This adds a dummy migration to 18 and 20 so that our alembic heads are
synchronized across all supported branches.
In this case the migration we are stubbing (24c12d8e9014) is:
775352ee6c
(cherry picked from commit d122225279)
The new mode lists for each codec translation the actual real cost in cpu microseconds per second translated audio.
This allows to compare the real cpu usage of translations and helps in evaluation of codec implementation changes regarding performance (regression testing).
- add new table mode
- hide the 999999 comp values, as these only indicate an issue with transcoding
- hide the 0 values, as these also do not contain any information (only indicate a multistep transcoding)
Resolves: #601
(cherry picked from commit a47acba99b)
If a dynamic string is created with an initial length of 0,
`ast_str_buffer(…)` will return an invalid pointer.
This was a secondary discovery when fixing #65.
(cherry picked from commit 31fc2877cb)
Media Experience Score relies on incorrect pseudo_mos variable
calculation. According to forming an opinion section of the
documentation, calculation relies on ITU-T G.107 standard:
https://docs.asterisk.org/Deployment/Media-Experience-Score/#forming-an-opinion
ITU-T G.107 Annex B suggests to calculate MOS with a coefficient
"seven times ten to the power of negative six", 7 * 10^(-6). which
would mean 6 digits after the decimal point. Current implementation
has 7 digits after the decimal point, which downrates the calls.
Fixes: #597
(cherry picked from commit 335b925fac)
If ast_dsp_process is called with a codec besides slin, ulaw,
or alaw, a warning is logged that in-band DTMF is not supported,
but this message is not always appropriate or correct, because
ast_dsp_process is much more generic than just DTMF detection.
This logs a more generic message in those cases, and also improves
codec-mismatch logging throughout dsp.c by ensuring incompatible
codecs are printed out.
Resolves: #595
(cherry picked from commit 59df4892ad)
Under rare circumstances, it's possible for the original audio
session in the active_media_state default_session to be corrupted
instead of removed when switching to the t38/image media session
during fax negotiation. This can cause a segfault when a "pjsip
show channelstats" attempts to print that audio media session's
rtp statistics. In these cases, the active_media_state
topology is correctly showing only a single t38/image stream
so we now check that there's an audio stream in the topology
before attempting to use the audio media session to get the rtp
statistics.
Resolves: #592
(cherry picked from commit cb057a6381)
When started with a verbose level of 3, asterisk can emit over 1500
verbose message that serve no real purpose other than to fill up
logs. When asterisk shuts down, it emits another 1100 that are of
even less use. Since the testsuite runs asterisk with a verbose
level of 3, and asterisk starts and stops for every one of the 700+
tests, the number of log messages is staggering. Besides taking up
resources, it also makes it hard to debug failing tests.
This commit changes the log level for those verbose messages to 5
instead of 3 which reduces the number of log messages to only a
handful. Of course, NOTICE, WARNING and ERROR message are
unaffected.
There's also one other minor change...
ast_context_remove_extension_callerid2() logs a DEBUG message
instead of an ERROR if the extension you're deleting doesn't exist.
The pjsip_config_wizard calls that function to clean up the config
and has been triggering that annoying error message for years.
Resolves: #582
(cherry picked from commit a433ed0d5a)
The last time configure was run, it was run on a system that
did not enable -std=gnu11 by default, which meant that the
restrict qualifier would not be recognized on certain platforms.
This regenerates the configure files from running bootstrap.sh,
so that these should be recognized on all supported platforms.
Resolves: #586
(cherry picked from commit 54b804fc3b)
Fixes: #406
UserNote: Bundled pjproject has been upgraded to 2.14. For more
information on what all is included in this change, check out the
pjproject Github page: https://github.com/pjsip/pjproject/releases
(cherry picked from commit bbfaff33cf)
Adds 'p' option to SpeechBackground() application.
With this option, when the app timeout is reached,
whatever the backend speech engine collected will
be returned as if it were the final, full result.
(This works for engines that make partial results.)
Resolves: #572
UserNote: The SpeechBackground dialplan application now supports a 'p'
option that will return partial results from speech engines that
provide them when a timeout occurs.
(cherry picked from commit 63b5a03538)
Given the scenario of passing an empty string to the
ast_strsep functions the functions would return NULL
instead of an empty string. This is counter to how
strsep itself works.
This change alters the behavior of the functions to
match that of strsep.
Fixes: #565
(cherry picked from commit 167d393c0f)
Adds the 'D' option to app chanspy that causes the input and output
frames of the spied channel to be interleaved in the spy output frame.
This allows the input and output of the spied channel to be decoded
separately by the receiver.
If the 'o' option is also set, the 'D' option is ignored as the
audio being spied is inherently one direction.
Fixes: #569
UserNote: The ChanSpy application now accepts the 'D' option which
will interleave the spied audio within the outgoing frames. The
purpose of this is to allow the audio to be read as a Dual channel
stream with separate incoming and outgoing audio. Setting both the
'o' option and the 'D' option and results in the 'D' option being
ignored.
(cherry picked from commit 0d17ee6930)
Need to update the github-script to v7 to squash deprecation
warnings.
Also fixed the API name for github.rest.pulls.requestReviewers.
(cherry picked from commit 0f3f0f3529)
Commit fa3922a4d2 fixed
a branching issue but "overshoots" when calculating
the next priority. This fixes that; accompanying
test suite tests have also been extended.
Resolves: #560
(cherry picked from commit 64f9df5e59)
Resolves a regression identified by @justinludwig involving the
rendering of IPv6 addresses in outgoing SDP.
Also updates `media_address` on PJSIP endpoints so that if we are able
to parse the configured value as an IP we store it in a format that we
can directly use later. Based on my reading of the code it appeared
that one could configure `media_address` as:
```
[foo]
type = endpoint
...
media_address = [2001:db8::]
```
And that value would be blindly copied into the outgoing SDP without
regard to its format.
Fixes#541
(cherry picked from commit 0fdaf7fc80)
Currently, a reload will always occur if the
Reload header is provided for the UpdateConfig
action. However, we should not be doing a reload
if the header value has a falsy value, per the
documentation, so this makes the reload behavior
consistent with the existing documentation.
Resolves: #551
(cherry picked from commit d50d981543)
The numeric bridge profile options `internal_sample_rate` and
`maximum_sample_rate` are documented to accept the special values
`auto` and `none`, respectively. While these values currently work,
they also emit warnings when used which could be confusing for users.
In passing, also ensure that we only accept the documented range of
sample rate values between 8000 and 192000.
Fixes#546
(cherry picked from commit f541f8d8c4)
Adding a NoOp alembic script for the voicemail database to maintain
version sync with other branches.
Fixes: #527
(cherry picked from commit f5d622413a)
This adds a CLI command to manually toggle the MWI status
of a channel, useful for troubleshooting or resetting
MWI devices, similar to the capabilities offered with
SIP messaging to manually control MWI status.
UserNote: The 'dahdi set mwi' now allows MWI on channels
to be manually toggled if needed for troubleshooting.
Resolves: #440
(cherry picked from commit f17910ded5)
This adds a simple CLI command that can be used for
analyzing all frames currently queued to a channel.
A couple log messages are also adjusted to be more
useful in tracing bridging problems.
Resolves: #533
(cherry picked from commit d075a08d7e)
Commit 008731b0a4
caused a regression by resulting in logger.xml
being compiled and linked into the asterisk
binary in lieu of logger.c on certain platforms
if Asterisk was compiled in dev mode.
To fix this, we ensure the file has a unique
name without the extension. Most existing .xml
files have been named differently from any
.c files in the same directory or did not
pose this issue.
channels/pjsip/dialplan_functions.xml does not
pose this issue but is also being renamed
to adhere to this policy.
Resolves: #539
This reverts commit 315eb551db.
Over the past year, we've had several reports of "topology storms"
occurring where 2 external facing channels connected by one or more
local channels and bridges will get themselves in a state where
they continually send each other topology change requests. This
usually manifests itself in no-audio calls and a flood of
"Exceptionally long queue length" messages. It appears that this
commit is the cause so we're reverting it for now until we can
determine a more appropriate solution.
Resolves: #530
(cherry picked from commit 4715c1b11c)
Instead of using the same error message for
missing dependencies and conflicts, be specific
about what actually went wrong.
Resolves: #520
(cherry picked from commit f22f49e77a)
The ast_sip_request_transport_details must be zero initialized,
otherwise this could lead to a SEGV.
Resolves: #509
(cherry picked from commit 3e069f3274)
This fixes faulty branching logic for the
EndIf application. Instead of computing
the next priority, which should be done
for false conditionals or ExitIf, we should
simply advance to the next priority.
Resolves: #341
(cherry picked from commit 83a0cb51e5)
Commit 424be34563 introduced
a regression by calling ast_free on memory allocated by
realpath. This causes Asterisk to abort when executing this
function. Since the memory is allocated by glibc, it should
be freed using ast_std_free.
Resolves: #513
(cherry picked from commit b9ed57092f)
This increases the format width of option descriptions
to avoid needless truncation for longer descriptions.
Resolves: #428
(cherry picked from commit fcf36a8766)
Improve the "manager show connected" CLI command
to clarify that the last two columns are permissions
related, not counts, and use sufficient widths
to consistently display these values.
ASTERISK-30143 #close
Resolves: #482
(cherry picked from commit bc53a2a087)
Although `make_xml_documentation`'s `print_dependencies` command was
corrected by the previous fix (#461) for #142, the `create_xml` was
not properly handling `LOCAL_MOD_SUBDIRS` XML documentation.
(cherry picked from commit 91c733bc69)
This fixes a number of broken links throughout the
tree, mostly caused by wiki.asterisk.org being replaced
with docs.asterisk.org, which should eliminate the
need for sporadic fixes as in f28047db36.
Resolves: #430
(cherry picked from commit 8f5581b0d0)
Resolves: #462
UserNote: The option "j" is now available for the Dial application which
uses the initial stream topology of the caller to create the outgoing
channels.
(cherry picked from commit dcf58ee88f)
Instead of searching for the asterisk binary and the modules in the
filesystem, we now get their locations, along with libdir, from
the coredump itself...
For the binary, we can use `gdb -c <coredump> ... "info proc exe"`.
gdb can print this even without having the executable and symbols.
Once we have the binary, we can get the location of the modules with
`gdb ... "print ast_config_AST_MODULE_DIR`
If there was no result then either it's not an asterisk coredump
or there were no symbols loaded. Either way, it's not usable.
For libdir, we now run "strings" on the note0 section of the
coredump (which has the shared library -> memory address xref) and
search for "libasteriskssl|libasteriskpj", then take the dirname.
Since we're now getting everything from the coredump, it has to be
correct as long as we're not crossing namespace boundaries like
running asterisk in a docker container but trying to run
ast_coredumper from the host using a shared file system (which you
shouldn't be doing).
There is still a case for using --asterisk-bin and/or --libdir: If
you've updated asterisk since the coredump was taken, the binary,
libraries and modules won't match the coredump which will render it
useless. If you can restore or rebuild the original files that
match the coredump and place them in a temporary directory, you can
use --asterisk-bin, --libdir, and a new --moddir option to point to
them and they'll be correctly captured in a tarball created
with --tarball-coredumps. If you also use --tarball-config, you can
use a new --etcdir option to point to what normally would be the
/etc/asterisk directory.
Also addressed many "shellcheck" findings.
Resolves: #445
(cherry picked from commit 44f1522907)
The `get_documentation` awk script will only extract the first
DOCUMENTATION block that it finds in a given file. This is by design
(9bc2127) to prevent AMI event documentation from being pulled in to
the core.xml documentation file.
Because of this, the `LOG_GROUP` documentation added in 89709e2 was
not being properly extracted and was missing fom the resulting XML
documentation file. This commit moves the `LOG_GROUP` documentation to
a separate `logger.xml` file.
(cherry picked from commit 0b6e3bc59b)
There are valid scenarios where res_odbc's connection pool might have some dead
or stuck connections while others are healthy (imagine network
elements/firewalls/routers silently timing out connections to a single DB and a
single IP address, or a heterogeneous connection pool connected to potentially
multiple IPs/instances of a replicated DB using a DNS front end for load
balancing and one replica fails).
In order to time out those unhealthy connections without blocking access to
other parts of Asterisk that may attempt access to the connection pool, it would
be beneficial to not lock/block access around the entire pool in
_ast_odbc_request_obj2 while doing potentially blocking operations on connection
pool objects such as the connection_dead() test, odbc_obj_connect(), or by
dereferencing a struct odbc_obj for the last time and triggering a
odbc_obj_disconnect().
This would facilitate much quicker and concurrent timeout of dead connections
via the connection_dead() test, which could block potentially for a long period
of time depending on odbc.ini or other odbc connector specific timeout settings.
This also would make rapid failover (in the clustered DB scenario) much quicker.
This patch changes the locking in _ast_odbc_request_obj2() to not lock around
odbc_obj_connect(), _disconnect(), and connection_dead(), while continuing to
lock around truly shared, non-immutable state like the connection_cnt member and
the connections list on struct odbc_class.
Fixes: #465
(cherry picked from commit bfac3945f6)
If the script referenced by `#exec` does not exist, writes anything to
stderr, or exits abnormally or with a non-zero exit status, we log
that to Asterisk's error logging channel.
Additionally, write out a warning if the script produces no output.
Fixes#259
(cherry picked from commit 4327ec2907)
