Fixes#221
UserNote: res_pjsip now allows TLS v1.3 to be enabled if supported by
the underlying PJSIP library. The bundled version of PJSIP supports
TLS v1.3.
The ast_app_getdata() and ast_app_getdata_terminator() declarations
in app.h were changed recently to return enum ast_getdata_result
(which is how they were defined in app.c). The existing
declaration of ast_getdata_result in app.h was about 1000 lines
after those functions however so under certain circumstances,
a "use before declaration" error was thrown by the compiler.
The declaration of the enum was therefore moved to before those
functions.
Resolves: #200
Added two new functions (ast_sip_session_get_dialog and
ast_sip_session_get_pjsip_inv_state) that retrieve the dialog and the
pjsip_inv_state respectively from the pjsip_inv_session on the
ast_sip_session struct. This is due to pjproject adding a new field to
the pjsip_inv_session struct that caused crashes when trying to access
fields that were no longer where they were expected to be if a module
was compiled against a different version of pjproject.
Resolves: #145
These were uncovered when trying to run `bootstrap.sh` with Autoconf
2.71:
* AC_CONFIG_HEADER() is deprecated in favor of AC_CONFIG_HEADERS().
* AC_HEADER_TIME is obsolete.
* $as_echo is deprecated in favor of AS_ECHO() which requires an update
to ax_pthread.m4.
Note that the generated artifacts in this commit are from Autoconf 2.69.
Resolves#139
* gcc 13 is now catching when a function is declared as returning
an enum but defined as returning an int or vice versa. Fixed
a few in app.h, loader.c, stasis_message.c.
* gcc 13 is also now (incorrectly) complaining of dangling pointers
when assigning a pointer to a local char array to a char *. Had
to change that to an ast_alloca.
Resolves: #155
The Caller ID generation routine currently is hardcoded
to always use the system time zone. This makes it possible
to optionally specify any TZ-format time zone.
Resolves: #98
ASTERISK-30330
With this change, session modifications in the early media state are
possible if the SDP was sent reliably and confirmed by a PRACK. For
details, see RFC 6337, escpecially section 3.2.
Resolves: #73
The existing res_pjsip_pubsub APIs are somewhat limited in
what they can do. This adds a few API extensions that make
it possible for PJSIP pubsub modules to implement richer
features than is currently possible.
* Allow pubsub modules to get a handle to pjsip_rx_data on subscription
* Allow pubsub modules to run a callback when a subscription is renewed
* Allow pubsub modules to run a callback for outgoing NOTIFYs, with
a handle to the tdata, so that modules can append their own headers
to the NOTIFYs
This change does not add any features directly, but makes possible
several new features that will be added in future changes.
Resolves: #81
ASTERISK-30485 #close
Master-Only: True
Deprecate `ast_gethostbyname()` in favor of `ast_sockaddr_resolve()` and
`ast_sockaddr_resolve_first_af()`. `ast_gethostbyname()` has not been
used by any in-tree code since 2021.
This function will be removed entirely in Asterisk 23.
Resolves: #78
UpgradeNote: ast_gethostbyname() has been deprecated and will be removed
in Asterisk 23. New code should use `ast_sockaddr_resolve()` and
`ast_sockaddr_resolve_first_af()`.
The current AST_CEL_LOCAL_OPTIMIZE event is and has been
triggered on a local optimization end to serve as a flag
indicating the event occurred. This change adds a second
AST_CEL_LOCAL_OPTIMIZE_BEGIN event for further detail.
Resolves: #52
UpgradeNote: The existing AST_CEL_LOCAL_OPTIMIZE can continue
to be used as-is and the AST_CEL_LOCAL_OPTIMIZE_BEGIN event
can be ignored if desired.
UserNote: The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
When using mediasec, requests sent after a 401 must still contain the
Security-Client header according to
draft-dawes-sipcore-mediasec-parameter.
Resolves: #48
The current STIR/SHAKEN signing process is inconsistent with the
RFCs in a couple ways that can cause interoperability issues.
RFC8225 specifies that the keys must be ordered lexicographically, but
currently the fields are simply ordered according to the order
in which they were added to the JSON object, which is not
compliant with the RFC and can cause issues with some carriers.
To fix this, we now leverage libjansson's ability to dump a JSON
object sorted by key value, yielding the correct field ordering.
Additionally, telephone numbers must have any leading + prefix removed
and must not contain characters outside of 0-9, *, and # in order
to comply with the RFCs. Numbers are now properly formatted as such.
ASTERISK-30407 #close
Change-Id: Iab76d39447c4b8cf133de85657dba02fda07f9a2
Adds PJSIP as a supported technology to DUNDi.
To facilitate this, we now allow an endpoint to be specified
for outgoing PJSIP calls. We also allow users to force a specific
channel technology for outgoing SIP-protocol calls.
ASTERISK-28109 #close
ASTERISK-28233 #close
Change-Id: I2e28e5a5d007bd49e3df113ad567b011103899bf
While it is possible to create multiple mixmonitor instances
on a channel, it was not previously possible to mute individual
instances.
This change includes the ability to specify the MixMonitorID
when calling the manager action: MixMonitorMute. This will
allow an individual MixMonitor instance to be muted via id.
This id can be stored as a channel variable using the 'i'
MixMonitor option.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor spy-type audiohooks on the channel.
This is done via the new audiohook function:
ast_audiohook_set_mute_all.
ASTERISK-30464
Change-Id: Ibba8c7e750577aa1595a24b23316ef445245be98
* Added a new function ast_utf8_replace_invalid_chars() to
utf8.c that copies a string replacing any invalid UTF-8
sequences with the Unicode specified U+FFFD replacement
character. For example: "abc\xffdef" becomes "abc\uFFFDdef".
Any UTF-8 compliant implementation will show that character
as a � character.
* Updated res_pjsip:set_id_from_hdr() to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
* Updated stasis_channels:ast_channel_publish_varset to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
ASTERISK-27830
Change-Id: I4ffbdb19c80bf0efc675d40078a3ca4f85c567d8
Removed multiple patches.
Code chages in res_pjsip_pubsub due to changes in evsub.
Pjsip now calls on_evsub_state() before on_rx_refresh(),
so the sub tree deletion that used to take place in
on_evsub_state() now must take place in on_rx_refresh().
Additionally, pjsip now requires that you send the NOTIFY
from within on_rx_refresh(), otherwise it will assert
when going to send the 200 OK. The idea is that it will
look for this NOTIFY and cache it until after sending the
response in order to deal with the self-imposed message
mis-order. Asterisk previously dealt with this by pushing
the NOTIFY in on_rx_refresh(), but pjsip now forces us
to use it's method.
Changes were required to configure in order to detect
which way pjsip handles this as the two are not
compatible for the reasons mentioned above.
A corresponding change in testsuite is required in order
to deal with the small interal timing changes caused by
moving the NOTIFY send.
ASTERISK-30325
Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f
Adds the overlap_context option, which can be used
to explicitly specify a context to use for overlap
dialing extension matches, rather than forcibly
using the context configured for the endpoint.
ASTERISK-30262 #close
Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db
For most modules that interacted with app_macro, this change is limited
to no longer looking for the current context from the macrocontext when
set. Additionally, the following modules are impacted:
app_dial - no longer supports M^ connected/redirecting macro
app_minivm - samples written using macro will no longer work.
The sample needs a re-write
app_queue - can no longer a macro on the called party's channel.
Use gosub which is currently supported
ccss - no callback macro, gosub only
app_voicemail - no macro support
channel - remove macrocontext and priority, no connected line or
redirection macro options
options - stdexten is deprecated to gosub as the default and only
pbx - removed macrolock
pbx_dundi - no longer look for macro
snmp - removed macro context, exten, and priority
ASTERISK-30304
Change-Id: I830daab293117179b8d61bd4df0d971a1b3d07f6
Add ability to set HANGUPCAUSE when SIP causecode received in BYE (in addition to currently supported Q.850).
ASTERISK-30319 #close
Change-Id: I3f55622dc680ce713a2ffb5a458ef5dd39fcf645
-----------------
This commit reinstates MES with some casting fixes to the
functions in time.h that convert between doubles and timeval
structures. The casting issues were causing incorrect
timestamps to be calculated which caused transcoding from/to
G722 to produce bad or no audio.
ASTERISK-30391
-----------------
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038
json.h contains macros to get a string and an integer
from a JSON object. However, the macro to do this for
JSON reals is missing. This adds that.
ASTERISK-30361 #close
Change-Id: I8d0e28d763febf27b05801cdc83b73282aa6ee7a
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
ASTERISK-30280
Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a
Currently, there is no Caller ID available to us when
checking for an extension match when handling INVITEs.
As a result, extension patterns that depend on the Caller ID
are not matched and calls may be incorrectly rejected.
The Caller ID is not available because the supplement that
adds Caller ID to the session does not execute until after
this check. Supplement callbacks cannot yet be executed
at this point since the session is not yet in the appropriate
state.
To fix this without impacting existing behavior, the Caller ID
number is now retrieved before attempting to pattern match.
This ensures pattern matching works correctly and there is
no behavior change to the way supplements are called.
ASTERISK-28767 #close
Change-Id: Iec7f5a3b90e51b65ccf74342f96bf80314b7cfc7
When ast_stream_and_wait returns an error (for example, when attempting
to stream to a channel after hangup) the stream is not closed, and
callers typically do not check the return code. This results in leaking
file descriptors, leading to resource exhaustion.
This change ensures that the stream is closed in case of error.
ASTERISK-30198 #close
Reported-by: Julien Alie
Change-Id: Ie46b67314590ad75154595a3d34d461060b2e803
chan_sip supported sending AOC-D and AOC-E information in SIP INFO
messages in an "AOC" header in a format that was originally defined by
Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC
format that is supported by devices from multiple vendors, including
Snom phones with firmware >= 8.4.2 (released in 2010).
This commit adds a new res_pjsip_aoc module that inserts AOC information
into outgoing messages or sends SIP INFO messages as described below.
It also fixes a small issue in res_pjsip_session which didn't always
call session supplements on outgoing_response.
* AOC-S in the 180/183/200 responses to an INVITE request
* AOC-S in SIP INFO (if a 200 response has already been sent or if the
INVITE was sent by Asterisk)
* AOC-D in SIP INFO
* AOC-D in the 200 response to a BYE request (if the client hangs up)
* AOC-D in a BYE request (if Asterisk hangs up)
* AOC-E in the 200 response to a BYE request (if the client hangs up)
* AOC-E in a BYE request (if Asterisk hangs up)
The specification defines one more, AOC-S in an INVITE request, which
is not implemented here because it is not currently possible in
Asterisk to have AOC data ready at this point in call setup. Once
specifying AOC-S via the dialplan or passing it through from another
SIP channel's INVITE is possible, that might be added.
The SIP INFO requests are sent out immediately when the AOC indication
is received. The others are inserted into an appropriate outgoing
message whenever that is ready to be sent. In the latter case, the XML
is stored in a channel variable at the time the AOC indication is
received. Depending on where the AOC indications are coming from (e.g.
PRI or AMI), it may not always be possible to guarantee that the AOC-E
is available in time for the BYE.
Successfully tested AOC-D and both variants of AOC-E with a Snom D735
running firmware 10.1.127.10. It does not appear to properly support
AOC-S however, so that could only be tested by inspecting SIP traces.
ASTERISK-21502 #close
Reported-by: Matt Jordan <mjordan@digium.com>
Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333
This file includes some doxygen comments referencing
ast_format_set. This is an obsolete API that was
removed years back, but documentation was not fully
updated to reflect that. These examples are
updated to the current way of doing things
(using the format cache).
ASTERISK-30327 #close
Change-Id: I570f3b8007fa17ba470cc7117f44bfe7c555d2f7
Add live_dangerously flag to manager and use this flag to
determine if a configuation file outside of AST_CONFIG_DIR
should be read.
ASTERISK-30176
Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404
(cherry picked from commit 81f10e847e)
It was possible for a module that registered for transport monitor
events to pass in a pjsip_transport that had already been freed.
This caused pjsip_transport_events to crash when looking up the
monitor for the transport. The fix is a two pronged approach.
1. We now increment the reference count on pjsip_transports when we
create monitors for them, then decrement the count when the
transport is going to be destroyed.
2. There are now APIs to register and unregister monitor callbacks
by "transport key" which is a string concatenation of the remote ip
address and port. This way the module needing to monitor the
transport doesn't have to hold on to the transport object itself to
unregister. It just has to save the transport_key.
* Added the pjsip_transport reference increment and decrement.
* Changed the internal transport monitor container key from the
transport->obj_name (which may not be unique anyway) to the
transport_key.
* Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that
fills a buffer with the transport_key using a passed-in
pjsip_transport.
* Added the following functions:
ast_sip_transport_monitor_register_key
ast_sip_transport_monitor_register_replace_key
ast_sip_transport_monitor_unregister_key
and marked their non-key counterparts as deprecated.
* Updated res_pjsip_pubsub and res_pjsip_outbound_register to use
the new "key" monitor functions.
NOTE: res_pjsip_registrar also uses the transport monitor
functionality but doesn't have a persistent object other than
contact to store a transport key. At this time, it continues to
use the non-key monitor functions.
ASTERISK-30244
Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b
(cherry picked from commit 7684c9e907)
If multiple codecs are available for the same
resource and the translation costs between
multiple codecs are the same, ties are
currently broken arbitrarily, which means a
lower quality codec would be used. This forces
Asterisk to explicitly use the higher quality
codec, ceteris paribus.
ASTERISK-29455
Change-Id: I4b7297e1baca7aac14fe4a3c7538e18e2dbe9fd6
Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
Add enum to allow setting optional direction. If set to only one
direction, only feed matching-direction frames to the associated
slin factory.
This prevents mangling the transcoder on non-mixed frames when the
READ and WRITE frames would have otherwise required it. Also
removes the need to mute or discard the un-wanted frames as they
are no longer added in the first place.
res_stasis_snoop is changed to use this addition to set direction
on audiohook based on spy direction.
If no direction is set, the ast_audiohook_init will init this enum
to BOTH which maintains existing functionality.
ASTERISK-30252
Change-Id: If8716bad334562a5d812be4eeb2a92e4f3be28eb
Allows bridging, parking, and dial messages to be globally
ignored for all CDRs such that only a single CDR record
is generated per channel.
This is useful when CDRs should endure for the lifetime of
an entire channel and bridging and dial updates in the
dialplan should not result in multiple CDR records being
created for the call. With the ignore bridging option,
bridging changes have no impact on the channel's CDRs.
With the ignore dial state option, multiple Dials and their
outcomes have no impact on the channel's CDRs. The
last disposition on the channel is preserved in the CDR,
so the actual disposition of the call remains available.
These two options can reduce the amount of "CDR hacks" that
have hitherto been necessary to ensure that CDR was not
"spoiled" by these messages if that was undesired, such as
putting a dummy optimization-disabled local channel between
the caller and the actual call and putting the CDR on the channel
in the middle to ensure that CDR would persist for the entire
call and properly record start, answer, and end times.
Enabling these options is desirable when calls correspond
to the entire lifetime of channels and the CDR should
reflect that.
Current default behavior remains unchanged.
ASTERISK-30091 #close
Change-Id: I393981af42732ec5ac3ff9266444abb453b7c832
This patch adds support for mediasec SIP headers and SDP attributes.
These are defined in RFC 3329, 3GPP TS 24.229 and
draft-dawes-sipcore-mediasec-parameter. The new features are
implemented so that a backbone for RFC 3329 is present to streamline
future work on RFC 3329.
With this patch, Asterisk can communicate with Deutsche Telekom trunks
which require these fields.
ASTERISK-30032
Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2
This patch adds a new option to the 100rel parameter for pjsip
endpoints called "peer_supported". When an endpoint with this option
receives an incoming request and the request indicated support for the
100rel extension, then Asterisk will send 1xx responses reliably. If
the request did not indicate 100rel support, Asterisk sends 1xx
responses normally.
ASTERISK-30158
Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad
Fixed a segfault caused by var_list_from_loc_info() encountering
an empty location info element.
Fixed an issue in ast_strsep() where a value with only whitespace
wasn't being preserved.
Fixed an issue in ast_variable_list_from_quoted_string() where
an empty value was considered a failure.
ASTERISK-30215
Reported by: Dan Cropp
Change-Id: Ieca64e061a6d9298f0196c694b60d986ef82613a
This change allows TEL URI requests to come through for basic calls. The
allowed requests are INVITE, ACK, BYE, and CANCEL. The From and To
headers will now allow TEL URIs, as well as the request URI.
Support is only for TEL URIs present in traffic from a remote party.
Asterisk does not generate any TEL URIs on its own.
ASTERISK-26894
Change-Id: If5729e6cd583be7acf666373bf9f1b9d653ec29a
We're validating the following functionality:
encrypting a block of data with RSA
decrypting a block of data with RSA
signing a block of data with RSA
verifying a signature with RSA
encrypting a block of data with AES-ECB
encrypting a block of data with AES-ECB
as well as accessing test keys from the keystore.
ASTERISK-30045 #close
Change-Id: I0d10e7b41009c5290a4356c6480e636712d5c96d
