Playing back a file to a channel in an ARI bridge would attempt to wait until
the playback concluded before returning. The method used involved signaling the
waiting thread in the ARI custom playback function.
The problem with this is that there were some corner cases that were not accounted for:
* If a bridge channel could not be found, then we never would attempt the playback but
would still attempt to wait for the playback to complete.
* If the bridge playfile action failed to queue, we would still attempt to wait for the
playback to complete.
* If the bridge playfile action were queued but some circumstance caused the playback
not to occur (the bridge dies, the channel is removed from the bridge), then we would
never be notified.
The solution to this is to move the waiting logic into the bridge code. A new bridge
API function is added to queue a synchronous action on a bridge. The waiting thread
is notified when the queued frame has been freed, either due to an error occurring
or due to successful playback. As a failsafe, the waiting thread has a 10 minute
timeout just in case there is a frame leak somewhere.
Review: https://reviewboard.asterisk.org/r/3338
........
Merged revisions 410673 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410684 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the 'pjsip show channel' and 'pjsip show contact' commands.
Refactored out the hated ast_hashtab. Replaced with ao2_container.
Cleaned up function naming. Internal only, no public name changes.
Cleaned up whitespace and brace formatting in cli code.
Changed some NULL checking from "if"s to ast_asserts.
Fixed some register/unregister ordering to reduce deadlock potential.
Fixed ast_sip_location_add_contact where the 'name' buffer was too short.
Fixed some self-assignment issues in res_pjsip_outbound_registration.
(closes issue ASTERISK-23276)
Review: http://reviewboard.asterisk.org/r/3283/
........
Merged revisions 410287 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410288 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In order to prevent confusion over the allow and disallow
list of codecs being the same an option for registering a
field as an alias is added. The alias field will be read
from the configuration file, but afterwards is not listed
as a known field. With disallow set as an alias, the CLI
command pjsip show endpoint # will list the allow= field,
but not the disallow field.
(closes issue ASTERISK-23092)
Review: https://reviewboard.asterisk.org/r/3193/
........
Merged revisions 410190 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410191 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch creates the AST_SORCERY dialplan function which allows someone to
retrieve any value from a sorcery-based config file. It's similar to
AST_CONFIG.
The creation of the function itself was fairly straightforward but it required
changes to the underlying sorcery infrastructure that rippled into individual
sorcery objects. The changes stemmed from inconsistencies in how sorcery
created ast_variable objectsets from sorcery objects and the inconsistency
in how individual objects used that feature especially when it came to
parameters that can be specified multiple times like contact in aor and match
in identify. You can read more here...
http://lists.digium.com/pipermail/asterisk-dev/2014-February/065202.html
So, what this patch does, besides actually creating the AST_SORCERY function,
is the following...
* Creates ast_variable_list_append which is a helper to append one ast_variable
list to another.
* Modifies the ast_sorcery_object_field_register functions to accept the
already-defined sorcery_fields_handler callback.
* Modifies ast_sorcery_objectset_create to accept a parameter indicating return
type preference...a single ast_variable with all values concatenated or an
ast_variable list with multiple entries. Also fixed a few bugs.
* Modifies individual sorcery object implementations to use the new function
definition of the ast_sorcery_object_field_register functions.
* Modifies location.c and res_pjsip_endpoint_identifier_ip.c to implement
sorcery_fields_handler handlers so they return multiple occurrences as an
ast_variable_list.
* Added a whole bunch of tests to test_sorcery.
(closes issue ASTERISK-22537)
Review: http://reviewboard.asterisk.org/r/3254/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Transport TOS values were interpreted as DSCP values without being documented
as such. Endpoint TOS values (tos_audio/tos_video) behaved normally as TOS
values have historically. This patch makes the transport TOS values behave as
TOS values and makes all TOS values readable as string values (e.g. AF11).
In addition, alembic scripts have been updated to use the proper field types
for all TOS/COS values.
(issue ASTERISK-23235)
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3304/
........
Merged revisions 410028 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410029 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Adds identify, transport, and registration support to the PJSIP CLI.
* Creates three additional callbacks, one for an iterator, one for a
comparator, and one for a container. This eliminates the link dependency
from higher level modules to lower level ones.
* Eliminates duplicate sorting in PJSIP CLI commands.
* Cleans up PJSIP CLI output formatting.
* Pushes CLI command registration down to the implementing source file.
* Adds several ast_sip_destroy_sorcery functions to complement existing
ast_sip_sorcery_initialize functions. The destroy functions unregister
PJSIP CLI commands and PJSIP CLI formatters.
Reported by: George Joseph
Review: https://reviewboard.asterisk.org/r/3104/
........
Merged revisions 407568 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@407573 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Implements the following cli commands:
pjsip list aors
pjsip list auths
pjsip list channels
pjsip list contacts
pjsip list endpoints
pjsip show aor(s)
pjsip show auth(s)
pjsip show channels
pjsip show endpoint(s)
Also...
Minor modifications made to the AMI command implementations to facilitate
reuse.
New function ast_variable_list_sort added to config.c and config.h to implement
variable list sorting.
(issue ASTERISK-22610)
patches:
pjsip_cli_v2.patch uploaded by george.joseph (License 6322)
........
Merged revisions 404480 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404507 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In some cases messages need to be sent to a direct URI (sip:<ip address>). This
patch adds in that support by using a default outbound endpoint. When sending
messages, if no endpoint can be found then the default one is used.
To facilitate this a new default_outbound_endpoint option was added to the
globals section for pjsip.conf.
Review: https://reviewboard.asterisk.org/r/2944/
........
Merged revisions 403680 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403687 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Make ast_sorcery_observer_remove() accept a const callbacks struct.
* Make ast_sorcery_observer_remove() tolerant of the sorcery parameter
being NULL. Now it can be called within a module unload routine if the
sorcery initialization fails.
* Fix ast_sorcery_observer_add() to fail if the container link fails.
........
Merged revisions 403324 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403327 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Certain options available that specify a SIP URI perform validation
on the provided URI using the PJSIP URI parser. This operation
requires that the thread executing it be registered with the PJLIB
library. During reloads this was done on a thread which was NOT
registered with it.
This fixes the problem by creating a task which reloads the
configuration on a PJSIP thread.
(closes issue ASTERISK-22923)
Reported by: Anthony Messina
........
Merged revisions 403179 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403180 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Some options (such as call_group and pickup_group) share the same configuration
handler and decide what logic to use based on the name of the option. These
handlers were not updated to check for the new option names and were treating
the options as invalid.
This change simply updates the handlers with the proper names of the options.
(closes issue ASTERISK-22922)
Reported by: Anthony Messina
........
Merged revisions 403173 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403174 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This change fixes two issues when setting an outbound proxy:
1. The outbound proxy URI was not parsed and validated during configuration.
2. If an outgoing dialog was created and the outbound proxy could not be set an assertion would
occur because the usage count on the dialog was not decremented.
The documentation has also been updated to specify that a full URI must be specified for
the outbound proxy.
(closes issue ASTERISK-22672)
Reported by: Antti Yrjola
........
Merged revisions 400824 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400825 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Channel snapshots have string representations of the channel's native formats.
Prior to this change, the format strings were re-created on ever channel snapshot
creation. Since channel native formats rarely change, this was very wasteful.
Now, string representations of formats may optionally be stored on the ast_format_cap
for cases where string representations may be requested frequently. When formats
are altered, the string cache is marked as invalid. When strings are requested, the
cache validity is checked. If the cache is valid, then the cached strings are copied.
If the cache is invalid, then the string cache is rebuilt and copied, and the cache
is marked as being valid again.
Review: https://reviewboard.asterisk.org/r/2879
........
Merged revisions 400356 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400363 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The endpoint option does not apply to communication with external entities. Rather,
the option is applied to all communications with the endpoint. The external_media_address
transport configuration option may override the endpoint option if it turns out that
we are going to be communicating with an external entity.
Two things of note:
1) I have not updated the XML documentation. This is being taken care of by Rusty as part
of his work on issue ASTERISK-22405
2) This commit is likely to cause testsuite failures since there are tests that use the
external_media_address endpoint option, and they will need to be changed over. Well, I'm
planning to get that updated ASAP after this commit.
(closes issue ASTERISK-22528)
reported by Rusty Newton
........
Merged revisions 399283 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399284 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The rtpengine configuration parameter was documented in the XML documentation,
but it was not actually registered with the sorcery object. This adds the
parameter with a default of "asterisk", such that res_rtp_asterisk is chosen as
the default RTP implementation.
(closes issue ASTERISK-22380)
Reported by: Rusty Newton
Tested by: Rusty Newton
........
Merged revisions 397621 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397622 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are times when a configuration option should not have documentation.
1. Some options are registered with a particular object merely as a warning to
users. These options aren't even really 'deprecated' - which has its own
separate API call - they are actually provided by a different configuration
file. The options are merely registered so that the user gets a warning that
a different configuration file provides the item.
2. Some object types - most notably some used by modules that use sorcery - are
completely internal and should never be shown to the user.
3. Sorcery itself has several 'hidden' fields that should never be shown to a
user.
This patch updates the configuration framework and sorcery with additional API
calls that allow a module to register types as internal and options as not
requiring documentation. This bypasses the XML documentation checking.
This patch also re-enables the strict XML documentation checking in trunk, as
well as updates some documentation that was missing.
Review: https://reviewboard.asterisk.org/r/2785/
(closes issue ASTERISK-22359)
Reported by: Matt Jordan
(closes issue ASTERISK-22112)
Reported by: Rusty Newton
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397524 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This is more-or-less a reversion of previous ACL behavior so that
it is more self-contained. ACL sections are now only parsed if res_pjsip_acl.so
is loaded. Moreover, the configuration section is now "type=acl" instead of
"type=security".
The original reason for having ACLs configured in a "type=security" section
was to lump ACLs and other security-related items into the same section. The
problem is that ACLs really should be in their own sections and there are
no other security-related options implemented anyways.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397193 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
