Sending the "RECORD FILE" command without the optional
`offset_samples` argument can result in two beeps playing on the
channel.
This bug has been present since Asterisk 0.3.0 (2003-02-06).
ASTERISK-30457 #close
Change-Id: I95e88aa59378784d7f0eb648843f090e6723b787
Make the existing CURL parameters configurable and allow
to specify the usable protocols, proxy and DNS timeout.
ASTERISK-30340
Change-Id: I2eb02ef44190e026716720419bcbdbcc8125777b
* Added a new function ast_utf8_replace_invalid_chars() to
utf8.c that copies a string replacing any invalid UTF-8
sequences with the Unicode specified U+FFFD replacement
character. For example: "abc\xffdef" becomes "abc\uFFFDdef".
Any UTF-8 compliant implementation will show that character
as a � character.
* Updated res_pjsip:set_id_from_hdr() to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
* Updated stasis_channels:ast_channel_publish_varset to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
ASTERISK-27830
Change-Id: I4ffbdb19c80bf0efc675d40078a3ca4f85c567d8
Phones moving between subnets on multi-homed server have their
initially connected interface IP cached in the SERVER variable,
even when it is not specified in the configuration files. This
prevents phones from obtaining the correct SERVER variable value
when they move to another subnet.
ASTERISK-30388 #close
Reported-by: cmaj
Change-Id: I1d18987a9d58e85556b4c4a6814ce7006524cc92
contributed pjproject - patch to check sub->pending_notify
in evsub.c:on_tsx_state before calling
pjsip_evsub_send_request()
res_pjsip_pubsub - change post pjsip 2.13 behavior to use
pubsub_on_refresh_timeout to avoid the ao2_cleanup call on
the sub_tree. This is is because the final NOTIFY send is no
longer the last place the sub_tree is referenced.
ASTERISK-30419
Change-Id: Ib5cc662ce578e9adcda312e16c58a10b6453e438
Removed multiple patches.
Code chages in res_pjsip_pubsub due to changes in evsub.
Pjsip now calls on_evsub_state() before on_rx_refresh(),
so the sub tree deletion that used to take place in
on_evsub_state() now must take place in on_rx_refresh().
Additionally, pjsip now requires that you send the NOTIFY
from within on_rx_refresh(), otherwise it will assert
when going to send the 200 OK. The idea is that it will
look for this NOTIFY and cache it until after sending the
response in order to deal with the self-imposed message
mis-order. Asterisk previously dealt with this by pushing
the NOTIFY in on_rx_refresh(), but pjsip now forces us
to use it's method.
Changes were required to configure in order to detect
which way pjsip handles this as the two are not
compatible for the reasons mentioned above.
A corresponding change in testsuite is required in order
to deal with the small interal timing changes caused by
moving the NOTIFY send.
ASTERISK-30325
Change-Id: I50b00cac89d950d3511d7b250a1c641965d9fe7f
Adds the overlap_context option, which can be used
to explicitly specify a context to use for overlap
dialing extension matches, rather than forcibly
using the context configured for the endpoint.
ASTERISK-30262 #close
Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db
Added NULL pointer check and channel lock to prevent resource release
while the chanspy is processing.
ASTERISK-29604
Change-Id: Ibdc675f98052da32333b19685b1708a3751b6d24
Variable references within global variable assignments are now
expanded rather than being included literally.
ASTERISK-30406 #close
Change-Id: I136e8d6395e90a4c92d9777a46a7bc3edb08d05d
Rounding issues with double math were causing rtp timestamp
slips in outgoing packets. We're now back to integer math
and are getting no more slips.
ASTERISK-30391
Change-Id: I6ba992b49ffdf9ebea074581dfa784a188c661a4
For most modules that interacted with app_macro, this change is limited
to no longer looking for the current context from the macrocontext when
set. Additionally, the following modules are impacted:
app_dial - no longer supports M^ connected/redirecting macro
app_minivm - samples written using macro will no longer work.
The sample needs a re-write
app_queue - can no longer a macro on the called party's channel.
Use gosub which is currently supported
ccss - no callback macro, gosub only
app_voicemail - no macro support
channel - remove macrocontext and priority, no connected line or
redirection macro options
options - stdexten is deprecated to gosub as the default and only
pbx - removed macrolock
pbx_dundi - no longer look for macro
snmp - removed macro context, exten, and priority
ASTERISK-30304
Change-Id: I830daab293117179b8d61bd4df0d971a1b3d07f6
Add ability to set HANGUPCAUSE when SIP causecode received in BYE (in addition to currently supported Q.850).
ASTERISK-30319 #close
Change-Id: I3f55622dc680ce713a2ffb5a458ef5dd39fcf645
-----------------
This commit reinstates MES with some casting fixes to the
functions in time.h that convert between doubles and timeval
structures. The casting issues were causing incorrect
timestamps to be calculated which caused transcoding from/to
G722 to produce bad or no audio.
ASTERISK-30391
-----------------
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
Change-Id: I4fce265965e68c3fdfeca55e614371ee69c65038
Do not crash when a URL has no path component as in this case the
ast_uri_path function will return NULL. Make the code cope with not
having a path.
The below would crash
> media cache create http://google.com /tmp/foo.wav
Thread 1 "asterisk" received signal SIGSEGV, Segmentation fault.
0x0000ffff836616cc in strrchr () from /lib/aarch64-linux-gnu/libc.so.6
(gdb) bt
#0 0x0000ffff836616cc in strrchr () from /lib/aarch64-linux-gnu/libc.so.6
#1 0x0000ffff43d43a78 in file_extension_from_string (str=<optimized out>, buffer=buffer@entry=0xffffca9973c0 "",
capacity=capacity@entry=64) at res_http_media_cache.c:288
#2 0x0000ffff43d43bac in file_extension_from_url_path (bucket_file=bucket_file@entry=0x3bf96568,
buffer=buffer@entry=0xffffca9973c0 "", capacity=capacity@entry=64) at res_http_media_cache.c:378
#3 0x0000ffff43d43c74 in bucket_file_set_extension (bucket_file=bucket_file@entry=0x3bf96568) at res_http_media_cache.c:392
#4 0x0000ffff43d43d10 in bucket_file_run_curl (bucket_file=0x3bf96568) at res_http_media_cache.c:555
#5 0x0000ffff43d43f74 in bucket_http_wizard_create (sorcery=<optimized out>, data=<optimized out>, object=<optimized out>)
at res_http_media_cache.c:613
#6 0x0000000000487638 in bucket_file_wizard_create (sorcery=<optimized out>, data=<optimized out>, object=<optimized out>)
at bucket.c:191
#7 0x0000000000554408 in sorcery_wizard_create (object_wizard=object_wizard@entry=0x3b9f0718,
details=details@entry=0xffffca9974a8) at sorcery.c:2027
#8 0x0000000000559698 in ast_sorcery_create (sorcery=<optimized out>, object=object@entry=0x3bf96568) at sorcery.c:2077
#9 0x00000000004893a4 in ast_bucket_file_create (file=file@entry=0x3bf96568) at bucket.c:727
#10 0x00000000004f877c in ast_media_cache_create_or_update (uri=0x3bfa1103 "https://google.com",
file_path=0x3bfa1116 "/tmp/foo.wav", metadata=metadata@entry=0x0) at media_cache.c:335
#11 0x00000000004f88ec in media_cache_handle_create_item (e=<optimized out>, cmd=<optimized out>, a=0xffffca9976b8)
at media_cache.c:640
ASTERISK-30375 #close
Change-Id: I6a9433688cb5d3d4be8758b7642d923bdde6c273
When Asterisk receives a new websocket conenction, it creates a new
pjsip transport for it and copies connection data into it. The
transport manager then uses the remote IP address and port on the
transport to create a monitor for each connection. However, the
remote port wasn't being copied, only the IP address which meant
that the transport manager was creating only 1 monitoring entry for
all websocket connections from the same IP address. Therefore, if
one of those connections failed, it deleted the transport taking
all the the connections from that same IP address with it.
* We now copy the remote port into the created transport and the
transport manager behaves correctly.
ASTERISK-30369
Change-Id: Ib506d40897ea6286455ac0be4dfbb0ed43b727e1
This module has been updated to provide additional
quality statistics in the form of an Asterisk
Media Experience Score. The score is avilable using
the same mechanisms you'd use to retrieve jitter, loss,
and rtt statistics. For more information about the
score and how to retrieve it, see
https://wiki.asterisk.org/wiki/display/AST/Media+Experience+Score
* Updated chan_pjsip to set quality channel variables when a
call ends.
* Updated channels/pjsip/dialplan_functions.c to add the ability
to retrieve the MES along with the existing rtcp stats when
using the CHANNEL dialplan function.
* Added the ast_debug_rtp_is_allowed and ast_debug_rtcp_is_allowed
checks for debugging purposes.
* Added several function to time.h for manipulating time-in-samples
and times represented as double seconds.
* Updated rtp_engine.c to pass through the MES when stats are
requested. Also debug output that dumps the stats when an
rtp instance is destroyed.
* Updated res_rtp_asterisk.c to implement the calculation of the
MES. In the process, also had to update the calculation of
jitter. Many debugging statements were also changed to be
more informative.
* Added a unit test for internal testing. The test should not be
run during normal operation and is disabled by default.
ASTERISK-30280
Change-Id: I458cb9a311e8e5dc1db769b8babbcf2e093f107a
Currently, there is no Caller ID available to us when
checking for an extension match when handling INVITEs.
As a result, extension patterns that depend on the Caller ID
are not matched and calls may be incorrectly rejected.
The Caller ID is not available because the supplement that
adds Caller ID to the session does not execute until after
this check. Supplement callbacks cannot yet be executed
at this point since the session is not yet in the appropriate
state.
To fix this without impacting existing behavior, the Caller ID
number is now retrieved before attempting to pattern match.
This ensures pattern matching works correctly and there is
no behavior change to the way supplements are called.
ASTERISK-28767 #close
Change-Id: Iec7f5a3b90e51b65ccf74342f96bf80314b7cfc7
When a call is put on hold and it has moh_passthrough and rtp_timeout
set on the endpoint, the wrong timeout will be used. rtp_timeout_hold is
expected to be used, but rtp_timeout is used instead. This change adds a
couple of checks for locally_held to determine if rtp_timeout_hold needs
to be used instead of rtp_timeout.
ASTERISK-30350
Change-Id: I7b106fc244332014216d12bba851cefe884cc25f
Fix aor lookup on sip path addition. Issue happens in case of dialing
with @ and overriding user part of RURI.
ASTERISK-30100 #close
Reported-by: Yury Kirsanov
Change-Id: I3f2c42a583578c94397b113e32ca3ebf2d600e13
The `ast_geoloc_datastore_add_eprofile` function does not return 0 on
success, it returns the size of the underlying datastore. This means
that the datastore will be freed and its pointer set to NULL when no
error occured at all.
ASTERISK-30346
Change-Id: Iea9b209bd1244cc57b903b9496cb680c356e4bb9
When adding AOC to an outgoing response the code
assumed that a body would exist for comparing the
Content-Type. This isn't always true.
The code now checks to make sure the response has
a body before checking the Content-Type.
ASTERISK-21502
Change-Id: Iaead371434fc3bc693dad487228106a7d7a5ac76
chan_sip supported sending AOC-D and AOC-E information in SIP INFO
messages in an "AOC" header in a format that was originally defined by
Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC
format that is supported by devices from multiple vendors, including
Snom phones with firmware >= 8.4.2 (released in 2010).
This commit adds a new res_pjsip_aoc module that inserts AOC information
into outgoing messages or sends SIP INFO messages as described below.
It also fixes a small issue in res_pjsip_session which didn't always
call session supplements on outgoing_response.
* AOC-S in the 180/183/200 responses to an INVITE request
* AOC-S in SIP INFO (if a 200 response has already been sent or if the
INVITE was sent by Asterisk)
* AOC-D in SIP INFO
* AOC-D in the 200 response to a BYE request (if the client hangs up)
* AOC-D in a BYE request (if Asterisk hangs up)
* AOC-E in the 200 response to a BYE request (if the client hangs up)
* AOC-E in a BYE request (if Asterisk hangs up)
The specification defines one more, AOC-S in an INVITE request, which
is not implemented here because it is not currently possible in
Asterisk to have AOC data ready at this point in call setup. Once
specifying AOC-S via the dialplan or passing it through from another
SIP channel's INVITE is possible, that might be added.
The SIP INFO requests are sent out immediately when the AOC indication
is received. The others are inserted into an appropriate outgoing
message whenever that is ready to be sent. In the latter case, the XML
is stored in a channel variable at the time the AOC indication is
received. Depending on where the AOC indications are coming from (e.g.
PRI or AMI), it may not always be possible to guarantee that the AOC-E
is available in time for the BYE.
Successfully tested AOC-D and both variants of AOC-E with a Snom D735
running firmware 10.1.127.10. It does not appear to properly support
AOC-S however, so that could only be tested by inspecting SIP traces.
ASTERISK-21502 #close
Reported-by: Matt Jordan <mjordan@digium.com>
Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333
Adds support for the capture agent name field
of the Homer protocol to Asterisk by allowing
users to specify a name that will be sent to
the HEP server.
ASTERISK-30322 #close
Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b
This fixes a small typo in the from_domain documentation on the endpoint documentation
ASTERISK-30328 #close
Change-Id: Ia6f0897c3f5cab899ef2cde6b3ac07265b8beb21
Some SIP devices use an empty extension for PLAR functionality.
Rather than rejecting these empty extensions, we now use the s
extension for such calls to mirror the existing PLAR functionality
in Asterisk (e.g. chan_dahdi).
ASTERISK-30265 #close
Change-Id: I0861a405cd49bbbf532b52f7b47f0e2810832590
Updates the documentation for the 'contact_user' field to point out the
default outbound contact if no contact_user is specified 's'
ASTERISK-30316 #close
Change-Id: I61f24fb9164e4d07e05908a2511805281874c876
Adds support for custom URI and header parameters
in the From header in PJSIP. Parameters can be
both set and read using this function.
ASTERISK-30150 #close
Change-Id: Ifb1bc3c512ad5f6faeaebd7817f004a2ecbd6428
When passing a JSON body to the 'create' channel route
it would be converted into Asterisk variables, but never
freed resulting in a memory leak.
This change makes it so that the variables are freed in
all cases.
ASTERISK-30344
Change-Id: I924dbd866a01c6073e2d6fb846ccaa27ef72d49d
The commit that rearchitected media formats,
a2c912e997 (ASTERISK_23114)
introduced a regression by improperly translating code in res_adsi.c.
In particular, the pointer to the frame buffer was initialized
at the top of adsi_careful_send, rather than dynamically updating it
for each frame, as is required.
This resulted in the first frame being repeatedly sent,
rather than advancing through the frames.
This corrupted the transmission of the CAS to the CPE,
which meant that CPE would never respond with the DTMF acknowledgment,
effectively completely breaking ADSI functionality.
This issue is now fixed, and ADSI now works properly again.
ASTERISK-29793 #close
Change-Id: Icdeddf733eda2981c98712d1ac9cddc0db507dbe
It was possible for a module that registered for transport monitor
events to pass in a pjsip_transport that had already been freed.
This caused pjsip_transport_events to crash when looking up the
monitor for the transport. The fix is a two pronged approach.
1. We now increment the reference count on pjsip_transports when we
create monitors for them, then decrement the count when the
transport is going to be destroyed.
2. There are now APIs to register and unregister monitor callbacks
by "transport key" which is a string concatenation of the remote ip
address and port. This way the module needing to monitor the
transport doesn't have to hold on to the transport object itself to
unregister. It just has to save the transport_key.
* Added the pjsip_transport reference increment and decrement.
* Changed the internal transport monitor container key from the
transport->obj_name (which may not be unique anyway) to the
transport_key.
* Added a helper macro AST_SIP_MAKE_REMOTE_IPADDR_PORT_STR() that
fills a buffer with the transport_key using a passed-in
pjsip_transport.
* Added the following functions:
ast_sip_transport_monitor_register_key
ast_sip_transport_monitor_register_replace_key
ast_sip_transport_monitor_unregister_key
and marked their non-key counterparts as deprecated.
* Updated res_pjsip_pubsub and res_pjsip_outbound_register to use
the new "key" monitor functions.
NOTE: res_pjsip_registrar also uses the transport monitor
functionality but doesn't have a persistent object other than
contact to store a transport key. At this time, it continues to
use the non-key monitor functions.
ASTERISK-30244
Change-Id: I1a20baf2a8643c272dcf819871d6c395f148f00b
(cherry picked from commit 7684c9e907)
This PR contains two relatively separate changes in channel.c and
res_pjsip_session.c which ensure that topology changes are not ignored
in cases where they should be handled.
For channel.c:
The function ast_channel_request_stream_topology_change only triggers a
stream topology request change indication, if the channel's topology
does not equal the requested topology. However, a channel could be in a
state where it is currently "negotiating" a new topology but hasn't
updated it yet, so the topology request change would be lost. Channels
need to be able to handle such situations internally and stream
topology requests should therefore always be passed on.
In the case of chan_pjsip for example, it queues a session refresh
(re-INVITE) if it is currently in the middle of a transaction or has
pending requests (among other reasons).
Now, ast_channel_request_stream_topology_change always indicates a
stream topology request change even if the requested topology equals the
channel's topology.
For res_pjsip_session.c:
The function resolve_refresh_media_states does not process stream state
changes if the delayed active state differs from the current active
state. I.e. if the currently active stream state has changed between the
time the sip session refresh request was queued and the time it is being
processed, the session refresh is ignored. However, res_pjsip_session
contains logic that ensures that session refreshes are queued and
re-queued correctly if a session refresh is currently not possible. So
this check is not necessary and led to some session refreshes being
lost.
Now, a session refresh is done even if the delayed active state differs
from the current active state and it is checked whether the delayed
pending state differs from the current active - because that means a
refresh is necessary.
Further, the unit test of resolve_refresh_media_states was adapted to
reflect the new behavior. I.e. the changes to delayed pending are
prioritized over the changes to current active because we want to
preserve the original intention of the pending state.
ASTERISK-30184
Change-Id: Icd0703295271089057717006730b555b9a1d4e5a
The "RECORD FILE" command in res_agi has its own
implementation for actually doing the recording. This
has resulted in it not actually obeying the option
"transmit_silence" when recording.
This change causes it to now send silence if the
option is enabled.
ASTERISK-30314
Change-Id: Ib3a85601ff35d1b904f836691bad8a4b7e957174
When a websocket (or potentially any stateful connection) is quickly
created then destroyed, it is possible that the qualify thread will
destroy the transaction before the initialzing thread is finished
with it.
Depending on the timing, this can cause an assertion within pjsip.
To prevent this, ast_send_stateful_response will now create the group
lock and add a reference to it before creating the transaction.
While this should resolve the crash, there is still the potential that
the contact will not be cleaned up properly, see:ASTERISK~29286. As a
result, the contact has to 'time out' before it will be removed.
ASTERISK-28689
Change-Id: Id050fded2247a04d8f0fc5b8a2cf3e5482cb8cee
Current registration code use pjsip_parse_uri to verify outbound_proxy
that is different from the reading this option for the endpoint. This
made value with multiple proxies invalid for registration pjsip settings.
Removing URI validation helps to use registration through multiple proxies.
ASTERISK-30217 #close
Change-Id: I064558e66f04b9f3260c46181812a01349761357
Fix compilation errors caused by using size_t
instead of uintmax_t and non-portable format
specifiers.
ASTERISK-30273 #close
Change-Id: I363e6057ef84d54b88af80d23ad6147eef9216ee
Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
The PJSIP notify CLI commands allow for using
"options" configured in pjsip_notify.conf.
This allows these same options to be used in
AMI actions as well.
Additionally, as part of this improvement,
some repetitive common code is refactored.
ASTERISK-30263 #close
Change-Id: Ie4496b322b63b61eaf9672183a959ab99a04b6b5
Expands the pjsip logger to support the ability to filter
by SIP message method. This can make certain types of SIP debugging
easier by only logging messages of particular method(s).
ASTERISK-30146 #close
Co-authored-by: Sean Bright <sean@seanbright.com>
Change-Id: I9c8cbb6fc8686ef21190eb42e08bc9a9b147707f
pjproject does not provide any mechanism of removing
event packages, which means that once a subscription
handler is registered, it is effectively permanent.
pjproject will assert if the same event package is
ever registered again, so currently unloading and
loading any Asterisk modules that use subscriptions
will cause a crash that is beyond our control.
For that reason, we now prevent users from being
able to unload these modules, to prevent them
from ever being loaded twice.
ASTERISK-30264 #close
Change-Id: I7fdcb1a5e44d38b7ba10c44259fe98f0ae9bc12c
Add enum to allow setting optional direction. If set to only one
direction, only feed matching-direction frames to the associated
slin factory.
This prevents mangling the transcoder on non-mixed frames when the
READ and WRITE frames would have otherwise required it. Also
removes the need to mute or discard the un-wanted frames as they
are no longer added in the first place.
res_stasis_snoop is changed to use this addition to set direction
on audiohook based on spy direction.
If no direction is set, the ast_audiohook_init will init this enum
to BOTH which maintains existing functionality.
ASTERISK-30252
Change-Id: If8716bad334562a5d812be4eeb2a92e4f3be28eb
Adds support for detecting audible ringback tone
to the TONE_DETECT function using the p option.
ASTERISK-30254 #close
Change-Id: Ie2329ff245248768367d26749c285fbe823f6414
"fname" is passed in as a const char *, but strstr() mangles that
into a char *, and we were attempting to modify the string in place.
This is an unwanted (and undocumented) side-effect.
ASTERISK-30213
Change-Id: Ifa36d352aafeb7f9beec3f746332865c7d21e629
Also added a note to the geolocation.conf.sample file
and added a README to the res/res_geolocation/wiki
directory.
Change-Id: I89c3c5db8c0701b33127993622d5e4f904bddfbc
