* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
The unit test XML output was counting all registered tests as "run"
even when only a subset were actually requested to be run and
the "failures" attribute was missing.
* The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
* The "failures" attribute was added to the "testsuite"
element.
Also added 2 new unit tests that just pass and fail to be
used for CI testing.
Change-Id: Ia137814b5aeb0e1a44c75034bd3615c26021da69
While it is possible to create multiple mixmonitor instances
on a channel, it was not previously possible to mute individual
instances.
This change includes the ability to specify the MixMonitorID
when calling the manager action: MixMonitorMute. This will
allow an individual MixMonitor instance to be muted via id.
This id can be stored as a channel variable using the 'i'
MixMonitor option.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor spy-type audiohooks on the channel.
This is done via the new audiohook function:
ast_audiohook_set_mute_all.
ASTERISK-30464
Change-Id: Ibba8c7e750577aa1595a24b23316ef445245be98
Add periodic beep option to one-touch recording by setting
the touch variable TOUCH_MONITOR_BEEP or
TOUCH_MIXMONITOR_BEEP to the desired interval in seconds.
If the interval is less than 5 seconds, a minimum of 5
seconds will be imposed. If the interval is set to an
invalid value, it will default to 15 seconds.
A new test event PERIODIC_HOOK_ENABLED was added to the
func_periodic_hook hook_on function to indicate when
a hook is started. This is so we can test that the touch
variable starts the hook as expected.
ASTERISK-30446
Change-Id: I800e494a789ba7a930bbdcd717e89d86040d6661
For 'core show channels', the Channel name field is increased
to 64 characters and the Location name field is increased to
32 characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
ASTERISK-30455
Change-Id: Ibec3742ce360ffc93bc56e9984c2a21dabc4d5e1
Adds a new option to SendDTMF() which will answer the specified
channel if it is not already up. If no channel is specified, the
current channel will be answered instead.
ASTERISK-30422
Change-Id: Iddcbd501fcdf9fef0f453b7a8115a90b11f1d085
(cherry picked from commit f015d3e0cc)
Adds 's' option to skip calling the extension and instead set the
extension as DIRECTORY_EXTEN channel variable.
ASTERISK-30405
Change-Id: Ib9d9db1ba5b7524594c640461b4aa8f752db8299
Adds 'e' option to allow Read() to return the terminator as the
dialed digits in the case where only the terminator is entered.
ie; if "#" is entered, return "#" if the 'e' option is set and ""
if it is not.
ASTERISK-30411
Change-Id: I49f3221824330a193a20c660f99da0f1fc2cbbc5
Add live_dangerously flag to manager and use this flag to
determine if a configuation file outside of AST_CONFIG_DIR
should be read.
ASTERISK-30176
Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404
Adding user=phone to local-side uri's when user_eq_phone=yes is set for
an endpoint. Previously this would only add the header to the To and R-URI.
ASTERISK-30178
Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600
Added an 'a' option to the GEOLOC_PROFILE function to allow
variable lists like location_info_refinement to be appended
to instead of replacing the entire list.
Added an 'r' option to the GEOLOC_PROFILE function to resolve all
variables before a read operation and after a Set operation.
Added a few missing parameters to the ones allowed for writing
with GEOLOC_PROFILE.
Fixed a bug where calling GEOLOC_PROFILE to read a parameter
might actually update the profile object.
Cleaned up XML documentation a bit.
ASTERISK-30190
Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
The trigger to perform outgoing geolocation processing is the
presence of a geoloc_outgoing_call_profile on an endpoint. This
is intentional so as to not leak location information to
destinations that shouldn't receive it. In a totally dynamic
configuration scenario however, there may not be any profiles
defined in geolocation.conf. This makes it impossible to do
outgoing processing without defining a "dummy" profile in the
config file.
This commit adds 4 built-in profiles:
"<prefer_config>"
"<discard_config>"
"<prefer_incoming>"
"<discard_incoming>"
The profiles are empty except for having their precedence
set and can be set on an endpoint to allow processing without
entries in geolocation.conf. "<discard_config>" is actually the
best one to use in this situation.
ASTERISK-30182
Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Some databases depending on their configuration using backslashes
for escaping. When combined with the use of ' this can result in
a broken func_odbc query.
This change adds a SQL_ESC_BACKSLASHES dialplan function which can
be used to escape the backslashes.
This is done as a dialplan function instead of being always done
as some databases do not require this, and always doing it would
result in incorrect data being put into the database.
ASTERISK-29838
Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d
Makes basic call progress tone detection available
in a tech-agnostic manner with the addition of the
ToneScan application. This can determine if the channel
has encountered a busy signal, SIT tones, dial tone,
modem, fax machine, etc. A few basic async progress
tone detect options are also added to the TONE_DETECT
function.
ASTERISK-29720 #close
Change-Id: Ia02437e0450473031e294798b8cb421fb8f24e90
Historically, the dial syntax for IAX2 has held that
an outkey (used only for RSA authenticated calls)
and a secret (used only for plain text and MD5 authenticated
calls, historically) were mutually exclusive, and thus
the same position in the dial string was used for both
values.
Now that encryption is possible with RSA authentication,
this poses a limitation, since encryption requires a
secret and RSA authentication requires an outkey. Thus,
the dial syntax is extended so that both a secret and
an outkey can be specified.
The new extended syntax is backwards compatible with the
old syntax. However, a secret can now be specified after
the outkey, or the outkey can be specified after the secret.
This makes it possible to spawn an encrypted RSA authenticated
call without a corresponding peer being predefined in iax.conf.
ASTERISK-29707 #close
Change-Id: I1f8149313ed760169d604afbb07720a8b07dd00e
The search for a running asterisk when --running is used
has been greatly simplified and in the event it doesn't
work, you can now specify a pid to use on the command
line with --pid.
The search for asterisk modules when --tarball-coredumps
is used has been enhanced to have a better chance of finding
them and in the event it doesn't work, you can now specify
--libdir on the command line to indicate the library directory
where they were installed.
The DATEFORMAT variable was renamed to DATEOPTS and is now
passed to the 'date' utility rather than running DATEFORMAT
as a command.
The coredump and output files are now renamed with DATEOPTS.
This can be disabled by specifying --no-rename.
Several confusing and conflicting options were removed:
--append-coredumps
--conffile
--no-default-search
--tarball-uniqueid
The script was re-structured to make it easier for follow.
Change-Id: I674be64bdde3ef310b6a551d4911c3b600ffee59
The stir_shaken configuration option now has 4 different choices to pick
from: off, attest, verify, and on. Off and on behave the same way they
do now. Attest will only perform attestation on the endpoint, and verify
will only perform verification on the endpoint.
Certain responses are required to be sent based on certain conditions
for STIR/SHAKEN. For example, if we get a Date header that is outside of
the time range that is considered valid, a 403 Stale Date response
should be sent. This and several other responses have been added.
Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7
Add a time_t logintime to storage a time when a member is added into a
queue.
Also, includes show this time (in seconds) using a 'queue show' command
and the field LoginTime for response for AMI events.
ASTERISK-18069 #close
Change-Id: Ied6c3a300f78d78eebedeb3e16a1520fc3fff190
I am adding a mix option that will play by filename and say.conf unlike
say option that will only play with say.conf. It
will look on the format of the name, if it is like say it play with
say.conf if not it will play the file name.
ASTERISK-29662
Change-Id: I815816916a308f0fa8f165140dc15772dcbd547a
Adds support for encryption to RSA-authenticated
calls. Also prevents crashes if an RSA IAX2 call
is initiated to a switch requiring encryption
but no secret is provided.
ASTERISK-20219
Change-Id: I18f1f9d7c59b4f9cffa00f3b94a4c875846efd40
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
The MessageSend AMI action has been updated to allow the Destination
and the To addresses to be provided separately. This brings the
MessageSend manager command in line with the capabilities of the
MessageSend dialplan application.
ASTERISK-29663 #close
Change-Id: I8513168d3e189a9fed88aaab6f5547ccb50d332c
Adds a function to check for the existence of a channel by
name or by UNIQUEID.
ASTERISK-29656 #close
Change-Id: Ib464e9eb6e13dc683a846286798fecff4fd943cb
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
Adds a SendMF application and PlayMF manager
event to send arbitrary R1 MF tones on the
current or specified channel.
ASTERISK-29496
Change-Id: I5d89afdbccee3f86cc702ed96d882f3d351327a4
Adds the STRBETWEEN function, which can be used to insert a
substring between each character in a string. For instance,
this can be used to insert pauses between DTMF tones in a
string of digits.
ASTERISK-29627
Change-Id: Ice23009d4a8e9bb9718d2b2301d405567087d258
Adds the DIRNAME and BASENAME functions, which are
wrappers around the corresponding C library functions.
These can be used to safely and conveniently work with
file paths and names in the dialplan.
ASTERISK-29628 #close
Change-Id: Id3aeb907f65c0ff96b6e57751ff0cb49d61db7f3
Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.
This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.
Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.
ASTERISK-29531
Change-Id: If9718c89353b8e153d84add3cc4637b79585db19
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
There is an option to silence voicemail instructions but it does not
take into consideration if a recorded greeting exists or not. Add a
new 'S' option that does that.
ASTERISK-29632 #close
Change-Id: I03f2f043a9beb9d99deab302247e2a8686066fb4
Adds an information element for ANI2 so that
Originating Line Information can be transmitted
over IAX2 channels.
ASTERISK-29605 #close
Change-Id: Iaeacdf6ccde18eaff7f776a0f49fee87dcb549d2
Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.
ASTERISK-18454 #close
Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b
This allows the STUN server to change its IP address without having to
reload the res_rtp_asterisk module.
The refresh of the name resolution occurs first when the module is
loaded, then recurringly, slightly after the previous DNS answer TTL
expires.
ASTERISK-29508 #close
Change-Id: I7955a046293f913ba121bbd82153b04439e3465f
