These are only a few of the leaks. The large number of macros
and return paths in this file would make a weeks worth of work
to plug them all.
Change-Id: Ie2369fa944023d44767871c5c30974cb077ffb56
Replace usage of ao2_container_alloc with ao2_container_alloc_hash or
ao2_container_alloc_list.
ao2_container_alloc is now restricted to modules only and is being
removed from Asterisk 17.
Change-Id: I0907d78bc66efc775672df37c8faad00f2f6c088
CEL wrongly assumed that a channel would only have a single dial
event on it. This is incorrect. Particularly in a queue each
call attempt to a member will result in a dial event, adding
a new dial status in CEL without removing the old one. This
would cause the container to grow with only one dial status
being removed when the channel went away. The other dial status
entries would remain leaking memory.
This change fixes the memory leak by ensuring that only one dial
status will only ever exist for each channel.
The behavior during the scenario where multiple events are received
has also been improved. For failure cases the first failure will
be the dial status. If an answer dial status is received, though,
it will take priority and the dial status for the channel will be
answer.
Memory usage has also been decreased by storing the minimal
amount of information and the code has been cleaned up slightly.
ASTERISK-25262 #close
Change-Id: I5944eb923db17b6a0faa7317ff6abc9307c009fe
Analyzing the code shows that the unit test summary and description
strings should not end with a new-line character. Where these strings are
used in the code a new-line is provided for output.
Change-Id: I129284f5e7ca93d82532334076da4c462d3d9fba
When the publication of attended transfer messages were pushed to another
thread, some subtle race conditions were introduced with the CEL unit tests.
This patch fixes one of them, and pushes the other to ASTERISK-22367, which
already exists to fix another bouncy CEL unit test.
In particular, this patch fixes the test_cel_attended_transfer_bridges_link
test, and defers the test_cel_attended_transfer_bridges_swap test to the
aforementioned JIRA issue.
ASTERISK-22367
........
Merged revisions 428891 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@428892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
From reviewboard:
"During blind transfer testing, it was noticed that tests were failing
occasionally because the ARI blind transfer event was not being sent.
After investigating, I detected a race condition in the blind transfer
code. When blind transferring a single channel, the actual transfer
operation (i.e. removing the transferee from the bridge and directing
them to the proper dialplan location) is queued onto the transferee
bridge channel. After queuing the transfer operation, the blind transfer
Stasis message is published. At the time of publication, snapshots of
the channels and bridge involved are created. The ARI subscriber to the
blind transfer Stasis message then attempts to determine if the bridge
or any of the involved channels are subscribed to by ARI applications.
If so, then the blind transfer message is sent to the applications. The
way that the ARI blind transfer message handler works is to first see
if the transferer channel is subscribed to. If not, then iterate over
all the channel IDs in the bridge snapshot and determine if any of
those are subscribed to. In the test we were running, the lone
transferee channel was subscribed to, so an ARI event should have been
sent to our application. Occasionally, though, the bridge snapshot did
not have any channels IDs on it at all. Why?
The problem is that since the blind transfer operation is handled by a
separate thread, it is possible that the transfer will have completed and
the channels removed from the bridge before we publish the blind transfer
Stasis message. Since the blind transfer has completed, the bridge on
which the transfer occurred no longer has any channels on it, so the
resulting bridge snapshot has no channels on it. Through investigation of
the code, I found that attended transfers can have this issue too for the
case where a transferee is transferred to an application."
The fix employed here is to decouple the creation of snapshots for the transfer
messages from the publication of the transfer messages. This way, snapshots
can be created to reflect what they are at the time of the transfer operation.
Review: https://reviewboard.asterisk.org/r/4135
........
Merged revisions 427848 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@427870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The CEL pickup test previously looked for a disposition of ANSWER between the
original caller/peer when the call is picked up. This is actually incorrect:
the disposition should, at the very least, not be ANSWER as the call was
never ANSWERed. The disposition is now CANCEL; this patch updates the test
accordingly.
........
Merged revisions 425757 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@425758 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this commit, CDR and CEL tests were expected to trigger
FRACKs (i.e. assertions) due to the fact that the channels they
create have no formats on them. Some code was independently added
recently that attempts to prevent FRACKs from occurring by failing
early when attempting to set up translation paths if one or both
channels support no formats. Unfortunately, this attempt to be helpful
made the CDR and CEL tests go from simply FRACKing to outright
failing and in some cases, failing so badly as to crash Asterisk.
This commit seeks to correct past mistakes by adding the ulaw format
to channels created by the CDR and CEL unit tests. This makes setting
up translation paths succeed, eliminates previously-seen FRACKs, and
ultimately causes the unit tests to succeed again.
Review: https://reviewboard.asterisk.org/r/4014
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@423783 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When a blind transfer occurs that is forced to create a local channel
pair to satisfy the transfer request, information about the local
channel pair is not published. This adds a field to describe that
channel to the blind transfer message struct so that this information
is conveyed properly to consumers of the blind transfer message.
This also fixes a bug in which Stasis() was unable to properly identify
the channel that was replacing an existing Stasis-controlled channel
due to a blind transfer.
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/3921/
........
Merged revisions 421537 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
CEL typically tracks a lot of information using the unique ID of the channel.
This is typically needed due to tying events together using the linked ID of
the various channels involved in a "call", which is derived from the channel ID
of the oldest channel involved in a bridge (or in the case of a Dial, the
parent channel).
Previously, we had updated the extra fields to include the involved channel
names, but forgot to put in the unique ID. This patch corrects that error.
........
Merged revisions 421037 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@421042 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This corrects two issues with the extra field information in Asterisk
12+ in channel event logs.
It is possible to inject custom values into the dialstatus provided by
ast_channel_dial_type() Stasis messages that fall outside the
enumeration allowed for the DIALSTATUS channel variable. CEL now
filters for the allowed values and ignores other values.
The "hangupsource" extra field key is always blank if the far end
channel is a chan_pjsip channel. This is because the hangupsource is
never set for the pjsip channel driver. This change sets the
hangupsource whenever a hangup is queued for chan_pjsip channels.
This corrects an issue with the pjsip channel driver where the
hangupcause information was not being set properly.
Review: https://reviewboard.asterisk.org/r/3690/
........
Merged revisions 418071 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@418084 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update the CEL unit tests that handle BRIDGE_ENTER and BRIDGE_EXIT
events to expect the "bridge_technology" extra field key.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@417447 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Much needed was a way to assign id to objects on creation, and
much change was necessary to accomplish it. Channel uniqueids
and linkedids are split into separate string and creation time
components without breaking linkedid propgation. This allowed
the uniqueid to be specified by the user interface - and those
values are now carried through to channel creation, adding the
assignedids value to every function in the chain including the
channel drivers. For local channels, the second channel can be
specified or left to default to a ;2 suffix of first. In ARI,
bridge, playback, and snoop objects can also be created with a
specified uniqueid.
Along the way, the args order to allocating channels was fixed
in chan_mgcp and chan_gtalk, and linkedid is no longer lost as
masquerade occurs.
(closes issue ASTERISK-23120)
Review: https://reviewboard.asterisk.org/r/3191/
........
Merged revisions 410157 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@410158 65c4cc65-6c06-0410-ace0-fbb531ad65f3
* Fixed the test_cel_attended_transfer_bridges_link unit test to also
account for the local channel link being destroyed now that the bridges
are actually destroyed.
* Made CDR unit test use its own version of do_sleep() from the CEL unit
tests.
........
Merged revisions 406707 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@406710 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Original commit message by mmichelson (asterisk 12 r403311):
"This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such."
The above was initially committed and then reverted at r403398. The problem
was found to be in core_local.c in the publish_local_bridge_message function.
The ast_unreal_lock_all function locks and adds a reference to the returned
channels and while they were being unlocked they were not being unreffed when
no longer needed. Fixed by unreffing the channels.
Also in bridge.c a lock was obtained on "other->chan", but then an attempt was
made to unlock "other" and not the previously locked channel. Fixed by
unlocking "other->chan"
(closes issue ASTERISK-22709)
Reported by: John Bigelow
........
Merged revisions 404237 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404260 65c4cc65-6c06-0410-ace0-fbb531ad65f3
r404042 gave ast_bridge_base_new two new arguments for setting a bridge creator
and name. Unfortunately since a couple test modules aren't compiled by default,
I missed the fact that this change impacted those tests and caused compilation
failures against them.
........
Merged revisions 404048 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@404049 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds channel locks around calls to create channel snapshots as well
as other functions which operate on a channel and then end up
creating a channel snapshot. Functions that expect the channel to be
locked prior to being called have had their documentation updated to
indicate such.
........
Merged revisions 403311 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403314 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r400318 | mmichelson | 2013-10-02 17:08:49 -0500 (Wed, 02 Oct 2013) | 12 lines
Remove unnecessary waits from stasis.
Since caches are updated on publisher threads, there is no need
to wait for the cache updates to occur after a stasis message
is published.
In the case of chan_pjsip device state changes, this set of
changes caused an improvement to performance.
Review: https://reviewboard.asterisk.org/r/2890
........
r400319 | mmichelson | 2013-10-02 17:10:54 -0500 (Wed, 02 Oct 2013) | 3 lines
Remove svn:mergeinfo property.
........
Merged revisions 400318-400319 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400335 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The Dial, Queue, and FollowMe applications need to inhibit the bridging
initial connected line exchange in order to support the 'I' option.
* Replaced the pass_reference flag on ast_bridge_join() with a flags
parameter to pass other flags defined by enum ast_bridge_join_flags.
* Replaced the independent flag on ast_bridge_impart() with a flags
parameter to pass other flags defined by enum ast_bridge_impart_flags.
* Since the Dial, Queue, and FollowMe applications are now the only
callers of ast_bridge_call() and ast_bridge_call_with_flags(), changed the
calling contract to require the initial COLP exchange to already have been
done by the caller.
* Made all callers of ast_bridge_impart() check the return value. It is
important. As a precaution, I also made the compiler complain now if it
is not checked.
* Did some cleanup in parking_tests.c as a result of checking the
ast_bridge_impart() return value.
An independent, but associated change is:
* Reduce stack usage in ast_indicate_data() and add a dropping redundant
connected line verbose message.
(closes issue ASTERISK-22072)
Reported by: Joshua Colp
Review: https://reviewboard.asterisk.org/r/2845/
........
Merged revisions 399136 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@399138 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This modifies the behavior of the CEL engine to conform to documented
behavior for Asterisk 12 as defined on the wiki
https://wiki.asterisk.org/wiki/display/AST/Asterisk+12+CEL+Specification
The primary changes deal with removal of the peer field from function
calls since it is no longer directly relevant to the bridging system
and removal of the layer of CDR-like business logic that was providing
a partial emulation of Asterisk 11 CEL functionality. With this change,
there is no longer a distinction between "bridges" and "conferences"
and all participation changes are denoted with bridge enter and bridge
exit messages.
This updates the CEL unit tests to handle these changes and simplifies
some of the macros used in the process.
This also fixes a segfault when attempting to ref a configuration that
failed to load.
Review: https://reviewboard.asterisk.org/r/2788/
(issue ASTERISK-21567)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397431 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This removes unused code, event types, IE pltypes, and event IE types
where possible and makes several functions private that were once
public. This includes a renumbering of the remaining event and IE types
which breaks binary compatibility with previous versions. The last
remaining consumers of the old event system (or parts thereof) are
main/security_events.c, res/res_security_log.c, tests/test_cel.c,
tests/test_event.c, main/cel.c, and the CEL backends.
Review: https://reviewboard.asterisk.org/r/2703/
(closes issue ASTERISK-22139)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396887 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch does the following:
* It moves the pickup code out of features.c and into pickup.c
* It removes the vast majority of dead code out of features.c. In particular,
this includes the parking code.
(issue ASTERISK-22134)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@396060 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In working with res_stasis, I discovered a significant limitation to
the current structure of stasis_caching_topics: you cannot subscribe
to cache updates for a single channel/bridge/endpoint/etc.
To address this, this patch splits the cache away from the
stasis_caching_topic, making it a first class object. The stasis_cache
object is shared amongst individual stasis_caching_topics that are
created per channel/endpoint/etc. These are still forwarded to global
whatever_all_cached topics, so their use from most of the code does
not change.
In making these changes, I noticed that we frequently used a similar
pattern for bridges, endpoints and channels:
single_topic ----------------> all_topic
^
|
single_topic_cached ----+----> all_topic_cached
|
+----> cache
This pattern was extracted as the 'Stasis Caching Pattern', defined in
stasis_caching_pattern.h. This avoids a lot of duplicate code between
the different domain objects.
Since the cache is now disassociated from its upstream caching topics,
this also necessitated a change to how the 'guaranteed' flag worked
for retrieving from a cache. The code for handling the caching
guarantee was extracted into a 'stasis_topic_wait' function, which
works for any stasis_topic.
(closes issue ASTERISK-22002)
Review: https://reviewboard.asterisk.org/r/2672/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395954 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Improve reliability of attended transfer merge and link tests.
Stop using ast_log(LOG_ERROR, ...); in favor of ast_test_status_update
Remove fred and eve channel helpers since they are not necessary
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395653 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch renames the bridging* files to bridge*. This may seem pedantic
and silly, but it fits better in line with current Asterisk naming conventions:
* channel is not "channeling"
* monitor is not "monitoring"
etc.
A bridge is an object. It is a first class citizen in Asterisk. "Bridging" is
the act of using a bridge on a set of channels - and the API that fulfills that
role is more than just the action.
(closes issue ASTERISK-22130)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395378 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds a new CEL event type, AST_CEL_LOCAL_OPTIMIZE, to represent
local channel optimizations. Local channel optimizations were one of
several things conveyed by the now defunct BRIDGE_UPDATE event type.
This also adds a unit test to test generation of this new CEL event.
Review: https://reviewboard.asterisk.org/r/2676/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394870 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This adds CEL support for blind and attended transfers and call pickup.
During the course of adding this functionality I noticed that
CONF_ENTER, CONF_EXIT, and BRIDGE_TO_CONF events are particularly
useless without a bridge identifier, so I added that as well.
This adds tests for blind transfers, several types of attended
transfers, and call pickup.
The extra field in CEL records now consists of a JSON blob whose fields
are defined on a per-event basis.
Review: https://reviewboard.asterisk.org/r/2658/
(closes issue ASTERISK-21565)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394858 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Since ast_hangup() is effectively a channel destructor, it should be a
void function.
* Make the few silly callers checking the return value no longer do so.
Only the CDR and CEL unit tests checked the return value.
* Make all callers take advantage of the NULL safe change and remove the
NULL check before the call.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394623 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When I corrected the CEL test crash in r394037, I didn't quite pay attention
to how the globals and locals were being shuffled around in the cleanup
callback. I removed the nulling of the global variables, which caused them
to be double cleaned.
This patch puts the global nulling code back (since the vars are cleaned up
by RAII_VARs), and removes the explicit ao2_cleanup() (since they were no-ops,
because the variables had just been nulled).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@394089 65c4cc65-6c06-0410-ace0-fbb531ad65f3
