When built-in components of Asterisk fail to start they cause the
Asterisk startup to abort. In these cases only the most critical
cleanup should be performed - closing databases and terminating
proceses. These cleanups are registered using ast_register_atexit, all
other cleanups should not be run during startup abort.
The main reason for this change is that these cleanup procedures are
untestable from the partially initialized states, if they fail it could
prevent us from ever running the critical cleanup with ast_run_atexits.
Change-Id: Iecc2df98008b21509925ff16740bd5fa29527db3
The dsp_talking_threshold does not represent time in milliseconds. It
represents the average magnitude per sample in the audio packets. This is
what the DSP uses to determine if a packet is silence or talking/noise.
Change-Id: If6f939c100eb92a5ac6c21236559018eeaf58443
The Goertzel calculations get less accurate the lower the signal level
being worked with becomes because there is less resolution remaining.
If it is too low we can erroneously detect a tone where none really
exists. The searched for fax frequencies not only need to be so much
stronger than the background noise they must also be a minimum strength.
* Add needed minimum threshold test to tone_detect().
* Set TONE_THRESHOLD to allow low volume frequency spread detection.
ASTERISK-26237 #close
Reported by: Richard Mudgett
Change-Id: I84dbba7f7628fa13720add6a88eae3b129e066fc
This patch adds support for automatically detecting the type of DTMF that a
PJSIP endpoint supports. When the 'dtmf_mode' endpoint option is set to 'auto',
the channel created for an endpoint will attempt to determine if RFC 4733
DTMF is supported. If so, it will use that DTMF type. If not, the DTMF type
for the channel will be set to inband.
Review: https://reviewboard.asterisk.org/r/4438
ASTERISK-24706 #close
Reported by: yaron nahum
patches:
yaron_patch_3_Feb.diff submitted by yaron nahum (License 6676)
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434637 65c4cc65-6c06-0410-ace0-fbb531ad65f3
These are fixes for compilation under gcc 5.0...
chan_sip.c: In parse_request needed to make 'lim' unsigned.
inline_api.h: Needed to add a check for '__GNUC_STDC_INLINE__' to detect C99
inline semantics (same as clang).
ccss.c: In ast_cc_set_parm, needed to fix weird comparison.
dsp.c: Needed to work around a possible compiler bug. It was throwing
an array-bounds error but neither
sgriepentrog, rmudgett nor I could figure out why.
manager.c: In action_atxfer, needed to correct an array allocation.
This patch will go to 11, 13, trunk.
Review: https://reviewboard.asterisk.org/r/4581/
Reported-by: Jeffrey Ollie
Tested-by: George Joseph
ASTERISK-24932 #close
........
Merged revisions 434113 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/branches/13@434114 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Update and extend the configuration_file group and enable linking. Commit other cleanups from multi-version Doxygen testing. Update title that was left behind many years ago.
(issue ASTERISK-20259)
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@375182 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Asterisk's DTMF Specifications are based on AT&T specs, which may not be compatible in other countries.
Various countries have different specifications for the maximum power level differences
between the DTMF low group and high group of frequencies.
Power level difference between frequencies for different Administrations/RPOAs
NTT = Max. 5 dB
AT&T = 4dB(reverse) to 8dB(normal)
Danish = Max. 6 dB
Australian = Max. 10 dB
Brazilian = Max. 9 dB
ETSI = Max. 6 dB from ETSI ES 201 235-3 V1.3.1 (2006-03)
Now allow 4 variables to be individually configured in dsp.conf, with reasonable min/max of 2dB to 20dB.
Default is AT&T specifications
Add's the following variables to dsp.conf
;dtmf_normal_twist=6.31
;dtmf_reverse_twist=2.51
;relax_dtmf_normal_twist=6.31
;relax_dtmf_reverse_twist=3.98
(closes issue ASTERISK-20442)
Reported by: tbsky
Tested by: tbsky,alecdavis
alecdavis (license 585)
Review https://reviewboard.asterisk.org/r/2141/
........
Merged revisions 374384 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 374385 from http://svn.asterisk.org/svn/asterisk/branches/10
........
Merged revisions 374386 from http://svn.asterisk.org/svn/asterisk/branches/11
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@374387 65c4cc65-6c06-0410-ace0-fbb531ad65f3
janitor cleanup. No functional change.
1). ast_dsp_call_progress: use 'short samp' instead of s[x] inside loop.
apply same casting as other _init, dsp->energy = (int32_t) samp * (int32_t) samp
2). ast_dtmf_detect_init: move repeated setting of s->energy to outside of loop.
do goertzel_init loop first before setting s->lasthit and s->current_hit, consistant with ast_dsp_digitreset()
3). ast_mf_detect_init:
do goertzel_init loop first before setting s->hits[] and s->current_hit, consistant with ast_dsp_digitreset()
4). Don't chain init different variables, as the type may change
Review https://reviewboard.asterisk.org/r/2107/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@373275 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r369001 | kpfleming | 2012-06-15 10:56:08 -0500 (Fri, 15 Jun 2012) | 11 lines
Add support-level indications to many more source files.
Since we now have tools that scan through the source tree looking for files
with specific support levels, we need to ensure that every file that is
a component of a 'core' or 'extended' module (or the main Asterisk binary)
is explicitly marked with its support level. This patch adds support-level
indications to many more source files in tree, but avoids adding them to
third-party libraries that are included in the tree and to source files
that don't end up involved in Asterisk itself.
........
r369002 | kpfleming | 2012-06-15 10:57:14 -0500 (Fri, 15 Jun 2012) | 3 lines
Add a script to enable finding source files without support-levels defined.
........
Merged revisions 369001-369002 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 369005 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@369013 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Everything still compiled after making these changes, so I assume these
whitespace-only changes didn't break anything (and shouldn't have).
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@360190 65c4cc65-6c06-0410-ace0-fbb531ad65f3
There are many benefits to making the ast_channel an opaque handle, from
increasing maintainability to presenting ways to kill masquerades. This patch
kicks things off by taking things a field at a time, renaming the field to
'__do_not_use_${fieldname}' and then writing setters/getters and converting the
existing code to using them. When all fields are done, we can move ast_channel
to a C file from channel.h and lop off the '__do_not_use_'.
This patch sets up main/channel_interal_api.c to be the only file that actually
accesses the ast_channel's fields directly. The intent would be for any API
functions in channel.c to use the accessor functions. No more monkeying around
with channel internals. We should use our own APIs.
The interesting changes in this patch are the addition of
channel_internal_api.c, the moving of the AST_DATA stuff from channel.c to
channel_internal_api.c (note: the AST_DATA stuff will have to be reworked to
use accessor functions when ast_channel is really opaque), and some re-working
of the way channel iterators/callbacks are handled so as to avoid creating fake
ast_channels on the stack to pass in matching data by directly accessing fields
(since "name" is a stringfield and the fake channel doesn't init the
stringfields, you can't use the ast_channel_name_set() function). I went with
ast_channel_name(chan) for a getter, and ast_channel_name_set(chan, name) for a
setter.
The majority of the grunt-work for this change was done by writing a semantic
patch using Coccinelle ( http://coccinelle.lip6.fr/ ).
Review: https://reviewboard.asterisk.org/r/1655/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@350223 65c4cc65-6c06-0410-ace0-fbb531ad65f3
When receiving calls from a mobile phone into a DISA system on a connection with
significant interference, the reporter's Asterisk system would interpret DTMF incorrectly
and replicate digits received. This patch resolves that by increasing the number of
frames a mismatch has to be detected before assuming the DTMF is over by 1 frame and
adjusts dtmf_detect function to reset hits and misses only when an edge is detected.
(closes issue ASTERISK-17493)
Reported by: Alec Davis
Patches:
bug18904-refactor.diff.txt uploaded by Alec Davis (license 5546)
Review: https://reviewboard.asterisk.org/r/1130/
........
Merged revisions 349728 from http://svn.asterisk.org/svn/asterisk/branches/1.8
........
Merged revisions 349729 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349730 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This commit removes the V.21 preamble detection code previously added to the
generic DSP implementation in Asterisk, and instead enhances the res_fax module
to be able to utilize V.21 preamble detection functionality made available by
FAX technology modules. This commit also adds such support to res_fax_spandsp,
which uses the Spandsp modem tone detection code to do the V.21 preamble
detection.
There should be no functional change here, other than much more reliable V.21
preamble detection (and thus T.38 gateway initiation).
........
Merged revisions 349248 from http://svn.asterisk.org/svn/asterisk/branches/10
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@349249 65c4cc65-6c06-0410-ace0-fbb531ad65f3
In chan_dahdi.conf, the user can now use length 4 patterns in addition to the usual length 2 patterns. The s
ntax remains the same and the method used to track the pattern history will only change when using the length
4 patterns.
(closes issue SWP-3250)
Code:
jrose
rmudgett
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@312384 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch is the foundation of an entire new way of looking at media in Asterisk.
The code present in this patch is everything required to complete phase1 of my
Media Architecture proposal. For more information about this project visit the link below.
https://wiki.asterisk.org/wiki/display/AST/Media+Architecture+Proposal
The primary function of this patch is to convert all the usages of format
bitfields in Asterisk to use the new format and format_cap APIs. Functionally
no change in behavior should be present in this patch. Thanks to twilson
and russell for all the time they spent reviewing these changes.
Review: https://reviewboard.asterisk.org/r/1083/
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@306010 65c4cc65-6c06-0410-ace0-fbb531ad65f3
What I did not originally see in my previous commit was that even though the
next digit could be detected before the previous was considered ended, the
detection of the next digit effectively ends the detection of the previous.
Therefore, the length moves in lockstep with the digit, and no separate counter
is needed for the length alone.
(closes issue #17371)
Reported by: alecdavis
(closes issue #17474)
Reported by: kenner
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@268456 65c4cc65-6c06-0410-ace0-fbb531ad65f3
(closes issue #17235)
Reported by: frawd
Patches:
new_dtmf_dsp_len.patch uploaded by frawd (license 610)
20100518__issue17235.diff.txt uploaded by tilghman (license 14)
Tested by: frawd
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@264204 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r263949 | tilghman | 2010-05-19 01:32:27 -0500 (Wed, 19 May 2010) | 8 lines
Because progress is called multiple times, across several frames, we must persist states when detecting multitone sequences.
(closes issue #16749)
Reported by: dant
Patches:
dsp.c-bug16749-1.patch uploaded by dant (license 670)
Tested by: dant
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@263950 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r233014 | mnick | 2009-12-04 09:17:03 -0600 (Fri, 04 Dec 2009) | 11 lines
Warning message gets displayed only once
Added additional field 'int display_inband_dtmf_warning', which when set to '1' displays the warning ('Inband DTMF is not supported on codec %s. Use RFC2833'), and when set to '0' doesn't display the warning. Otherwise you would get hundreds of warnings every second.
(closes issue #15769)
Reported by: falves11
Patches:
patch_15769_14.txt uploaded by mnick (license 874)
Tested by: mnick, falves11
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@233046 65c4cc65-6c06-0410-ace0-fbb531ad65f3
