For outgoing TCP connections, Asterisk uses the first IP address of the
interface instead of the IP address we asked him to bind to.
ASTERISK-26922 #close
Reported-by: Ksenia
Change-Id: I43c71ca89211dbf1838e5bcdb9be8d06d98e54eb
Some equipments may send a re-INVITE containing an SDP in the final ACK
request. If this happens in the context of direct media, the remote end
should be updated with a re-INVITE.
This patch queues an "update RTP peer" frame to trigger the re-INVITE,
instead of the "source change" frame wich was used previously.
ASTERISK-26951
Change-Id: I3644d2025f20e086ea9f8f62b486172c52b5b2e6
This saves around 100 bytes when G.711, G.722, G.729, and GSM are advertised in
SDP. This reduces the chance to hit the MTU bearer of 1300 bytes for SIP over
UDP, if many codecs are allowed in Asterisk. This new feature is enabled
together with the optional feature compact_headers=yes via the file pjsip.conf.
ASTERISK-26932 #close
Change-Id: Iaa556ab4c8325cd34c334387ab2847fab07b1689
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
SIP user-agents indicate which protocol extensions are allowed in headers
like Supported and Required. Such protocol extensions are Session Timers
(RFC 4028) for example. Session Timers are supported since Mantis-10665.
Since ASTERISK-21721, not only the first but multiple Supported/Required
headers in a message are parsed. In that change, an existing variable was
re-used within a newly added do-loop. Currently, at the end of that loop,
that variable is an empty string always. Previously, that variable was used
within log output. However, the log output was not changed.
ASTERISK-26915 #close
Change-Id: I09315f31b4d78fb214bb2a9fb6c0f5e143eae990
When receiving a 422 response, the invitestate variable must be reset to
INV_CALLING.
ASTERISK-26841
Change-Id: Ia0502d6b02192664cefa4e75bafdd2645ce56099
* manager.c:manager_state_cb() Fix potential use of uninitialized hint[]
if a hint does not exist for the requested extension. Ran into this when
developing a testsuite test. The AMI event ExtensionStatus came out with
the hint header value containing garbage. The AMI event PresenceStatus
also had the same issue.
* manager.c:action_extensionstate() no need to completely initialize the
hint[]. Only initialize the first element.
* pbx.c:ast_add_hint() Remove unnecessary assignment.
* chan_sip.c: Eliminate an unneeded hint[] local variable. We only care
about the return value of ast_get_hint() there.
Change-Id: Ia9a8786f01f93f1f917200f0a50bead0319af97b
* app_minivm: Use built-in completion facilities to complete optional
arguments.
* app_voicemail: Use built-in completion facilities to complete
optional arguments.
* app_confbridge: Add missing colons after 'Usage' text.
* chan_alsa: Use built-in completion facilities to complete optional
arguments.
* chan_sip: Use built-in completion facilities to complete optional
arguments. Add completions for 'load' for 'sip show user', 'sip show
peer', and 'sip qualify peer.'
* chan_skinny: Correct and extend completions for 'skinny reset' and
'skinny show line.'
* func_odbc: Correct completions for 'odbc read' and 'odbc write'
* main/astmm: Use built-in completion facilities to complete arguments
for 'memory' commands.
* main/bridge: Correct completions for 'bridge kick.'
* main/ccss: Use built-in completion facilities to complete arguments
for 'cc cancel' command.
* main/cli: Add 'all' completion for 'channel request hangup.' Correct
completions for 'core set debug channel.' Correct completions for 'core
show calls.'
* main/pbx_app: Remove redundant completions for 'core show
applications.'
* main/pbx_hangup_handler: Remove unused completions for 'core show
hanguphandlers all.'
* res_sorcery_memory_cache: Add completion for 'reload' argument of
'sorcery memory cache stale' and properly implement.
Change-Id: Iee58c7392f6fec34ad9d596109117af87697bbca
We shouldn't unlock the channel after starting a snapshot staging because
another thread may interfere and do its own snapshot staging.
* app_dial.c:dial_exec_full() made hold the channel lock while setting up
the outgoing channel staging. Made hold the channel lock after the called
party answers while updating the caller channel staging.
* chan_sip.c:sip_new() completed the channel staging on off-nominal exit.
Also we need to use ast_hangup() instead of ast_channel_unref() at that
location.
* channel.c:__ast_channel_alloc_ap() added a comment about not needing to
complete the channel snapshot staging on off-nominal exit paths.
* rtp_engine.c:ast_rtp_instance_set_stats_vars() made hold the channel
locks while staging the channels for the stats channel variables.
Change-Id: Iefb6336893163f6447bad65568722ad5d5d8212a
The escalator works by creating a set of startup commands in cli.conf
that set up logger channels and issue the debug commands for the
subsystems specified. If asterisk is running when it is executed,
the same commands will be issued to the running instance. The original
cli.conf is saved before any changes are made and can be restored by
executing '$prog --reset'.
The log output will be stored in...
$astlogdir/message.$uniqueid
$astlogdir/debug.$uniqueid
$astlogdir/dtmf.$uniqueid
$astlogdir/fax.$uniqueid
$astlogdir/security.$uniqueid
$astlogdir/pjsip_history.$uniqueid
$astlogdir/sip_history.$uniqueid
Some minor tweaks were made to chan_sip, and res_pjsip_history
so their history output could be send to a log channel as packets
are captured.
A minor tweak was also made to manager so events are output to verbose
when "manager set debug on" is issued.
Change-Id: I799f8e5013b86dc5282961b27383d134bf09e543
After a SIP_CODEC_INBOUND in the dialplan, do not continue with cached formats
but remember the joint format. Cached formats contain default parameters,
often create an empty fmtp line. However, a joint format might have passed
format_get_joint(.) in a res_format_attr_* module (like Opus Codec) and
contain the resulting format parameters from a SDP negotiation.
ASTERISK-26691 #close
Change-Id: I35712d98a793d4c3efdd156cec57deab9014b1dc
In some situations TCP threads may become frozen. This creates the
possibility that Asterisk could segfault if they become unfrozen after
chan_sip has been dlclose'd. This reorders the unload_module process to
allow abort if threads do not exit within 5 seconds.
High level order as follows:
1) Unregister from the core to stop new requests.
2) Signal threads to stop
3) Clear config based tables (but do not free the table itself).
4) Verify that threads have shutdown, cancel unload if not.
5) Clean all remaining resources.
ASTERISK-26586
Change-Id: Ie23692041d838fbd35ece61868f4c640960ff882
RFC says SIP headers look like:
HCOLON = *( SP / HTAB ) ":" SWS
SWS = [LWS] ; sep whitespace
LWS = [*WSP CRLF] 1*WSP ; linear whitespace
WSP = SP / HTAB ; from rfc2234
chan_sip implemented this:
HCOLON = *( LOWCTL / SP ) ":" SWS
LOWCTL = %x00-1F ; CTL without DEL
This discrepancy meant that SIP proxies in front of Asterisk with
chan_sip could pass on unknown headers with \x00-\x1F in them, which
would be treated by Asterisk as a different (known) header. For
example, the "To\x01:" header would gladly be forwarded by some proxies
as irrelevant, but chan_sip would treat it as the relevant "To:" header.
Those relying on a SIP proxy to scrub certain headers could mistakenly
get unexpected and unvalidated data fed to Asterisk.
This change fixes so chan_sip only considers SP/HTAB as valid tokens
before the colon, making it agree on the headers with other speakers of
SIP.
ASTERISK-26433 #close
AST-2016-009
Change-Id: I78086fbc524ac733b8f7f78cb423c91075fd489b
Per RFC 7118 5.2, the SIP URI 'transport' parameter should advertise
'ws' when WebSockets are to be used as the transport. This applies to
both secure and insecure WebSockets.
There were two bugs in Asterisk with respect to this:
(1) The most egregious occurs in res_pjsip. There, we advertise 'ws' for
insecure websockets and 'wss' for secure websockets. While this
would seem to make sense - since 'WS' and 'WSS' are used for the Via
Transport parameter - this is not the case for the SIP URI. This
patch corrects that by registering the secure websockets with
pjproject using the shorthand 'WS', and by returning 'ws' when asked
for the transport parameter. Note that in pjproject, it is perfectly
valid to have multiple transports use the same shorthand.
(2) In chan_sip, we return an upper-case version of the transport 'WS'
instead of 'ws'. Since we should be strict in what we send and
liberal in what we accept (within reason), this patch lower-cases
the transport before appending it to the parameter.
ASTERISK-24330 #close
Reported by: cervajs, Inaki Baz Castillo
Change-Id: Iff77b645f8cc3b7cd35168a6676c26b147f22f42
If a TCP/TLS connection was pending (not accepted and not timed out) during
unload of chan_sip, Asterisk would segfault when trying to send a signal to
a thread whose thread ID hadn't been recorded yet. This commit fixes that by
recording the thread ID before calling the blocking connect() syscall.
This was a regression introduced by 776a14386a.
The above wasn't enough to fix the segfault, which was now delayed to the
point where connect() timed out. Therefore, it was necessary to also remove
the SA_RESTART flag from the SIGURG sigaction so that pthread_kill() could be
used to interruput the connect() syscall.
This was a regression introduced by 5d313f51b9.
ASTERISK-26586 #close
Change-Id: I76fd9d47d56e4264e2629bce8ec15fecba673e7b
fopencookie/funclose is a non-standard API and should not be used
in portable software. Additionally, the way FILE's fd is used in
non-blocking mode is undefined behaviour and cannot be relied on.
This introduces internal abstraction for io streams, that allows
implementing the desired virtualization of read/write operations
with necessary timeout handling.
ASTERISK-24515 #close
ASTERISK-24517 #close
Change-Id: Id916aef418b665ced6a7489aef74908b6e376e85
Correct typo of end-pints to end-points
Re-wrap session timer parameter docs to max 80 chars wide; this
eases reading on terminals with lower resolution, commonly the case
for those with visual impairments.
ASTERISK-26573
Change-Id: I22c94459f4bb6b8a2f6713cfd22e87c32f204e6b
Signed-off-by: C.J. Collier <cjcollier@linuxfoundation.org>
This reverts commit 93332cb1d0.
Unfortunately, the aforementioned commit caused a regression (incoming calls
would eventually disconnect). Thus it is being removed.
ASTERISK-26523 #close
ASTERISK-25270
Change-Id: Ibf5586adc303073a8eac667a4cbfdb6be184a64d
If in sip.conf (general section) set option register_retry_403=no,
the command "sip show settings" return value:
Outbound reg. retry 403:0
If in sip.conf (general section) set option register_retry_403=yes,
the command "sip show settings" return value:
Outbound reg. retry 403:-1
* In static char "sip show settings" for "Outbound.reg. retry 403"
option use AST_CLI_YESNO
ASTERISK-26476 #close
Change-Id: I3c14272f05f1067bd2aeaa8b3ef9cf8fcb12dcf9
ASTERISK_REGISTER_FILE no longer has any purpose so this commit removes
all traces of it.
Previously exported symbols removed:
* __ast_register_file
* __ast_unregister_file
* ast_complete_source_filename
This also removes the mtx_prof static variable that was declared when
MTX_PROFILE was enabled. This variable was only used in lock.c so it
is now initialized in that file only.
ASTERISK-26480 #close
Change-Id: I1074af07d71f9e159c48ef36631aa432c86f9966
Previously, the settings videosupport=always and videosupport=yes behaved
identically and unconditionally caused a video offer to be sent in the SDP on
an outgoing call. This was a regression introduced with commit
5a1d90e1fb in Asterisk 1.6.1.
This commit restores correct behavior: videosupport=always causes a video offer
to be sent unconditionally, while videosupport=yes will only offer video on an
outbound channel if the incoming channel it is bridged to also supports video.
That way, the device receiving the outgoing call can display the correct user
interface elements for audio or video and will not unnecessarily show a blank
video window on an audio-only call.
ASTERISK-17470 #close
Change-Id: I782f4409d436114dbc97061c3570c0cd24f7c3ae
In the SIP channel driver chan_sip, auto_comedia was expected to be used in
tandem with auto_force_rport. Or stated differently: Only when auto_force_rport
was chosen (the default), auto_comedia worked. This change allows auto_comedia
to be set independently of the state of (auto_)force_rport. For example,
nat=force_rport,auto_comedia is useful for IPv4/IPv6 Dual Stack deployments
when IPv6 clients are behind a Firewall.
ASTERISK-26457 #close
Change-Id: Ib29d66c6dbb61648e371e01fc36c6978ddae5bc2
In the SIP channel driver chan_sip, the default is "auto_force_rport". When no
NAT was detected, for example in case of IPv6, Asterisk uses the IP address
from the headers within the SIP-REGISTER for subsequent SIP signaling. When
the remote party specifies support for Symmetric Response (RFC 3581) via the
parameter "rport", Asterisk should not extract the port from the SIP headers
but reuse the port of the transport. This did not happen because of a typo.
ASTERISK-26438 #close
Change-Id: If6e7891848aaf96666dee5305695f7c6667cd5a6
For the channel driver chan_sip, you specify externhost=example.com in sip.conf
when your Asterisk is behind a NAT and your IP address is assigned dynamically.
Or stated differently: You do not have a static IP address to use "externaddr"
directly. This NAT support is quite handy but just about IPv4. Previously,
Asterisk resolved "externhost" to any IP version. When the first DNS answer
resolved to an IPv6, Asterisk sent an IPv6 in SIP/SDP for origin (o=) and
connection (c=). This happened in outgoing SIP-REGISTER and while answering
SIP-INVITE. If the remote peer is IPv4-only, it might not handle o=/c= with an
IPv6. This change makes sure, no IPv6 is resolved anymore for "externhost".
ASTERISK-18232 #close
Reported by: Jacek Kowalski
Tested by: Alexander Traud
patches:
changes.patch submitted by Alessandro Crespi
Change-Id: If68eedbeff65bd1c1d8a9ed921c02ba464b32dac
Users upgrading from asterisk 13.5 to a later version and who use
realtime with peers that have mailboxes were experiencing runaway
situations that manifested as a continuous stream of taskprocessor
congestion errors, memory leaks and an unresponsive chan_sip.
A related issue was that setting rtcachefriends=no NEVER worked in
asterisk 13 (since the move to stasis). In 13.5 and earlier, when a
peer tried to register, all of the stasis threads would block and
chan_sip would again become unresponsive. After 13.5, the runaway
would happen.
There were a number of causes...
* mwi_event_cb was (indirectly) calling build_peer even though calls to
mwi_event_cb are often caused by build_peer.
* In an effort to prevent chan_sip from being unloaded while messages
were still in flight, destroy_mailboxes was calling
stasis_unsubscribe_and_join but in some cases waited forever for the
final message.
* add_peer_mailboxes wasn't properly marking the existing mailboxes
on a peer as "keep" so build_peer would always delete them all.
* add_peer_mwi_subs was unsubscribing existing mailbox subscriptions
then just creating them again.
All of this was causing a flood of subscribes and unsubscribes on
multiple threads all for the same peer and mailbox.
Fixes...
* add_peer_mailboxes now marks mailboxes correctly and build_peer only
deletes the ones that really are no longer needed by the peer.
* add_peer_mwi_subs now only adds subscriptions marked as "new" instead
of unsubscribing and resubscribing everything. It also adds the peer
object's address to the mailbox instead of its name to the subscription
userdata so mwi_event_cb doesn't have to call build_peer.
With these changes, with rtcachefriends=yes (the most common setting),
there are no leaks, locks, loops or crashes at shutdown.
rtcachefriends=no still causes leaks but at least it doesn't lock, loop
or crash. Since making rtcachefriends=no work wasnt in scope for this
issue, further work will have to be deferred to a separate patch.
Side fixes...
* The ast_lock_track structure had a member named "thread" which gdb
doesn't like since it conflicts with it's "thread" command. That
member was renamed to "thread_id".
ASTERISK-25468 #close
Change-Id: I07519ef7f092629e1e844f855abd279d6475cdd0
Change-Id I1cd33453c77c56c8e1394cd60a6f17bb61c1d957 Enable Session-Timers for
SIP over TCP (and TLS) also disables SIP retransmits in chan_sip for non-UDP
connections, allowing the TCP layer to handle the retransmits. Unfortunately,
this caused sessions to be terminated with a retransmit timeout becasue it
stopped at the point of the first retrans call.
This patch waits for the 64*T1 timer to expire instead.
ASTERISK-19968
Change-Id: I844f26801aada10bc94e9bebe6e151f0a8443204
Previously, the Contact was stored only on initial INVITE and on any
18X and 200. That meant that after re-INVITEs from *us* the Contact
could get updated, but after re-INVITEs from the *peer*, it did not.
This changeset fixes this inconsistency, properly allowing target
refreshes through re-INVITES (RFC3261, 12.2).
If your strictrtp setting allows it, this change allows you to switch
the source IP of a connected/calling device mid-call with a simple
re-INVITE from the new IP.
ASTERISK-26358 #close
Change-Id: Ibb8512054ab27c8c3d2514022568fde943bf2435
In some scenarios dialog_initialize_rtp can be called multiple times on
the same dialog. This can cause RTP instances to be leaked along with
multiple file descriptors for each instance.
This change makes it so the existing RTP instances are destroyed and
not overwritten, stopping the memory leak.
ASTERISK-26272 #close
patches:
ASTERISK-26272-13.patch submitted by Corey Farrell (license 5909)
Change-Id: Id529de1184c68f2f4d254ab41a1f458dafdb5f73
Following the Encrypt-all-the-things paradigm:
The user enters his SIP-URI and password. Thanks to DNS-NAPTR, the phone
determines SIP-over-TLS as preferred transport. In SIP/SDP, the phone starts
the call with a crypto attribute, but not as RTP/sAVP but the RTP/AVP profile
(sRTP is preferred aka optional; not mandatory). If the VoIP server does not
support sRTP and TLS, the phone shows an open padlock icon.
This paradigm is supported by several VoIP/SIP clients on default. Some
implementations even cannot be changed to RTP/sAVP. Therefore here, this
change allows Preferred sRTP for ingress. For egress, please, create a dial
plan which starts with RTP/SAVP, and when rejected tries again with RTP/AVP.
ASTERISK-20234 #close
Reported by: tootai
Tested by: tootai, Alexander Traud
patches:
srtp_patches.diff submitted by Matt Jordan
Change-Id: I42cb779df3a9c7b3dd03a629fb3a296aa4ceb0fd
Certain SNOM phones send so-called "optional crypto" in their SDP body.
Regular SRTP setup looks like this:
m=audio 64620 RTP/SAVP 8 0 9 99 3 18 4 101
a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...
SNOM-style "optional crypto" looks like this:
m=audio 61438 RTP/AVP 8 0 9 99 3 18 4 101
a=crypto:1 AES_CM_128_HMAC_SHA1_32 inline:...
A crypto line is supplied, but the m-line does not have SAVP.
When res_srtp.so is *not* loaded, then chan_sip.so treats the optional
crypto as regular RTP, but when res_srtp.so *is* loaded, it refuses the
incoming call with the following message:
WARNING: process_sdp: Failed to receive SDP offer/answer with
required SRTP crypto attributes for audio
For platforms that want to start providing SRTP this presents a
compatibility problem.
This changeset lets chan_sip handle the SDP as if no crypto-line was
supplied: i.e. accept the call as regular RTP, just like it did before
res_srtp was loaded.
Now you'll get this informative warning instead:
WARNING: Ignoring crypto attribute in SDP because RTP transport is
insecure
ASTERISK-23989 #close
Reported by: Olle Johansson
Change-Id: I91a15ae05a0296e398d6b65f53bb11afde1d80e2
Historically, Asterisk has always specified annexb=no for the g729 format.
However, when using res_pjsip no format attribute was specified. This patch
makes it so the SDP now contains a format attribute line with annexb=no.
Note, that this means only g729a is negotiated. Even for pass through support.
According to rfc7261 the type of annex used (a or b) is dependent upon the
answerer. However, Asterisk being a back to back user agent makes this tricky
to support at this time, thus we only allow annex 'a' for now.
ASTERISK-26228 #close
patches:
res_format_attr_g729.c submitted by Jason Parker (license 4993)
Change-Id: I76bc20cc0a01af01536e9915afef319c269c22d0
This updates func_channel.c and main/message.c to use a generic xpointer
include instead of including info from each channel driver. Now the
name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in
documentation for func_channel. Setting the name attribute of info to
MessageToInfo or MessageFromInfo causes it to be included in the
MessageSend application and AMI action.
Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea
Packets are read regulary, when there is no data in buffer fr->frametype
is AST_FRAME_NULL. There was no check of frametype and lastrtprx always
updated and, therefore, rtptimeout did not work at all.
ASTERISK-25270 #close
Change-Id: If3b5ca0dbb822582a86eb7d01dcae4e83448c41d
Asterisk defaults to timers=accept/refresher=uas. In that scenario, only in that
scenario, Sessions-Timers (RFC 4028) had no effect via TCP. This change enables
Session-Timers for SIP over TCP (and for SIP over TLS).
However with longer international calls via TCP, the SIP channel might break,
because all hops on the Internet route must stay online (have not a single power
outage, for example). Therefore with Session-Timers enabled (which are enabled
at default), you might see dropped calls. Consequently even with this change,
you might be better-off going for session-timers=refuse in your sip.conf.
ASTERISK-19968 #close
Change-Id: I1cd33453c77c56c8e1394cd60a6f17bb61c1d957
