Some providers require a multiple of 20 for the maxptime or fail to complete calls,
e.g. Vivo in Brazil. To increase compatibility, only multiples of 20 are now used.
Resolves: #260
(cherry picked from commit ca1ed84820)
Previously, DETECT_DEADLOCKS depended on DEBUG_THREADS.
Unfortunately, DEBUG_THREADS adds a lot of lock tracking overhead
to all of the lock lifecycle calls whereas DETECT_DEADLOCKS just
causes the lock calls to loop over trylock in 200us intervals until
the lock is obtained and spits out log messages if it takes more
than 5 seconds. From a code perspective, the only reason they were
tied together was for logging. So... The ifdefs in lock.c were
refactored to allow DETECT_DEADLOCKS to be enabled without
also enabling DEBUG_THREADS.
Resolves: #321
UserNote: You no longer need to select DEBUG_THREADS to use
DETECT_DEADLOCKS. This removes a significant amount of overhead
if you just want to detect possible deadlocks vs needing full
lock tracing.
(cherry picked from commit e1050b4add)
The CLI .asterisk_history file is read from/written to the directory
specified by the HOME environment variable. If the root user starts
asterisk with the -U/-G options, or with runuser/rungroup set in
asterisk.conf, the asterisk process is started as root but then it
calls setuid/setgid to set the new user/group. This does NOT reset
the HOME environment variable to the new user's home directory
though so it's still left as "/root". In this case, the new user
will almost certainly NOT have access to read from or write to the
history file.
* Added function process_histfile() which calls
getpwuid(geteuid()) and uses pw->dir as the home directory
instead of the HOME environment variable.
* ast_el_read_default_histfile() and ast_el_write_default_histfile()
have been modified to use the new process_histfile()
function.
Resolves: #337
(cherry picked from commit fc516f5781)
From the gdb information, ast_websocket_read reads a message successfully,
then transport_read is called in the serializer. During execution of pjsip_transport_down,
ws_session->stream->fd is closed; ast_websocket_read encounters an error and exits the while loop.
After executing transport_shutdown, the transport's reference count becomes 0, causing a crash when sending SIP messages.
This was due to pjsip_transport_dec_ref executing earlier than pjsip_rx_data_clone, leading to this issue.
In websocket_cb executeing pjsip_transport_add_ref, this we now ensure the transport is not destroyed while in the loop.
Resolves: asterisk#299
(cherry picked from commit a38add11e6)
Add a wrapper function around ast_cel_publish_event that
packs event and extras into a blob before publishing
Resolves:#330
(cherry picked from commit 4592f97c36)
To terminate a console channel, stop_stream causes pthread_cancel
to make stream_monitor exit. However, commit 5b8fea93d1
added locking to this function which results in deadlock due to
the stream_monitor thread being killed while it's holding the pvt lock.
To resolve this, a flag is now set and read to indicate abort, so
the use of pthread_cancel and pthread_kill can be avoided altogether.
Resolves: #308
(cherry picked from commit 3b027d1e47)
To better co-exist with sounds files that may be managed by
packages, custom sound files may now be placed in
AST_DATA_DIR/sounds/custom instead of the standard
AST_DATA_DIR/sounds/<lang> directory. If the new
"sounds_search_custom_dir" option in asterisk.conf is set
to "true", asterisk will search the custom directory for sounds
files before searching the standard directory. For performance
reasons, the "sounds_search_custom_dir" defaults to "false".
Resolves: #315
UserNote: A new option "sounds_search_custom_dir" has been added to
asterisk.conf that allows asterisk to search
AST_DATA_DIR/sounds/custom for sounds files before searching the
standard AST_DATA_DIR/sounds/<lang> directory.
(cherry picked from commit 0e0f99db1d)
In function rtp_ioqueue_thread_remove counter in ioqueue object is not decreased
which prevents unused ICE TURN threads from being removed.
Resolves: #301
(cherry picked from commit 56244a7371)
The ast_sip_subscription_handler "test_handler" used for the unit
tests didn't set "body_type" so the NULL value was causing
a SEGV in build_subscription_tree(). It's now set to "".
Resolves: #335
(cherry picked from commit 71d75373f9)
The previous behavior of make_buildopts_h was to not add the
non-ABI-breaking MENUSELECT_CFLAGS like DETECT_DEADLOCKS,
REF_DEBUG, etc. to the buildopts.h file because "it caused
ccache to invalidate files and extended compile times". They're
only defined by passing them on the gcc command line with '-D'
options. In practice, including them in the include file rarely
causes any impact because the only time ccache cares is if you
actually change an option so the hit occurrs only once after
you change it.
OK so why would we want to include them? Many IDEs follow the
include files to resolve defines and if the options aren't in an
include file, it can cause the IDE to mark blocks of "ifdeffed"
code as unused when they're really not.
So...
* Added a new menuselect compile option ADD_CFLAGS_TO_BUILDOPTS_H
which tells make_buildopts_h to include the non-ABI-breaking
flags in buildopts.h as well as the ABI-breaking ones. The default
is disabled to preserve current behavior. As before though,
only the ABI-breaking flags appear in AST_BUILDOPTS and only
those are used to calculate AST_BUILDOPT_SUM.
A new AST_BUILDOPT_ALL define was created to capture all of the
flags.
* make_version_c was streamlined to use buildopts.h and also to
create asterisk_build_opts_all[] and ast_get_build_opts_all(void)
* "core show settings" now shows both AST_BUILDOPTS and
AST_BUILDOPTS_ALL.
UserNote: The "Build Options" entry in the "core show settings"
CLI command has been renamed to "ABI related Build Options" and
a new entry named "All Build Options" has been added that shows
both breaking and non-breaking options.
(cherry picked from commit 42f82d55b0)
func_periodic_hook does not hangup after playback, relying on hangup
which keeps the channel alive longer than necessary.
Resolves: #325
(cherry picked from commit 2265eafb3a)
func_periodic_hook was truncating long channel names which
causes issues when you need to run other dialplan functions/apps
on the channel.
Resolves: #319
(cherry picked from commit cff637a24f)
If the safe_asterisk script detects that the /var/lib/asterisk
directory doesn't exist, it now creates it with 755 permissions
instead of 770. safe_asterisk needing to create that directory
should be extremely rare though because it's normally created
by 'make install' which already sets the permissions to 755.
Resolves: #316
(cherry picked from commit 6bd9f9ae81)
Resolves: #298
UserNote: The dial string option 'g' was added to the UnicastRTP channel
which enables RTP glue and therefore native RTP bridges with those
channels.
(cherry picked from commit 1af2ae177c)
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
UserNote: Introduce a new queue configuration option called
'periodic-announce-startdelay' which will vary the normal (historic)
behavior of starting the periodic announcement cycle at
periodic-announce-frequency seconds after entering the queue to start
the periodic announcement cycle at period-announce-startdelay seconds
after joining the queue. The default behavior if this config option is
not set remains unchanged.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
(cherry picked from commit 130c3ab792)
Using the Set dialplan application does not actually
delete channel or global variables. Instead the
variables are set to an empty value.
This change adds two dialplan functions,
GLOBAL_DELETE and DELETE which can be used to
delete global and channel variables instead
of just setting them to empty.
There is also no ability within the dialplan to
determine if a global or channel variable has
actually been set or not.
This change also adds two dialplan functions,
GLOBAL_EXISTS and VARIABLE_EXISTS which can be
used to determine if a global or channel variable
has been set or not.
Resolves: #289
UserNote: Four new dialplan functions have been added.
GLOBAL_DELETE and DELETE have been added which allows
the deletion of global and channel variables.
GLOBAL_EXISTS and VARIABLE_EXISTS have been added
which checks whether a global or channel variable has
been set.
(cherry picked from commit 182ad6926b)
* Since ICE candidates are used for the check and pjproject is
required to use ICE, res_rtp_asterisk was failing to compile
when pjproject wasn't available. The check is now wrapped
with an #ifdef HAVE_PJPROJECT.
* The rtp->ice_active_remote_candidates container was being
used to check the address on incoming packets but that
container doesn't contain peer reflexive candidates discovered
during negotiation. This was causing the check to fail
where it shouldn't. We now check against pjproject's
real_ice->rcand array which will contain those candidates.
* Also fixed a bug in ast_sockaddr_from_pj_sockaddr() where
we weren't zeroing out sin->sin_zero before returning. This
was causing ast_sockaddr_cmp() to always return false when
one of the inputs was converted from a pj_sockaddr, even
if both inputs had the same address and port.
Resolves: #500Resolves: #503Resolves: #505
When updating an existing header the 'update' code incorrectly
just copied the new value into the existing buffer. If the
new value exceeded the available buffer size memory outside
of the buffer would be written into, potentially causing
a crash.
This change makes it so that the 'update' now duplicates
the new header value instead of copying it into the existing
buffer.
Add patch to split the log level for invalid packets received on the
signaling port. The warning regarding the packet will move to level 2
so that it can still be displayed, while the raw packet will be at level
4.
When ICE is in use, we can prevent a possible DOS attack by allowing
DTLS protocol messages (client hello, etc) only from sources that
are in the active remote candidates list.
Resolves: GHSA-hxj9-xwr8-w8pq
When using AMI GetConfig, it was possible to access files outside of the
Asterisk configuration directory by using filenames with ".." and "./"
even while live_dangerously was not enabled. This change resolves the
full path and ensures we are still in the configuration directory before
attempting to access the file.
All of the links that reference page anchors with capital letters in
the ids (#Something) have been changed to lower case to match the
anchors that are generated by mkdocs.
(cherry picked from commit c4508accc6)
Handle session interval lower than endpoint's configured minimum timer
when sending first answer. Timer setting is checked during this step and
needs to handled appropriately.
Before this change, no response was sent at all. After this change a
response with 422 Session Interval too small is sent to UAC.
(cherry picked from commit 9284dca636)
If the called party hangs up while digits are being
sent, -1 is returned to indicate so, but app_dial
was not checking the return value, resulting in
the hangup being lost and looping forever until
the caller manually hangs up the channel. We now
abort if digit sending fails.
ASTERISK-29428 #close
Resolves: #281
(cherry picked from commit c032d38d3f)
Add quoting around the ps_endpoints 100rel column in the ALTER
statements. Although alembic doesn't complain when generating
sql statements, postgresql does (rightly so).
Resolves: #274
(cherry picked from commit f8438714ca)
* Fixed issue with the script not parsing the new tag format for
certified releases. The format changed from certified/18.9-cert5
to certified-18.9-cert5.
* Fixed issue where the asterisk version wasn't being considered
when looking for cached versions.
Resolves: #263
(cherry picked from commit 644ad2f9cd)
This adds support for Called Subscriber Held for FXS
lines, which allows users to go on hook when receiving
a call and resume the call later from another phone on
the same line, without disconnecting the call. This is
a convenience mechanism that most real PSTN telephone
switches support.
ASTERISK-30372 #close
Resolves: #240
UserNote: Called Subscriber Held is now supported for analog
FXS channels, using the calledsubscriberheld option. This allows
a station user to go on hook when receiving an incoming call
and resume from another phone on the same line by going on hook,
without disconnecting the call.
(cherry picked from commit cd0bfe193f)
This reverts commit 617dad4cba.
apps/app_stack.c: Revert buggy gosub patch
This seems to break the case when a predial macro calls a gosub.
When the gosub calls return, the Return function outputs:
app_stack.c:423 return_exec: Return without Gosub: stack is empty
This returns -1 to the calling macro, which returns to app_dial
and causes the call to hangup instead of proceeding with the macro
that invoked the gosub.
Resolves: #253
(cherry picked from commit 1d7ae8d227)
Fixes dependency solutions in install_prereq for Debian aarch64
platforms. install_prereq was attempting to forcibly install 32-bit
armhf packages due to the aptitude search for dependencies.
Resolves: #37
(cherry picked from commit 2f02095da8)
If the contact_user is configured on the endpoint it will now be set on the local Contact header URI for incoming calls. The contact_user has already been set on the local Contact header URI for outgoing calls.
Resolves: #226
(cherry picked from commit 720813dc97)
Added a new boolean configuration flag -
`order_multi_row_results_by_initial_column` - to both res_pgsql.conf
and res_config_odbc.conf that allows the administrator to disable the
explicit `ORDER BY` that was previously being added to all generated
SQL statements that returned multiple rows.
Fixes: #179
(cherry picked from commit 1171beb7e4)
An earlier cherry-pick that involved rest-api somehow didn't include
a comment change in res/ari/resource_endpoints.h. This commit
corrects that. No changes other than the comment.
(cherry picked from commit 21b0522abd)
The documentation for PJSIP_HEADERS claims that
prefix is optional, but in the code it is actually not.
However, there is no inherent reason for this, as users
may want to retrieve all header names, not just those
beginning with a certain prefix.
This makes the prefix optional for this function,
simply fetching all header names if not specified.
As a result, the documentation is now correct.
Resolves: #230
UserNote: The prefix argument to PJSIP_HEADERS is now
optional. If not specified, all header names will be
returned.
(cherry picked from commit 2179082eaf)
The default is 32 with 8 being used by pjproject itself. Recent
commits have put us over the limit resulting in assertions in
pjproject. Since this value is used in invites, dialogs,
transports and subscriptions as well as the global pjproject
endpoint, we don't want to increase it too much.
Resolves: #255
(cherry picked from commit d3ee0e6516)
In some cases I have yet to determine some stasis messages may
be created without a channel snapshot. This change adds some
tolerance to this scenario, preventing a crash from occurring.
(cherry picked from commit a75035be55)
