Add log-caller-id-name option to log Caller ID Name in queue log
This patch introduces a new global configuration option, log-caller-id-name,
to queues.conf to control whether the Caller ID name is logged when a call enters a queue.
When log-caller-id-name=yes, the Caller ID name is logged
as parameter 4 in the queue log, provided it’s allowed by the
existing log_restricted_caller_id rules. If log-caller-id-name=no (the default),
the Caller ID name is omitted from the logs.
Fixes: #1091
UserNote: This patch adds a global configuration option, log-caller-id-name, to queues.conf
to control whether the Caller ID name is logged as parameter 4 when a call enters a queue.
When log-caller-id-name=yes, the Caller ID name is included in the queue log,
Any '|' characters in the caller ID name will be replaced with '_'.
(provided it’s allowed by the existing log_restricted_caller_id rules).
When log-caller-id-name=no (the default), the Caller ID name is omitted.
Commands in the "[startup_commands]" section of cli.conf have historically run
after all core and module initialization has been completed and just before
"Asterisk Ready" is printed on the console. This meant that if you
wanted to debug initialization of a specific module, your only option
was to turn on debug for everything by setting "debug" in asterisk.conf.
This commit introduces options to allow you to run CLI commands earlier in
the asterisk startup process.
A command with a value of "pre-init" will run just after logger initialization
but before most core, and all module, initialization.
A command with a value of "pre-module" will run just after all core
initialization but before all module initialization.
A command with a value of "fully-booted" (or "yes" for backwards
compatibility) will run as they always have been...after all
initialization and just before "Asterisk Ready" is printed on the console.
This means you could do this...
```
[startup_commands]
core set debug 3 res_pjsip.so = pre-module
core set debug 0 res_pjsip.so = fully-booted
```
This would turn debugging on for res_pjsip.so to catch any module
initialization debug messages then turn it off again after the module is
loaded.
UserNote: In cli.conf, you can now define startup commands that run before
core initialization and before module initialization.
This adds the Last Number Redial feature to
simple switch.
UserNote: Users can now redial the last number
called if the lastnumredial setting is set to yes.
Resolves: #437
* Refactored pjproject code to support the new algorithms and
added a patch file to third-party/pjproject/patches
* Added new parameters to the pjsip auth object:
* password_digest = <algorithm>:<digest>
* supported_algorithms_uac = List of algorithms to support
when acting as a UAC.
* supported_algorithms_uas = List of algorithms to support
when acting as a UAS.
See the auth object in pjsip.conf.sample for detailed info.
* Updated both res_pjsip_authenticator_digest.c (for UAS) and
res_pjsip_outbound_authentocator_digest.c (UAC) to suport the
new algorithms.
The new algorithms are only available with the bundled version
of pjproject, or an external version > 2.14.1. OpenSSL version
1.1.1 or greater is required to support SHA-512-256.
Resolves: #948
UserNote: The SHA-256 and SHA-512-256 algorithms are now available
for authentication as both a UAS and a UAC.
Added a new option "qualify_2xx_only" to the res_pjsip AOR qualify
feature to mark a contact as available only if an OPTIONS request
returns a 2XX response. If the option is not specified or is false,
any response to the OPTIONS request marks the contact as available.
UserNote: The pjsip.conf AOR section now has a "qualify_2xx_only"
option that can be set so that only 2XX responses to OPTIONS requests
used to qualify a contact will mark the contact as available.
Fixes: #1007
UserNote: use the p option of AddQueueMember() for paused member state.
Optionally, use the r(reason) option to specify a custom reason for the pause.
Added a new option "unknown_tn_attest_level" to allow Identity
headers to be sent when a callerid TN isn't explicitly configured
in stir_shaken.conf. Since there's no TN object, a private_key_file
and public_cert_url must be configured in the attestation or profile
objects.
Since "unknown_tn_attest_level" uses the same enum as attest_level,
some of the sorcery macros had to be refactored to allow sharing
the enum and to/from string conversion functions.
Also fixed a memory leak in crypto_utils:pem_file_cb().
Resolves: #921
UserNote: You can now set the "unknown_tn_attest_level" option
in the attestation and/or profile objects in stir_shaken.conf to
enable sending Identity headers for callerid TNs not explicitly
configured.
Normally, when one party in a call sends Asterisk an SDP with
a "sendonly" or "inactive" attribute it means "hold" and causes
Asterisk to start playing MOH back to the other party. This can be
problematic if it happens at certain times, such as in a 183
Progress message, because the MOH will replace any early media you
may be playing to the calling party. If you set this option
to "yes" on an endpoint and the endpoint receives an SDP
with "sendonly" or "inactive", Asterisk will NOT play MOH back to
the other party.
Resolves: #979
UserNote: The new "suppress_moh_on_sendonly" endpoint option
can be used to prevent playing MOH back to a caller if the remote
end sends "sendonly" or "inactive" (hold) to Asterisk in an SDP.
UserNote: You can now perform more granular filtering on events
in manager.conf using expressions like
`eventfilter(name(Newchannel),header(Channel),method(starts_with)) = PJSIP/`
This is much more efficient than
`eventfilter = Event: Newchannel.*Channel: PJSIP/`
Full syntax guide is in configs/samples/manager.conf.sample.
Add dialplan application PJSIPNOTIFY to send either pre-configured
NOTIFY messages from pjsip_notify.conf or with headers defined in
dialplan.
Also adds the ability to send pre-configured NOTIFY commands to a
channel via the CLI.
Resolves: #799
UserNote: A new dialplan application PJSIPNotify is now available
which can send SIP NOTIFY requests from the dialplan.
The pjsip send notify CLI command has also been enhanced to allow
sending NOTIFY messages to a specific channel. Syntax:
pjsip send notify <option> channel <channel>
This patch introduces a new identifier for channels: tenantid. It's
a stringfield on the channel that can be used for general purposes. It
will be inherited by other channels the same way that linkedid is.
You can set tenantid in a few ways. The first is to set it in the
dialplan with the Set and CHANNEL functions:
exten => example,1,Set(CHANNEL(tenantid)=My tenant ID)
It can also be accessed via CHANNEL:
exten => example,2,NoOp(CHANNEL(tenantid))
Another method is to use the new tenantid option for pjsip endpoints in
pjsip.conf:
[my_endpoint]
type=endpoint
tenantid=My tenant ID
This is considered the best approach since you will be able to see the
tenant ID as early as the Newchannel event.
It can also be set using set_var in pjsip.conf on the endpoint like
setting other channel variable:
set_var=CHANNEL(tenantid)=My tenant ID
Note that set_var will not show tenant ID on the Newchannel event,
however.
Tenant ID has also been added to CDR. It's read-only and can be accessed
via CDR(tenantid). You can also get the tenant ID of the last channel
communicated with via CDR(peertenantid).
Tenant ID will also show up in CEL records if it has been set, and the
version number has been bumped accordingly.
Fixes: #740
UserNote: tenantid has been added to channels. It can be read in
dialplan via CHANNEL(tenantid), and it can be set using
Set(CHANNEL(tenantid)=My tenant ID). In pjsip.conf, it is recommended to
use the new tenantid option for pjsip endpoints (e.g., tenantid=My
tenant ID) so that it will show up in Newchannel events. You can set it
like any other channel variable using set_var in pjsip.conf as well, but
note that this will NOT show up in Newchannel events. Tenant ID is also
available in CDR and can be accessed with CDR(tenantid). The peer tenant
ID can also be accessed with CDR(peertenantid). CEL includes tenant ID
as well if it has been set.
UpgradeNote: A new versioned struct (ast_channel_initializers) has been
added that gets passed to __ast_channel_alloc_ap. The new function
ast_channel_alloc_with_initializers should be used when creating
channels that require the use of this struct. Currently the only value
in the struct is for tenantid, but now more fields can be added to the
struct as necessary rather than the __ast_channel_alloc_ap function. A
new option (tenantid) has been added to endpoints in pjsip.conf as well.
CEL has had its version bumped to include tenant ID.
A stasis event is now produced when using the TONE_DETECT dialplan
function. This event is published over ARI using the ChannelToneDetected
event. This change does not make it available over AMI.
Fixes: #811
UserNote: Setting the TONE_DETECT dialplan function on a channel
in ARI will now cause a ChannelToneDetected ARI event to be raised
when the specified tone is detected.
* Fixed a bug in crypto_show_cli_store that was causing asterisk
to crash if there were certificate revocation lists in the
verification certificate store. We're also now prefixing
certificates with "Cert:" and CRLs with "CRL:" to distinguish them
in the list.
* Added 'untrusted_cert_file' and 'untrusted_cert_path' options
to both verification and profile objects. If you have CRLs that
are signed by a different CA than the incoming X5U certificate
(indirect CRL), you'll need to provide the certificate of the
CRL signer here. Thse will show up as 'Untrusted" when showing
the verification or profile objects.
* Fixed loading of crl_path. The OpenSSL API we were using to
load CRLs won't actually load them from a directory, only a file.
We now scan the directory ourselves and load the files one-by-one.
* Fixed the verification flags being set on the certificate store.
- Removed the CRL_CHECK_ALL flag as this was causing all certificates
to be checked for CRL extensions and failing to verify the cert if
there was none. This basically caused all certs to fail when a CRL
was provided via crl_file or crl_path.
- Added the EXTENDED_CRL_SUPPORT flag as it is required to handle
indirect CRLs.
* Added a new CLI command...
`stir_shaken verify certificate_file <certificate_file> [ <profile> ]`
which will assist troubleshooting certificate problems by allowing
the user to manually verify a certificate file against either the
global verification certificate store or the store for a specific
profile.
* Updated the XML documentation and the sample config file.
Resolves: #809
This commit adds a new voicemail.conf option 'odbc_audio_on_disk'
which when set causes the ODBC variant of app_voicemail to leave
the message and greeting audio files on disk and only store the
message metadata in the database. This option came from a concern
that the database could grow to large and cause remote access
and/or replication to become slow. In a clustering situation
with this option, all asterisk instances would share the same
database for the metadata and either use a shared filesystem
or other filesystem replication service much more suitable
for synchronizing files.
The changes to app_voicemail to implement this feature were actually
quite small but due to the complexity of the module, the actual
source code changes were greater. They fall into the following
categories:
* Tracing. The module is so complex that it was impossible to
figure out the path taken for various scenarios without the addition
of many SCOPE_ENTER, SCOPE_EXIT and ast_trace statements, even in
code that's not related to the functional change. Making this worse
was the fact that many "if" statements in this module didn't use
braces. Since the tracing macros add multiple statements, many "if"
statements had to be converted to use braces.
* Excessive use of PATH_MAX. Previous maintainers of this module
used PATH_MAX to allocate character arrays for filesystem paths
and SQL statements as though they cost nothing. In fact, PATH_MAX
is defined as 4096 bytes! Some functions had (and still have)
multiples of these. One function has 7. Given that the vast
majority of installations use the default spool directory path
`/var/spool/asterisk/voicemail`, the actual path length is usually
less than 80 bytes. That's over 4000 bytes wasted. It was the
same for SQL statement buffers. A 4K buffer for statement that
only needed 60 bytes. All of these PATH_MAX allocations in the
ODBC related code were changed to dynamically allocated buffers.
The rest will have to be addressed separately.
* Bug fixes. During the development of this feature, several
pre-existing ODBC related bugs were discovered and fixed. They
had to do with leaving orphaned files on disk, not preserving
original message ids when moving messages between folders,
not honoring the "formats" config parameter in certain circumstances,
etc.
UserNote: This commit adds a new voicemail.conf option
'odbc_audio_on_disk' which when set causes the ODBC variant of
app_voicemail_odbc to leave the message and greeting audio files
on disk and only store the message metadata in the database.
Much more information can be found in the voicemail.conf.sample
file.
Add a queue option log-restricted-caller-id to strip the Caller ID when storing the ENTERQUEUE event
in the queue log if the Caller ID is restricted.
Resolves: #765
UpgradeNote: Add a new column to the queues table:
queue_log_option_log_restricted ENUM('0','1','off','on','false','true','no','yes')
to control whether the Restricted Caller ID will be stored in the queue log.
UserNote: Add a Queue option log-restricted-caller-id to control whether the Restricted Caller ID
will be stored in the queue log.
If log-restricted-caller-id=no then the Caller ID will be stripped if the Caller ID is restricted.
* Fixed possible memory leak in tn_config:tn_get_etn() where we
weren't releasing etn if tn or eprofile were null.
* We now canonicalize TNs before using them for lookups or adding
them to Identity headers.
* Fixed a typo in stir_shaken.conf.sample.
Resolves: #716
Add a new identify_by option to res_pjsip_endpoint_identifier_ip
called 'transport' this matches endpoints based on the bound
ip address (local) instead of the 'ip' option, which matches on
the source ip address (remote).
UserNote: set identify_by=transport for the pjsip endpoint. Then
use the existing 'match' option and the new 'transport' option of
the identify.
Fixes: #672
Add ability to match against PJSIP request URI.
UserNote: this new feature let users match endpoints based on the
indound SIP requests' URI. To do so, add 'request_uri' to the
endpoint's 'identify_by' option. The 'match_request_uri' option of
the identify can be an exact match for the entire request uri, or a
regular expression (between slashes). It's quite similar to the
header identifer.
Fixes: #599
This commit introduces configurable TCP keepalive settings for both TCP and TLS transports. The changes allow for finer control over TCP connection keepalives, enhancing stability and reliability in environments prone to connection timeouts or where intermediate devices may prematurely close idle connections. This has proven necessary and has already been tested in production in several specialized environments where access to the underlying transport is unreliable in ways invisible to the operating system directly, so these keepalive and timeout mechanisms are necessary.
Fixes#657
This adds an option to allow preventing callers from leaving
messages marked as 'urgent'.
Resolves: #619
UserNote: The leaveurgent mailbox option can now be used to
control whether callers may leave messages marked as 'Urgent'.
Why do we need a refactor?
The original stir/shaken implementation was started over 3 years ago
when little was understood about practical implementation. The
result was an implementation that wouldn't actually interoperate
with any other stir-shaken implementations.
There were also a number of stir-shaken features and RFC
requirements that were never implemented such as TNAuthList
certificate validation, sending Reason headers in SIP responses
when verification failed but we wished to continue the call, and
the ability to send Media Key(mky) grants in the Identity header
when the call involved DTLS.
Finally, there were some performance concerns around outgoing
calls and selection of the correct certificate and private key.
The configuration was keyed by an arbitrary name which meant that
for every outgoing call, we had to scan the entire list of
configured TNs to find the correct cert to use. With only a few
TNs configured, this wasn't an issue but if you have a thousand,
it could be.
What's changed?
* Configuration objects have been refactored to be clearer about
their uses and to fix issues.
* The "general" object was renamed to "verification" since it
contains parameters specific to the incoming verification
process. It also never handled ca_path and crl_path
correctly.
* A new "attestation" object was added that controls the
outgoing attestation process. It sets default certificates,
keys, etc.
* The "certificate" object was renamed to "tn" and had it's key
change to telephone number since outgoing call attestation
needs to look up certificates by telephone number.
* The "profile" object had more parameters added to it that can
override default parameters specified in the "attestation"
and "verification" objects.
* The "store" object was removed altogther as it was never
implemented.
* We now use libjwt to create outgoing Identity headers and to
parse and validate signatures on incoming Identiy headers. Our
previous custom implementation was much of the source of the
interoperability issues.
* General code cleanup and refactor.
* Moved things to better places.
* Separated some of the complex functions to smaller ones.
* Using context objects rather than passing tons of parameters
in function calls.
* Removed some complexity and unneeded encapsuation from the
config objects.
Resolves: #351Resolves: #46
UserNote: Asterisk's stir-shaken feature has been refactored to
correct interoperability, RFC compliance, and performance issues.
See https://docs.asterisk.org/Deployment/STIR-SHAKEN for more
information.
UpgradeNote: The stir-shaken refactor is a breaking change but since
it's not working now we don't think it matters. The
stir_shaken.conf file has changed significantly which means that
existing ones WILL need to be changed. The stir_shaken.conf.sample
file in configs/samples/ has quite a bit more information. This is
also an ABI breaking change since some of the existing objects
needed to be changed or removed, and new ones added. Additionally,
if res_stir_shaken is enabled in menuselect, you'll need to either
have the development package for libjwt v1.15.3 installed or use
the --with-libjwt-bundled option with ./configure.
Add patch to split the log level for invalid packets received on the
signaling port. The warning regarding the packet will move to level 2
so that it can still be displayed, while the raw packet will be at level
4.
This fixes a number of broken links throughout the
tree, mostly caused by wiki.asterisk.org being replaced
with docs.asterisk.org, which should eliminate the
need for sporadic fixes as in f28047db36.
Resolves: #430
This improves the documentation for the bandwidth setting
in iax.conf by making it clearer what the ramifications
of this setting are. It also changes the sample default
from low to high, since only high is compatible with good
codecs that people will want to use in the vast majority
of cases, and this is a common gotcha that trips up new users.
Resolves: #425
Internally, chan_dahdi only applies callgroup and
pickupgroup to FXO signalled channels, but this is
not documented anywhere. This is now documented in
the sample config, and a warning is emitted if a
user tries configuring these settings for channel
types that do not support these settings, since they
will not have any effect.
Resolves: #294
To better co-exist with sounds files that may be managed by
packages, custom sound files may now be placed in
AST_DATA_DIR/sounds/custom instead of the standard
AST_DATA_DIR/sounds/<lang> directory. If the new
"sounds_search_custom_dir" option in asterisk.conf is set
to "true", asterisk will search the custom directory for sounds
files before searching the standard directory. For performance
reasons, the "sounds_search_custom_dir" defaults to "false".
Resolves: #315
UserNote: A new option "sounds_search_custom_dir" has been added to
asterisk.conf that allows asterisk to search
AST_DATA_DIR/sounds/custom for sounds files before searching the
standard AST_DATA_DIR/sounds/<lang> directory.
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
UserNote: Introduce a new queue configuration option called
'periodic-announce-startdelay' which will vary the normal (historic)
behavior of starting the periodic announcement cycle at
periodic-announce-frequency seconds after entering the queue to start
the periodic announcement cycle at period-announce-startdelay seconds
after joining the queue. The default behavior if this config option is
not set remains unchanged.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
This adds support for Called Subscriber Held for FXS
lines, which allows users to go on hook when receiving
a call and resume the call later from another phone on
the same line, without disconnecting the call. This is
a convenience mechanism that most real PSTN telephone
switches support.
ASTERISK-30372 #close
Resolves: #240
UserNote: Called Subscriber Held is now supported for analog
FXS channels, using the calledsubscriberheld option. This allows
a station user to go on hook when receiving an incoming call
and resume from another phone on the same line by going on hook,
without disconnecting the call.
Added a new boolean configuration flag -
`order_multi_row_results_by_initial_column` - to both res_pgsql.conf
and res_config_odbc.conf that allows the administrator to disable the
explicit `ORDER BY` that was previously being added to all generated
SQL statements that returned multiple rows.
Fixes: #179
Currently, if an FXS channel is still off hook when
all calls on the line have hung up, the user is provided
reorder tone until going back on hook again.
In addition to not reflecting what most commercial switches
actually do, it's very common for switches to automatically
reoriginate for the user so that dial tone is provided without
the user having to depress and release the hookswitch manually.
This can increase convenience for users.
This behavior is now supported for kewlstart FXS channels.
It's supported only for kewlstart (FXOKS) mainly because the
behavior doesn't make any sense for ground start channels,
and loop start signalling doesn't provide the necessary DAHDI
event that makes this easy to implement. Likely almost everyone
is using FXOKS over FXOLS anyways since FXOLS is pretty useless
these days.
ASTERISK-30357 #close
Resolves: #224
UserNote: The autoreoriginate setting now allows for kewlstart FXS
channels to automatically reoriginate and provide dial tone to the
user again after all calls on the line have cleared. This saves users
from having to manually hang up and pick up the receiver again before
making another call.
sig_analog allows users to flash and use the three-way dial
tone as a primitive hold function, simply by never timing
it out.
Some systems allow this dial tone to time out to silence,
so the user is not annoyed by a persistent dial tone.
This option allows the dial tone to time out normally to
silence.
ASTERISK-30004 #close
Resolves: #205
UserNote: The threewaysilenthold option now allows the three-way
dial tone to time out to silence, rather than continuing forever.
c3ff4648 removed the [iaxtel700] context but neglected to remove
references to it.
This commit addresses that and also removes iaxtel and freeworlddialup
references from other config files.
This deprecates the users.conf config file, which
is no longer as widely supported but still integrated
with a number of different modules.
Because there is no real mechanism for marking a
configuration file as "deprecated", and users.conf
is not just used in a single place, this now emits
a warning to the user when the PBX loads to notify
about the deprecation.
This configuration mechanism has been widely criticized
and discouraged since its inception, and is no longer
relevant to the configuration that most users are doing
today. Removing it will allow for some simplification
and cleanup in the codebase.
Resolves: #183
UpgradeNote: The users.conf config is now deprecated
and will be removed in a future version of Asterisk.
When immediate=yes on an FXS channel, sig_analog will
start fake audible ringback that continues until the
channel is answered. Even if it answers immediately,
the ringback is still audible for a brief moment.
This can be disruptive and unwanted behavior.
This adds an option to disable this behavior, though
the default behavior remains unchanged.
ASTERISK-30003 #close
Resolves: #118
UserNote: The immediatering option can now be set to no to suppress
the fake audible ringback provided when immediate=yes on FXS channels.
This adds an option 'force_longest_waiting_caller' which changes the
global behavior of the queue engine to prevent queue callers from
'jumping ahead' when an agent is in multiple queues.
Resolves: #108
Also closes old asterisk issues:
- ASTERISK-17732
- ASTERISK-17570
Change-Id: I0f84e27903fefbe2018d0afa2d67b23aa0b321ce
Adds the loop_last option to res_musiconhold,
which allows the last audio file in the directory
to be looped perpetually once reached, rather than
circling back to the beginning again.
Resolves: #122
ASTERISK-30462
UserNote: The loop_last option in musiconhold.conf now
allows the last file in the directory to be looped once reached.
