actual problems, per se. I also added format attributes to any printf wrapper functions I found that didn't have them. -Wsecurity and -Wmissing-format-attribute added to --enable-dev-mode.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@109447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
- Remove some magic in unload_module that isn't needed. Module use counts
already ensure that the function isn't going to be in use at this point.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@108034 65c4cc65-6c06-0410-ace0-fbb531ad65f3
a variable from an Asterisk configuration file in the dialplan, or anywhere
else where dialplan functions can be used.
(Inspired by a discussion with Tilghman and Pari)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@107787 65c4cc65-6c06-0410-ace0-fbb531ad65f3
do some additional code cleanup and improvement in passing.
(closes issue #12106)
Reported by: nizon
Patches:
devstate-patch.txt uploaded by nizon (license 415)
-- Updated to trunk, and tab completion added by me
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@105461 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #8925)
About a year ago, as Leif Madsen and Jim van Meggelen were going over the CLI
commands in Asterisk 1.4 for the next version of their book, they documented
a lot of inconsistencies. This set of changes addresses all of these issues
and has been reviewed by Leif.
While this does introduce even more changes to the CLI command structure, it
makes everything consistent, which is the most important thing.
Thanks to all that helped with this one!
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@103171 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I just added the ability to set multiple fields at once after discussions with
Tilghman and Russell. Currently limited to 30 fields.
(closes issue #11887)
Reported by: sergee
Patches:
rt-func-store-destroy-multivalue.diff uploaded by otherwiseguy (license 396)
Tested by: sergee, otherwiseguy
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@102700 65c4cc65-6c06-0410-ace0-fbb531ad65f3
based on configuration templates that use Asterisk dialplan function and
variable substitution. It should be possible to create phone profiles and
templates that work for the majority of phones provisioned over http. It
is currently only intended to provision a single user account per phone.
An example profile and set of templates for Polycom phones is provided.
NOTE: Polycom firmware is not included, but should be placed in
AST_DATA_DIR/phoneprov/configs to match up with the included templates.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@97634 65c4cc65-6c06-0410-ace0-fbb531ad65f3
revision changed, every module that used the version was getting rebuilt after
every svn update. This severly annoyed me pretty quickly, so I have improved
the situation.
Now, instead of generating version.h, main/version.c is generated. version.c
includes the version information, as well as a couple of API calls for modules
to retrieve the version. So now, only version.c will get rebuilt, and the main
asterisk binary relinked, which is must faster than rebuilding http.c, manager.c,
asterisk.c, relinking the asterisk binary, chan_sip.c, func_version.c, res_agi ...
The only minor change in behavior here is that the version information reported by
chan_sip, for example, is the version of the Asterisk core, and not necessarily the
Asterisk version that the chan_sip module came from.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@96717 65c4cc65-6c06-0410-ace0-fbb531ad65f3
iconv dependency for func_iconv.
This fixes some build issues on CYGWIN and FreeBSD and probably
other platforms where libiconv is not there by default
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@95624 65c4cc65-6c06-0410-ace0-fbb531ad65f3
the existence of a dialplan target.
(closes issue #11579)
Reported by: irroot
Patches:
func_dialplan2.c uploaded by irroot (license 52)
-- Additional changes by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@94799 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r93180 | kpfleming | 2007-12-16 22:44:51 -0800 (Sun, 16 Dec 2007) | 23 lines
In http://lists.digium.com/pipermail/asterisk-dev/2007-December/031145.html,
rizzo brought up some issues related to the way that the metadata required
for menuselect and the rest of the build system is extracted from the source
files. Since I had a few hours to kill on an airplane today, I decided to
improve this situation... so now the system caches the extracted metadata
and uses it to build the menuselect 'tree' as much as it can. The result
of this is that when a single source file is changed, only the metadata for
that file needs to be extracted again, and the rest is used from the cache
files. I also reduced the number of forked processes required to do the
metadata extraction; it was actually possible to do most of what we needed
in the Makefiles themselves without using any shell scripts at all! On my
laptop, these changes resulted in an 80% decrease in the time required
for the 'menuselect.makeopts' automatic check to occur after editing a single
source file.
While doing this work I also cleaned up a few minor things in the Makefiles,
adding a check for 'awk' to the configure script and changed all remaining
places we use 'grep' or 'awk' to use the ones found by the configure script,
and changed the 'prep_tarball' script to build the menuselect metadata so
that tarballs of Asterisk will include it and won't require the user to
wait while it is extracted after unpacking.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93184 65c4cc65-6c06-0410-ace0-fbb531ad65f3
equivalent to the check done by ast_verb, I wrote a macro, VERBOSITY_LEVEL, which does this
check. I did a quick look in the source and used this macro in some places where option_verbose
was used.
I also converted some verbose messages in logger.c to use ast_verb instead of ast_verbose.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@93042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
generate loadable and embedded module lists.
Individual Makefiles now are a lot simpler, possibly as simple as this:
-include $(ASTTOPDIR)/menuselect.makeopts $(ASTTOPDIR)/menuselect.makedeps
MODULE_PREFIX=cdr_
all: _all
include $(ASTTOPDIR)/Makefile.moddir_rules
and also more flexible because in a single directory we can combine
various types of modules (app_, cdr_, func_, ... ) by simply
listing them in the MODULE_PREFIX variable.
The individual Makefiles can also create list of modules to be
excluded by listing them in the variablel MODULE_EXCLUDE (see an
example in channels/Makefile).
With this change it becomes trivial to integrate a directory with
locally created/modified sources into the main build.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@92082 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r90145 | russell | 2007-11-28 18:20:34 -0600 (Wed, 28 Nov 2007) | 5 lines
This set of changes is to make some callerID handling thread-safe.
The ast_set_callerid() function needed to lock the channel. Also, the handlers
for the CALLERID() dialplan function needed to lock the channel when reading
or writing callerid values directly on the channel structure.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@90146 65c4cc65-6c06-0410-ace0-fbb531ad65f3
build times - tested, there is no measureable difference before and
after this commit.
In this change:
use asterisk/compat.h to include a small set of system headers:
inttypes.h, unistd.h, stddef.h, stddint.h, sys/types.h, stdarg.h,
stdlib.h, alloca.h, stdio.h
Where available, the inclusion is conditional on HAVE_FOO_H as determined
by autoconf.
Normally, source files should not include any of the above system headers,
and instead use either "asterisk.h" or "asterisk/compat.h" which does it
better.
For the time being I have left alone second-level directories
(main/db1-ast, etc.).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@89333 65c4cc65-6c06-0410-ace0-fbb531ad65f3
