Since DETECT_DEADLOCKS is now split from DEBUG_THREADS, it must
always be included in buildopts.h instead of only when
ADD_CFLAGS_TO_BUILDOPTS_H is defined. A SEGV will result otherwise.
Resolves: #719
(cherry picked from commit 558d0a8033)
rtp_engine.c and stun.c were calling ast_register_cleanup which
is skipped if any loadable module can't be cleanly unloaded
when asterisk shuts down. Since this will always be the case,
their cleanup functions never get run. In a practical sense
this makes no difference since asterisk is shutting down but if
you're in development mode and trying to use the leak sanitizer,
the leaks from both of those modules clutter up the output.
(cherry picked from commit 00940e2abd)
There were a few references in the embedded documentation XML
where the case didn't match or where the referenced app or function
simply didn't exist any more. These were causing 404 responses
in docs.asterisk.org.
(cherry picked from commit 0e0a56a0ca)
When using COMPILE_DOUBLE, dialplan_functions.xml is mistaken
for the source for an embedded XML document and gets compiled
to dialplan_functions.o. This causes dialplan_functions.c to
be ignored making its functions unavailable and causing chan_pjsip
to fail to load.
There is work going on to update our OpenSSL usage to avoid the
deprecated functions but in the meantime make it possible to compile
in devmode.
Change-Id: Ib082eb8b3751f0185d8aa8fe127da664c93f0726
Adds the 'D' option to app chanspy that causes the input and output
frames of the spied channel to be interleaved in the spy output frame.
This allows the input and output of the spied channel to be decoded
separately by the receiver.
If the 'o' option is also set, the 'D' option is ignored as the
audio being spied is inherently one direction.
Fixes: #569
UserNote: The ChanSpy application now accepts the 'D' option which
will interleave the spied audio within the outgoing frames. The
purpose of this is to allow the audio to be read as a Dual channel
stream with separate incoming and outgoing audio. Setting both the
'o' option and the 'D' option and results in the 'D' option being
ignored.
(cherry picked from commit e0be8be337)
Need to update the github-script to v7 to squash deprecation
warnings.
Also fixed the API name for github.rest.pulls.requestReviewers.
(cherry picked from commit be9b5bf0a9)
Commit 424be34563 introduced
a regression by calling ast_free on memory allocated by
realpath. This causes Asterisk to abort when executing this
function. Since the memory is allocated by glibc, it should
be freed using ast_std_free.
Resolves: #513
(cherry picked from commit 3ff081e581)
See UserNote below.
Exposed the existing Hangup AMI action in manager.c so we can use
all of it's channel search and AMI protocol handling without
duplicating that code in dialplan_functions.c.
Added a lookup function to res_pjsip.c that takes in the
string represenation of the pjsip_status_code enum and returns
the actual status code. I.E. ast_sip_str2rc("DECLINE") returns
603. This allows the caller to specify PJSIPHangup(decline) in
the dialplan, just like Hangup(call_rejected).
Also extracted the XML documentation to its own file since it was
almost as large as the code itself.
UserNote: A new dialplan app PJSIPHangup and AMI action allows you
to hang up an unanswered incoming PJSIP call with a specific SIP
response code in the 400 -> 699 range.
(cherry picked from commit 8e012faf9e)
* Allow res_speech to translate the input channel if the
format is translatable to a format suppored by the
speech provider.
Resolves: #129
UserNote: res_speech now supports translation of an input channel
to a format supported by the speech provider, provided a translation
path is available between the source format and provider capabilites.
(cherry picked from commit db5767f19d)
The workflows that get triggered when PRs are submitted or updated
have been replaced with ones that are more secure and have
a higher level of parallelism.
(cherry picked from commit cd640dc67b)
The workflows that get triggered when PRs are submitted or updated
have been replaced with ones that are more secure and have
a higher level of parallelism.
(cherry picked from commit 5eb676bab5)
res_statsis's app loop sleeps for up to .2s waiting on input
to a channel before re-checking the command queue. This can
cause delays between channel setup and bridge.
This change is to send a SIGURG on the sleeping thread when
a new command is enqueued. This exits the sleeping thread out
of the ast_waitfor() call triggering the new command being
processed on the channel immediately.
Resolves: #362
UserNote: Call setup times should be significantly improved
when using ARI.
(cherry picked from commit 5342562892)
You can now define the _TRACE_PREFIX_ macro to change the
default trace line prefix of "file:line function" to
something else. Full documentation in logger.h.
(cherry picked from commit 20b06e7bb5)
The current STIR/SHAKEN implementation is not currently usable due
to encryption issues. Rather than trying to futz with OpenSSL and
the the current code, we can take advantage of the existing
capabilities of libjwt but we first need to add it to the
third-party infrastructure already in place for jansson and
pjproject.
A few tweaks were also made to the third-party infrastructure as
a whole. The jansson "dest" install directory was renamed "dist"
to better match convention, and the third-party Makefile was updated
to clean all product directories not just the ones currently in
use.
Resolves: #349
(cherry picked from commit 733ab35848)
The documentation on qualify_timeout does not explicitly state that the timeout
includes any time required to perform any needed DNS queries on the endpoint.
If the OPTIONS response is delayed due to the DNS query, it can still render an
endpoint as Unreachable if the net time is enough for qualify_timeout to expire.
Resolves: #352
(cherry picked from commit 7369de127a)
Previously, DETECT_DEADLOCKS depended on DEBUG_THREADS.
Unfortunately, DEBUG_THREADS adds a lot of lock tracking overhead
to all of the lock lifecycle calls whereas DETECT_DEADLOCKS just
causes the lock calls to loop over trylock in 200us intervals until
the lock is obtained and spits out log messages if it takes more
than 5 seconds. From a code perspective, the only reason they were
tied together was for logging. So... The ifdefs in lock.c were
refactored to allow DETECT_DEADLOCKS to be enabled without
also enabling DEBUG_THREADS.
Resolves: #321
UserNote: You no longer need to select DEBUG_THREADS to use
DETECT_DEADLOCKS. This removes a significant amount of overhead
if you just want to detect possible deadlocks vs needing full
lock tracing.
(cherry picked from commit 04183eb246)
Add a wrapper function around ast_cel_publish_event that
packs event and extras into a blob before publishing
Resolves:#330
(cherry picked from commit 5c58a6fd56)
To better co-exist with sounds files that may be managed by
packages, custom sound files may now be placed in
AST_DATA_DIR/sounds/custom instead of the standard
AST_DATA_DIR/sounds/<lang> directory. If the new
"sounds_search_custom_dir" option in asterisk.conf is set
to "true", asterisk will search the custom directory for sounds
files before searching the standard directory. For performance
reasons, the "sounds_search_custom_dir" defaults to "false".
Resolves: #315
UserNote: A new option "sounds_search_custom_dir" has been added to
asterisk.conf that allows asterisk to search
AST_DATA_DIR/sounds/custom for sounds files before searching the
standard AST_DATA_DIR/sounds/<lang> directory.
(cherry picked from commit 7b42ebb90d)
The previous behavior of make_buildopts_h was to not add the
non-ABI-breaking MENUSELECT_CFLAGS like DETECT_DEADLOCKS,
REF_DEBUG, etc. to the buildopts.h file because "it caused
ccache to invalidate files and extended compile times". They're
only defined by passing them on the gcc command line with '-D'
options. In practice, including them in the include file rarely
causes any impact because the only time ccache cares is if you
actually change an option so the hit occurrs only once after
you change it.
OK so why would we want to include them? Many IDEs follow the
include files to resolve defines and if the options aren't in an
include file, it can cause the IDE to mark blocks of "ifdeffed"
code as unused when they're really not.
So...
* Added a new menuselect compile option ADD_CFLAGS_TO_BUILDOPTS_H
which tells make_buildopts_h to include the non-ABI-breaking
flags in buildopts.h as well as the ABI-breaking ones. The default
is disabled to preserve current behavior. As before though,
only the ABI-breaking flags appear in AST_BUILDOPTS and only
those are used to calculate AST_BUILDOPT_SUM.
A new AST_BUILDOPT_ALL define was created to capture all of the
flags.
* make_version_c was streamlined to use buildopts.h and also to
create asterisk_build_opts_all[] and ast_get_build_opts_all(void)
* "core show settings" now shows both AST_BUILDOPTS and
AST_BUILDOPTS_ALL.
UserNote: The "Build Options" entry in the "core show settings"
CLI command has been renamed to "ABI related Build Options" and
a new entry named "All Build Options" has been added that shows
both breaking and non-breaking options.
(cherry picked from commit 8d506370f5)
func_periodic_hook does not hangup after playback, relying on hangup
which keeps the channel alive longer than necessary.
Resolves: #325
(cherry picked from commit cf623753a9)
func_periodic_hook was truncating long channel names which
causes issues when you need to run other dialplan functions/apps
on the channel.
Resolves: #319
(cherry picked from commit 2e59f9fd6a)
If the safe_asterisk script detects that the /var/lib/asterisk
directory doesn't exist, it now creates it with 755 permissions
instead of 770. safe_asterisk needing to create that directory
should be extremely rare though because it's normally created
by 'make install' which already sets the permissions to 755.
Resolves: #316
(cherry picked from commit 4e43b9d308)
Using the Set dialplan application does not actually
delete channel or global variables. Instead the
variables are set to an empty value.
This change adds two dialplan functions,
GLOBAL_DELETE and DELETE which can be used to
delete global and channel variables instead
of just setting them to empty.
There is also no ability within the dialplan to
determine if a global or channel variable has
actually been set or not.
This change also adds two dialplan functions,
GLOBAL_EXISTS and VARIABLE_EXISTS which can be
used to determine if a global or channel variable
has been set or not.
Resolves: #289
UserNote: Four new dialplan functions have been added.
GLOBAL_DELETE and DELETE have been added which allows
the deletion of global and channel variables.
GLOBAL_EXISTS and VARIABLE_EXISTS have been added
which checks whether a global or channel variable has
been set.
(cherry picked from commit 405a08aaed)
All of the links that reference page anchors with capital letters in
the ids (#Something) have been changed to lower case to match the
anchors that are generated by mkdocs.
(cherry picked from commit e54d867f25)
The new documentation site uses traditional markdown instead
of the Confluence flavored version. This required changes in
the mustache templates and the python that generates the files.
(cherry picked from commit d2172582f7)
* Fixed issue with the script not parsing the new tag format for
certified releases. The format changed from certified/18.9-cert5
to certified-18.9-cert5.
* Fixed issue where the asterisk version wasn't being considered
when looking for cached versions.
Resolves: #263
(cherry picked from commit bebf843253)
Historically these were checked in for certified releases but
since the move to github and the unified release process,
they are no longer needed and cause issues.
(cherry picked from commit 87773dc11f)
