https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163761 | tilghman | 2008-12-12 16:03:10 -0600 (Fri, 12 Dec 2008) | 7 lines
Simple fix for Ctrl-C not immediately exiting Asterisk, but also add a
pointer inside editline to look back to asterisk.c, so others don't spend
as much time as I did looking (in the wrong place) for the appropriate
function.
Reported by: ZX81, via the #asterisk-users channel
Fixed by: me (license 14)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163762 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r163383 | tilghman | 2008-12-11 17:35:55 -0600 (Thu, 11 Dec 2008) | 9 lines
When a Ctrl-C or Ctrl-D ends a remote console, on certain shells, the terminal
is messed up. By intercepting those events with a signal handler in the remote
console, we can avoid those issues.
(closes issue #13464)
Reported by: tzafrir
Patches:
20081110__bug13464.diff.txt uploaded by Corydon76 (license 14)
Tested by: blitzrage
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@163384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
After the nightly update of the documentation on asterisk.org, I'll post
an update to asterisk-dev with a pointer to the changes. This covers some
release branch and commit policy information. None of this should be a
surprise, since it's just documenting what we have already been doing.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162418 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r162413 | russell | 2008-12-09 16:17:39 -0600 (Tue, 09 Dec 2008) | 8 lines
Remove the test_for_thread_safety() function completely.
The test is not valid. Besides, if we actually suspected that recursive
mutexes were not working, we would get a ton of LOG_ERROR messages when
DEBUG_THREADS is turned on.
(inspired by a discussion on the asterisk-dev list)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@162414 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Based on cli_permissions.conf configuration file, we are able to permit or deny
cli commands based on some patterns and the local user and group running rasterisk.
(Sorry if I missed some of the testers).
Reviewboard: http://reviewboard.digium.com/r/11/
(closes issue #11123)
Reported by: eliel
Tested by: eliel, IgorG, Laureano, otherwiseguy, mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@160062 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r156164 | russell | 2008-11-12 11:29:52 -0600 (Wed, 12 Nov 2008) | 7 lines
Move the sanity check that makes sure "always fork" is not set along with the
console option to be after the code that reads options from asterisk.conf.
This resolves a situation where Asterisk can start taking up 100% when
misconfigured.
(Thanks to Bryce Porter (x86 on IRC) for letting me log in to his system to
figure out what was causing the 100% CPU problem.)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156166 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Add CLI aliases module to asterisk.
- Remove all deprecated CLI commands from the code
Initial work done by file.
Junk-Y and lmadsen did a lot of work and testing to
get the list of deprecated commands into the configuration file.
Deprecated CLI commands are now handled by this new module,
see cli_aliases.conf for more info about that.
ok russellb@ via reviewboard
(closes issue #13735)
Reported by: mvanbaak
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@156120 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit introduces the first phase of an effort to manage documentation of the
interfaces in Asterisk in an XML format. Currently, a new format is available for
applications and dialplan functions. A good number of conversions to the new format
are also included.
For more information, see the following message to asterisk-dev:
http://lists.digium.com/pipermail/asterisk-dev/2008-October/034968.html
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@153365 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r151905 | russell | 2008-10-25 05:59:02 -0500 (Sat, 25 Oct 2008) | 8 lines
Move AMI initialization to occur after loading modules. This prevents a
deadlock when someone tries to initiate a module reload from the AMI just
as Asterisk is starting.
(closes issue #13778)
Reported by: hotsblanc
Fix suggested by hotsblanc
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@151906 65c4cc65-6c06-0410-ace0-fbb531ad65f3
read from the .asterisk_history file (and subsequently being duplicated
when written). We weren't checking the result of fgets() which meant
that we read the same line twice before feof() actually returned non-
zero.
Also, stop writing out an extra blank line between each item in the
history file, fix a minor off-by-one error, and use symbolic constants
rather than a hardcoded integer.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@146359 65c4cc65-6c06-0410-ace0-fbb531ad65f3
when a file is invalid from when a file is missing. This is most important when
we have two configuration files. Consider the following example:
Old system:
sip.conf users.conf Old result New result
======== ========== ========== ==========
Missing Missing SIP doesn't load SIP doesn't load
Missing OK SIP doesn't load SIP doesn't load
Missing Invalid SIP doesn't load SIP doesn't load
OK Missing SIP loads SIP loads
OK OK SIP loads SIP loads
OK Invalid SIP loads incompletely SIP doesn't load
Invalid Missing SIP doesn't load SIP doesn't load
Invalid OK SIP doesn't load SIP doesn't load
Invalid Invalid SIP doesn't load SIP doesn't load
So in the case when users.conf doesn't load because there's a typo that
disrupts the syntax, we may only partially load users, instead of failing with
an error, which may cause some calls not to get processed. Worse yet, the old
system would do this with no indication that anything was even wrong.
(closes issue #10690)
Reported by: dtyoo
Patches:
20080716__bug10690.diff.txt uploaded by Corydon76 (license 14)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@142992 65c4cc65-6c06-0410-ace0-fbb531ad65f3
respectively. Also, take the opportunity to clean up the CLI prompt
generation code.
(closes issue #13175)
Reported by: eliel
Patches:
cliprompt.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@134353 65c4cc65-6c06-0410-ace0-fbb531ad65f3
to Asterisk licensing information. The licensing page includes the Asterisk license,
as well as a (not yet complete) list of 3rd party libraries that may be used, as well
as what license we receive them under.
Help filling out this list in the format that I have started in doxyref.h would be
much appreciated. :)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133575 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r133169 | mmichelson | 2008-07-23 14:39:47 -0500 (Wed, 23 Jul 2008) | 12 lines
As suggested by seanbright, the PSEUDO_CHAN_LEN in
app_chanspy should be set at load time, not at compile
time, since dahdi_chan_name is determined at load time.
Also changed the next_unique_id_to_use to have the
static qualifier.
Also added the dahdi_chan_name_len variable so that
strlen(dahdi_chan_name) isn't necessary. Thanks to
seanbright for the suggestion.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@133171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
calculate the number of bytes from a sysinfo structure.
unsigned long.
(closes issue #13057)
Reported by: eliel
Patches:
asterisk.c.patch uploaded by eliel (license 64)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@131445 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r125132 | kpfleming | 2008-06-25 17:21:30 -0500 (Wed, 25 Jun 2008) | 10 lines
allow tonezone to live in a different place than DAHDI/Zaptel, since dahdi-tools and dahdi-linux are now separate packages and can be installed in different places
don't include tonezone.h in dahdi_compat.h, because only a couple of modules need it
get app_rpt building again after the DAHDI changes
(closes issue #12911)
Reported by: tzafrir
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@125138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Convert chan_iax2 to use the timing API
- Convert usage of timing in the core to use the timing API instead of
using DAHDI directly
- Make a change to the timing API to add the set_rate() function
- change the timing core to use a rwlock
- merge a timing implementation, res_timing_dahdi
Basic testing was successful using res_timing_dahdi
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@122523 65c4cc65-6c06-0410-ace0-fbb531ad65f3
DUNDi uses a concept called the Entity ID for unique server identifiers. I have
pulled out the handling of EIDs and made it something available to all of Asterisk.
There is now a global Entity ID that can be used for other purposes as well, such
as code providing distributed device state, which is why I did this. The global
Entity ID is set automatically, just like it was done in DUNDi, but it can also be
set in asterisk.conf. DUNDi will now use this global EID unless one is specified
in dundi.conf.
The current EID for the system can be seen in the "core show settings" CLI command.
It is also available in the dialplan via the ENTITYID variable.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@121439 65c4cc65-6c06-0410-ace0-fbb531ad65f3
and off for new installations. This includes the translation from pipes to commas
for pbx_realtime and the EXEC command for AGI, as well as the change to the Set
application not to support multiple variables at once.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@120171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r118465 | tilghman | 2008-05-27 13:58:09 -0500 (Tue, 27 May 2008) | 8 lines
NULL character should terminate only commands back to the core, not log
messages to the console.
(closes issue #12731)
Reported by: seanbright
Patches:
20080527__bug12731.diff.txt uploaded by Corydon76 (license 14)
Tested by: seanbright
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@118466 65c4cc65-6c06-0410-ace0-fbb531ad65f3
display this information in the "core show settings" CLI command. This is
useful if you want to verify that you're running a build with DONT_OPTIMIZE,
DEBUG_THREADS, etc.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@117756 65c4cc65-6c06-0410-ace0-fbb531ad65f3
