printf(" RxTestIt() Complete.\n");
return 0;
}
#endif
#include "./xpmr/xpmr.c"
/*
*/
static int load_module(void)
{
struct ast_config *cfg = NULL;
char *ctg = NULL;
struct ast_flags config_flags = { 0 };
/* Copy the default jb config over global_jbconf */
memcpy(&global_jbconf, &default_jbconf, sizeof(struct ast_jb_conf));
/* load config file */
if (!(cfg = ast_config_load(config, config_flags))) {
ast_log(LOG_NOTICE, "Unable to load config %s\n", config);
return AST_MODULE_LOAD_DECLINE;
}
do {
store_config(cfg, ctg);
} while ( (ctg = ast_category_browse(cfg, ctg)) != NULL);
ast_config_destroy(cfg);
if (find_desc(usbradio_active) == NULL) {
ast_log(LOG_NOTICE, "Device %s not found\n", usbradio_active);
/* XXX we could default to 'dsp' perhaps ? */
/* XXX should cleanup allocated memory etc. */
return AST_MODULE_LOAD_FAILURE;
}
if (ast_channel_register(&usbradio_tech)) {
ast_log(LOG_ERROR, "Unable to register channel type 'usb'\n");
return AST_MODULE_LOAD_FAILURE;
}
ast_cli_register_multiple(cli_usbradio, sizeof(cli_usbradio) / sizeof(struct ast_cli_entry));
return AST_MODULE_LOAD_SUCCESS;
}
/*
*/
static int unload_module(void)
{
struct chan_usbradio_pvt *o;
ast_log(LOG_WARNING, "unload_module() called\n");
ast_channel_unregister(&usbradio_tech);
ast_cli_unregister_multiple(cli_usbradio, sizeof(cli_usbradio) / sizeof(struct ast_cli_entry));
for (o = usbradio_default.next; o; o = o->next) {
ast_log(LOG_WARNING, "destroyPmrChannel() called\n");
if(o->pmrChan)destroyPmrChannel(o->pmrChan);
#if DEBUG_CAPTURES == 1
if (frxcapraw) { fclose(frxcapraw); frxcapraw = NULL; }
if (frxcaptrace) { fclose(frxcaptrace); frxcaptrace = NULL; }
if (frxoutraw) { fclose(frxoutraw); frxoutraw = NULL; }
if (ftxcapraw) { fclose(ftxcapraw); ftxcapraw = NULL; }
if (ftxcaptrace) { fclose(ftxcaptrace); ftxcaptrace = NULL; }
if (ftxoutraw) { fclose(ftxoutraw); ftxoutraw = NULL; }
#endif
close(o->sounddev);
if (o->sndcmd[0] > 0) {
close(o->sndcmd[0]);
close(o->sndcmd[1]);
}
if (o->dsp) ast_dsp_free(o->dsp);
if (o->owner)
ast_softhangup(o->owner, AST_SOFTHANGUP_APPUNLOAD);
if (o->owner) /* XXX how ??? */
return -1;
/* XXX what about the thread ? */
/* XXX what about the memory allocated ? */
}
return 0;
}
AST_MODULE_INFO_STANDARD(ASTERISK_GPL_KEY, "usb Console Channel Driver");
/* end of file */
Reference in New Issue View Git Blame Copy Permalink