The current TCP client connect code, blocks and does not handle EINTR
error case.
This patch makes the client socket non-blocking while connecting,
ensures a connect does not immediately fail due to EINTR "errors",
and adds a connect timeout option.
The original client start call sets the new timeout option to
"infinite", thus making sure old, orginal behavior is retained.
ASTERISK-29746 #close
Change-Id: I907571843a83e43c0742b95a64785f4411f02671
Adds tech-agnostic support for SF signaling
by adding SF sender and receiver applications
as well as Dial integration.
ASTERISK-29802 #close
Change-Id: I7ec50752e9a661af639425e5d1e339f17411bcad
Previously, it was only possible to have one HTTP server in Asterisk.
With this patch it is now possible to have multiple HTTP servers
listening on different addresses.
Note, this behavior has only been made available through an API call
from within the TEST_FRAMEWORK. Specifically, this feature has been
added in order to allow unit test to create/start and stop servers,
if one has not been enabled through configuration.
Change-Id: Ic5fb5f11e62c019a1c51310f4667b32a4dae52f5
The enum values for ast_strsep_flags includes
AST_STRSEP_STRIP. However, some comments reference
AST_SEP_STRIP, which doesn't exist. This fixes
these comments to use the correct value.
ASTERISK-29800 #close
Change-Id: If7bbd0c0e6226a211d25ddf9d1629347e2674943
Currently, variable substitution involving dialplan
extensions is quite clunky since it entails obtaining
the current dialplan location, backing it up, storing
the desired variables for substitution on the channel,
performing substitution, then restoring the original
location.
In addition to being clunky, things could also go wrong
if an async goto were to occur and change the dialplan
location during a substitution.
Fundamentally, there's no reason it needs to be done this
way, so new API is added to allow for directly passing in
the dialplan location for the purposes of variable
substitution so we don't need to mess with the channel
information anymore. Existing API is not changed.
ASTERISK-29745 #close
Change-Id: I23273bf27fa0efb64a606eebf9aa8e2f41a065e4
Adds tech-agnostic support for MF signaling by adding
MF sender and receiver applications as well as Dial
integration.
ASTERISK-29496-mf #do-not-close
Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4
Since Doxygen 1.8.16, a special comment block is required. Otherwise
(pure C comment), the group command is ignored. Additionally, several
unbalanced group commands were fixed.
ASTERISK-29732
Change-Id: I4687857b9d56e6f44fd440b73af156691660202e
Refactors generic functions used for email generation
into utils.c so that they can be used by multiple
modules, including app_voicemail and app_minivm,
to avoid code duplication.
ASTERISK-29715 #close
Change-Id: I1de0ed3483623e9599711129edc817c45ad237ee
This avoids a few long-name overflows, at the cost of less instructive
names in the case of C++ (specifically overloaded functions and class
methods). This in turn is offset against the fact that we're logging
the filename and line numbers in any case.
Change-Id: I54101a0bb5f8cb9ef63ec12c5e0d4c8edafff9ed
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
Fixes four misuses of the parameter 'name'. Additionally, for
consistency and to avoid such an issue in future, those few other
places, which used '\file name', were changed just to '\file'. Then,
Doxygen uses the name of the current file.
ASTERISK-29733
Change-Id: I0c18b4c863c6988b138c77448057349a9ee7052d
Add a function to check if there is an exact match a one string between
delimiters in another string.
Add a function that will create an ast_json object out of a list of
Asterisk variables. An excludes string can also optionally be passed
in.
Also, add a macro to make it easier to get object integers.
Change-Id: I5f34f18e102126aef3997f19a553a266d70d6226
The stir_shaken configuration option now has 4 different choices to pick
from: off, attest, verify, and on. Off and on behave the same way they
do now. Attest will only perform attestation on the endpoint, and verify
will only perform verification on the endpoint.
Certain responses are required to be sent based on certain conditions
for STIR/SHAKEN. For example, if we get a Date header that is outside of
the time range that is considered valid, a 403 Stale Date response
should be sent. This and several other responses have been added.
Change-Id: I4ac1ecf652cd0e336006b0ca638dc826b5b1ebf7
Add a new function that converts a speech results type to a string.
Also add another function to unregister an engine, but returns a
pointer to the unregistered engine object instead of a success/fail
integer.
Change-Id: I0f7de17cb411021c09fb03988bc2b904e1380192
OpenSSL is one of those packages that often have alternatives
with later versions. For instance, CentOS/EL 7 has an
openssl package at version 1.0.2 but there's an openssl11
package from the epel repository that has 1.1.1. This gets
installed to /usr/include/openssl11 and /usr/lib64/openssl11.
Unfortunately, the existing --with-ssl and --with-crypto
./configure options expect to point to a source tree and
don't work in this situation. Also unfortunately, the
checks in ./configure don't use pkg-config.
In order to make this work with the existing situation, you'd
have to run...
./configure --with-ssl=/usr/lib64/openssl11 \
--with-crypto=/usr/lib64/openssl11 \
CFLAGS=-I/usr/include/openssl11
BUT... those options don't get passed down to bundled pjproject
so when you run make, you have to include the CFLAGS again
which is a big pain.
Oh... To make matters worse, although you can specify
PJPROJECT_CONFIGURE_OPTS on the ./configure command line,
they don't get saved so if you do a make clean, which will
force a re-configure of bundled pjproject, those options
don't get used.
So...
* In configure.ac... Since pkg-config is installed by install_prereq
anyway, we now use it to check for the system openssl >= 1.1.0.
If that works, great. If not, we check for the openssl11
package. If that works, great. If not, we fall back to just
checking for any openssl. If pkg-config isn't installed for some
reason, or --with-ssl=<dir> or --with-crypto=<dir> were specified
on the ./configure command line, we fall back to the existing
logic that uses AST_EXT_LIB_CHECK().
* The whole OpenSSL check process has been moved up before
THIRD_PARTY_CONFIGURE(), which does the initial pjproject
bundled configure, is run. This way the results of the above
checks, which may result in new include or library directories,
is included.
* Although not strictly needed for openssl, We now save the value of
PJPROJECT_CONFIGURE_OPTS in the makeopts file so it can be used
again if a re-configure is triggered.
ASTERISK-29693
Change-Id: I341ab7603e6b156aa15a66f43675ac5029d5fbde
Discovered while looking at ASTERISK~29684. Usage was removed in change
I3c77c7b00b2ffa2e935632097fa057b9fdf480c0.
Change-Id: Iaf2f7a16ea5a7eee6375319347e4b40b8e7b10e3
In res_pjsip_sdp_rtp, the bind_rtp_to_media_address option and the
fallback use of the transport's bind address solve problems sending
media on systems that cannot send ipv4 packets on ipv6 sockets, and
certain other situations. This change extends both of these behaviors
to UDPTL sessions as well in res_pjsip_t38, to fix fax-specific
problems on these systems, introducing a new option
endpoint/t38_bind_udptl_to_media_address.
ASTERISK-29402
Change-Id: I87220c0e9cdd2fe9d156846cb906debe08c63557
The behavior of max_contacts and remove_existing are connected. If
remove_existing is enabled, the soonest expiring contacts are removed.
This may occur when there is an unavailable contact. Similarly,
when remove_existing is not enabled, registrations from good
endpoints are rejected in favor of retaining unavailable contacts.
This commit adds a new AOR option remove_unavailable, and the effect
of this setting will depend on remove_existing. If remove_existing
is set to no, we will still remove unavailable contacts when they
exceed max_contacts, if there are any. If remove_existing is set to
yes, we will prioritize the removal of unavailable contacts before
those that are expiring soonest.
ASTERISK-29525
Change-Id: Ia2711b08f2b4d1177411b1be23e970d7fdff5784
Adds the ability for users to log to custom log levels
by providing custom log level names in logger.conf. Also
adds a logger show levels CLI command.
ASTERISK-29529
Change-Id: If082703cf81a436ae5a565c75225fa8c0554b702
Adds parsing of ANI II digits (Originating
Line Information) to PJSIP, on par with
what currently exists in chan_sip.
ASTERISK-29472
Change-Id: Ifc938a7a7d45ce33999ebf3656a542226f6d3847
Up until now, all of the logic used to translate
arguments to the Say applications has been
directly coupled to playback, preventing other
modules from using this logic.
This refactors code in say.c and adds a SAYFILES
function that can be used to retrieve the file
names that would be played. These can then be
used in other applications or for other purposes.
Additionally, a SayMoney application and a SayOrdinal
application are added. Both SayOrdinal and SayNumber
are also expanded to support integers greater than
one billion.
ASTERISK-29531
Change-Id: If9718c89353b8e153d84add3cc4637b79585db19
dsp.c contains arbitrary tone detection functionality
which is currently only used for fax tone recognition.
This change makes this functionality publicly
accessible so that other modules can take advantage
of this.
Additionally, a WaitForTone and TONE_DETECT app and
function are included to allow users to do their
own tone detection operations in the dialplan.
ASTERISK-29546
Change-Id: Ie38c395000f4fd4d04e942e8658e177f8f499b26
IPv6 nameserver addresses are stored in different part of the
__res_state structure, so look there if we appear to have support for
it.
ASTERISK-28004 #close
Change-Id: I67067077d8a406ee996664518d9c8fbf11f6977d
Allows for the digit # to be read as a digit,
just like any other DTMF digit, as opposed to
forcing it to be used as an end of input
indicator. The default behavior remains
unchanged.
ASTERISK-18454 #close
Change-Id: I3033432adb9d296ad227e76b540b8b4a2417665b
Meter types are not well supported,
lacking support in telegraf, datadog and the official statsd servers.
We deprecate meters and provide a compliant fallback for any existing usages.
A flag has been introduced to allow meters to fallback to counters.
ASTERISK-29513
Change-Id: I5fcb385983a1b88f03696ff30a26b55c546a1dd7
When we try to play a list of sound files in the same Play command,
we get only one PlaybackFinish event, after all sounds are played.
But in the case where the Play fails (because channel is destroyed
for example), Asterisk will send one PlaybackFinish event for each
sound file still to be played. If the list is big, Asterisk is
sending many events.
This patch adds a failed state so we can understand that the play
failed. On that case we don't send the event, if we still have a
list of sounds to be played.
When we reach the last sound, we send the PlaybackFinish with
the failed state.
ASTERISK-29464 #close
Change-Id: I4c2e5921cc597702513af0d7c6c2c982e1798322
