* Fixed possible memory leak in tn_config:tn_get_etn() where we
weren't releasing etn if tn or eprofile were null.
* We now canonicalize TNs before using them for lookups or adding
them to Identity headers.
* Fixed a typo in stir_shaken.conf.sample.
Resolves: #716
(cherry picked from commit b7ed77a7c5)
Add a new identify_by option to res_pjsip_endpoint_identifier_ip
called 'transport' this matches endpoints based on the bound
ip address (local) instead of the 'ip' option, which matches on
the source ip address (remote).
UserNote: set identify_by=transport for the pjsip endpoint. Then
use the existing 'match' option and the new 'transport' option of
the identify.
Fixes: #672
(cherry picked from commit c8769f3d5a)
Add ability to match against PJSIP request URI.
UserNote: this new feature let users match endpoints based on the
indound SIP requests' URI. To do so, add 'request_uri' to the
endpoint's 'identify_by' option. The 'match_request_uri' option of
the identify can be an exact match for the entire request uri, or a
regular expression (between slashes). It's quite similar to the
header identifer.
Fixes: #599
(cherry picked from commit ac297d15f8)
This commit introduces configurable TCP keepalive settings for both TCP and TLS transports. The changes allow for finer control over TCP connection keepalives, enhancing stability and reliability in environments prone to connection timeouts or where intermediate devices may prematurely close idle connections. This has proven necessary and has already been tested in production in several specialized environments where access to the underlying transport is unreliable in ways invisible to the operating system directly, so these keepalive and timeout mechanisms are necessary.
Fixes#657
(cherry picked from commit 555eb9d3d2)
This adds an option to allow preventing callers from leaving
messages marked as 'urgent'.
Resolves: #619
UserNote: The leaveurgent mailbox option can now be used to
control whether callers may leave messages marked as 'Urgent'.
(cherry picked from commit 190b6eafb3)
Why do we need a refactor?
The original stir/shaken implementation was started over 3 years ago
when little was understood about practical implementation. The
result was an implementation that wouldn't actually interoperate
with any other stir-shaken implementations.
There were also a number of stir-shaken features and RFC
requirements that were never implemented such as TNAuthList
certificate validation, sending Reason headers in SIP responses
when verification failed but we wished to continue the call, and
the ability to send Media Key(mky) grants in the Identity header
when the call involved DTLS.
Finally, there were some performance concerns around outgoing
calls and selection of the correct certificate and private key.
The configuration was keyed by an arbitrary name which meant that
for every outgoing call, we had to scan the entire list of
configured TNs to find the correct cert to use. With only a few
TNs configured, this wasn't an issue but if you have a thousand,
it could be.
What's changed?
* Configuration objects have been refactored to be clearer about
their uses and to fix issues.
* The "general" object was renamed to "verification" since it
contains parameters specific to the incoming verification
process. It also never handled ca_path and crl_path
correctly.
* A new "attestation" object was added that controls the
outgoing attestation process. It sets default certificates,
keys, etc.
* The "certificate" object was renamed to "tn" and had it's key
change to telephone number since outgoing call attestation
needs to look up certificates by telephone number.
* The "profile" object had more parameters added to it that can
override default parameters specified in the "attestation"
and "verification" objects.
* The "store" object was removed altogther as it was never
implemented.
* We now use libjwt to create outgoing Identity headers and to
parse and validate signatures on incoming Identiy headers. Our
previous custom implementation was much of the source of the
interoperability issues.
* General code cleanup and refactor.
* Moved things to better places.
* Separated some of the complex functions to smaller ones.
* Using context objects rather than passing tons of parameters
in function calls.
* Removed some complexity and unneeded encapsuation from the
config objects.
Resolves: #351Resolves: #46
UserNote: Asterisk's stir-shaken feature has been refactored to
correct interoperability, RFC compliance, and performance issues.
See https://docs.asterisk.org/Deployment/STIR-SHAKEN for more
information.
UpgradeNote: The stir-shaken refactor is a breaking change but since
it's not working now we don't think it matters. The
stir_shaken.conf file has changed significantly which means that
existing ones WILL need to be changed. The stir_shaken.conf.sample
file in configs/samples/ has quite a bit more information. This is
also an ABI breaking change since some of the existing objects
needed to be changed or removed, and new ones added. Additionally,
if res_stir_shaken is enabled in menuselect, you'll need to either
have the development package for libjwt v1.15.3 installed or use
the --with-libjwt-bundled option with ./configure.
(cherry picked from commit 2e0d837e01)
This fixes a number of broken links throughout the
tree, mostly caused by wiki.asterisk.org being replaced
with docs.asterisk.org, which should eliminate the
need for sporadic fixes as in f28047db36.
Resolves: #430
(cherry picked from commit 3bb34477d4)
This improves the documentation for the bandwidth setting
in iax.conf by making it clearer what the ramifications
of this setting are. It also changes the sample default
from low to high, since only high is compatible with good
codecs that people will want to use in the vast majority
of cases, and this is a common gotcha that trips up new users.
Resolves: #425
(cherry picked from commit 582c4645f3)
Internally, chan_dahdi only applies callgroup and
pickupgroup to FXO signalled channels, but this is
not documented anywhere. This is now documented in
the sample config, and a warning is emitted if a
user tries configuring these settings for channel
types that do not support these settings, since they
will not have any effect.
Resolves: #294
(cherry picked from commit 5b89e40541)
To better co-exist with sounds files that may be managed by
packages, custom sound files may now be placed in
AST_DATA_DIR/sounds/custom instead of the standard
AST_DATA_DIR/sounds/<lang> directory. If the new
"sounds_search_custom_dir" option in asterisk.conf is set
to "true", asterisk will search the custom directory for sounds
files before searching the standard directory. For performance
reasons, the "sounds_search_custom_dir" defaults to "false".
Resolves: #315
UserNote: A new option "sounds_search_custom_dir" has been added to
asterisk.conf that allows asterisk to search
AST_DATA_DIR/sounds/custom for sounds files before searching the
standard AST_DATA_DIR/sounds/<lang> directory.
(cherry picked from commit 0e0f99db1d)
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
UserNote: Introduce a new queue configuration option called
'periodic-announce-startdelay' which will vary the normal (historic)
behavior of starting the periodic announcement cycle at
periodic-announce-frequency seconds after entering the queue to start
the periodic announcement cycle at period-announce-startdelay seconds
after joining the queue. The default behavior if this config option is
not set remains unchanged.
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
(cherry picked from commit 130c3ab792)
Add patch to split the log level for invalid packets received on the
signaling port. The warning regarding the packet will move to level 2
so that it can still be displayed, while the raw packet will be at level
4.
This adds support for Called Subscriber Held for FXS
lines, which allows users to go on hook when receiving
a call and resume the call later from another phone on
the same line, without disconnecting the call. This is
a convenience mechanism that most real PSTN telephone
switches support.
ASTERISK-30372 #close
Resolves: #240
UserNote: Called Subscriber Held is now supported for analog
FXS channels, using the calledsubscriberheld option. This allows
a station user to go on hook when receiving an incoming call
and resume from another phone on the same line by going on hook,
without disconnecting the call.
(cherry picked from commit cd0bfe193f)
Added a new boolean configuration flag -
`order_multi_row_results_by_initial_column` - to both res_pgsql.conf
and res_config_odbc.conf that allows the administrator to disable the
explicit `ORDER BY` that was previously being added to all generated
SQL statements that returned multiple rows.
Fixes: #179
(cherry picked from commit 1171beb7e4)
Currently, if an FXS channel is still off hook when
all calls on the line have hung up, the user is provided
reorder tone until going back on hook again.
In addition to not reflecting what most commercial switches
actually do, it's very common for switches to automatically
reoriginate for the user so that dial tone is provided without
the user having to depress and release the hookswitch manually.
This can increase convenience for users.
This behavior is now supported for kewlstart FXS channels.
It's supported only for kewlstart (FXOKS) mainly because the
behavior doesn't make any sense for ground start channels,
and loop start signalling doesn't provide the necessary DAHDI
event that makes this easy to implement. Likely almost everyone
is using FXOKS over FXOLS anyways since FXOLS is pretty useless
these days.
ASTERISK-30357 #close
Resolves: #224
UserNote: The autoreoriginate setting now allows for kewlstart FXS
channels to automatically reoriginate and provide dial tone to the
user again after all calls on the line have cleared. This saves users
from having to manually hang up and pick up the receiver again before
making another call.
sig_analog allows users to flash and use the three-way dial
tone as a primitive hold function, simply by never timing
it out.
Some systems allow this dial tone to time out to silence,
so the user is not annoyed by a persistent dial tone.
This option allows the dial tone to time out normally to
silence.
ASTERISK-30004 #close
Resolves: #205
UserNote: The threewaysilenthold option now allows the three-way
dial tone to time out to silence, rather than continuing forever.
c3ff4648 removed the [iaxtel700] context but neglected to remove
references to it.
This commit addresses that and also removes iaxtel and freeworlddialup
references from other config files.
This deprecates the users.conf config file, which
is no longer as widely supported but still integrated
with a number of different modules.
Because there is no real mechanism for marking a
configuration file as "deprecated", and users.conf
is not just used in a single place, this now emits
a warning to the user when the PBX loads to notify
about the deprecation.
This configuration mechanism has been widely criticized
and discouraged since its inception, and is no longer
relevant to the configuration that most users are doing
today. Removing it will allow for some simplification
and cleanup in the codebase.
Resolves: #183
UpgradeNote: The users.conf config is now deprecated
and will be removed in a future version of Asterisk.
When immediate=yes on an FXS channel, sig_analog will
start fake audible ringback that continues until the
channel is answered. Even if it answers immediately,
the ringback is still audible for a brief moment.
This can be disruptive and unwanted behavior.
This adds an option to disable this behavior, though
the default behavior remains unchanged.
ASTERISK-30003 #close
Resolves: #118
UserNote: The immediatering option can now be set to no to suppress
the fake audible ringback provided when immediate=yes on FXS channels.
This adds an option 'force_longest_waiting_caller' which changes the
global behavior of the queue engine to prevent queue callers from
'jumping ahead' when an agent is in multiple queues.
Resolves: #108
Also closes old asterisk issues:
- ASTERISK-17732
- ASTERISK-17570
Change-Id: I0f84e27903fefbe2018d0afa2d67b23aa0b321ce
Adds the loop_last option to res_musiconhold,
which allows the last audio file in the directory
to be looped perpetually once reached, rather than
circling back to the beginning again.
Resolves: #122
ASTERISK-30462
UserNote: The loop_last option in musiconhold.conf now
allows the last file in the directory to be looped once reached.
A previous change, ASTERISK_29991, made it possible
to send additional Caller ID parameters that were
not previously supported.
This change adds support for analog DAHDI channels
to now be able to receive these parameters for
on-hook Caller ID, in order to enhance the usability
of CPE that support these parameters.
Resolves: #94
ASTERISK-30331
UserNote: Additional Caller ID properties are now supported on
incoming calls to FXS stations, namely the
redirecting reason and call qualifier.
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
Currently, both pulse and tone dialing are always enabled
on all FXS lines, with no way of disabling one or the other.
In some circumstances, it is desirable or necessary to
disable one of these, and this behavior can be problematic.
A new "dialmode" option is added which allows setting the
methods to support on a per channel basis for FXS (FXO
signalled lines). The four options are "both", "pulse",
"dtmf"/"tone", and "none".
Additionally, integration with the CHANNEL function is
added so that this setting can be updated for a channel
during a call.
Resolves: #35
ASTERISK-29992
UserNote: A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
Adds PJSIP as a supported technology to DUNDi.
To facilitate this, we now allow an endpoint to be specified
for outgoing PJSIP calls. We also allow users to force a specific
channel technology for outgoing SIP-protocol calls.
ASTERISK-28109 #close
ASTERISK-28233 #close
Change-Id: I2e28e5a5d007bd49e3df113ad567b011103899bf
A comment at the top of voicemail.conf says that #include
cannot be used in voicemail.conf because this breaks
the ability for app_voicemail to auto-update passwords.
This is factually incorrect, since Asterisk has no problem
updating files that are #include'd in the main configuration
file, and this does work in voicemail.conf as well.
ASTERISK-30479 #close
Change-Id: I3bf7d275849ab83f55f7fb6702a75a3077ee1df3
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
ASTERISK-30437 #close
Change-Id: Ia79984b6377ef78f167ad9ea2ac084bec29955d0
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
ASTERISK_30302 previously removed app_osplookup,
but its sample config was not removed.
This removes it since nothing else uses it.
ASTERISK-30438 #close
Change-Id: Ife234208f5f197644475db4ab1af95a8551642fd
Make the existing CURL parameters configurable and allow
to specify the usable protocols, proxy and DNS timeout.
ASTERISK-30340
Change-Id: I2eb02ef44190e026716720419bcbdbcc8125777b
Several queue fields were not being set to their default value during
a reload.
Additionally added some sample configuration options that were missing
from queues.conf.sample.
Change-Id: I3a88c7877af91752b1b46a0c087384f7eb9c47e4
Adds the overlap_context option, which can be used
to explicitly specify a context to use for overlap
dialing extension matches, rather than forcibly
using the context configured for the endpoint.
ASTERISK-30262 #close
Change-Id: Ibbcd4a8b11402428a187fb56b8d4e7408774a0db
For most modules that interacted with app_macro, this change is limited
to no longer looking for the current context from the macrocontext when
set. Additionally, the following modules are impacted:
app_dial - no longer supports M^ connected/redirecting macro
app_minivm - samples written using macro will no longer work.
The sample needs a re-write
app_queue - can no longer a macro on the called party's channel.
Use gosub which is currently supported
ccss - no callback macro, gosub only
app_voicemail - no macro support
channel - remove macrocontext and priority, no connected line or
redirection macro options
options - stdexten is deprecated to gosub as the default and only
pbx - removed macrolock
pbx_dundi - no longer look for macro
snmp - removed macro context, exten, and priority
ASTERISK-30304
Change-Id: I830daab293117179b8d61bd4df0d971a1b3d07f6
chan_sip supported sending AOC-D and AOC-E information in SIP INFO
messages in an "AOC" header in a format that was originally defined by
Snom. In the meantime, ETSI TS 124 647 introduced an XML-based AOC
format that is supported by devices from multiple vendors, including
Snom phones with firmware >= 8.4.2 (released in 2010).
This commit adds a new res_pjsip_aoc module that inserts AOC information
into outgoing messages or sends SIP INFO messages as described below.
It also fixes a small issue in res_pjsip_session which didn't always
call session supplements on outgoing_response.
* AOC-S in the 180/183/200 responses to an INVITE request
* AOC-S in SIP INFO (if a 200 response has already been sent or if the
INVITE was sent by Asterisk)
* AOC-D in SIP INFO
* AOC-D in the 200 response to a BYE request (if the client hangs up)
* AOC-D in a BYE request (if Asterisk hangs up)
* AOC-E in the 200 response to a BYE request (if the client hangs up)
* AOC-E in a BYE request (if Asterisk hangs up)
The specification defines one more, AOC-S in an INVITE request, which
is not implemented here because it is not currently possible in
Asterisk to have AOC data ready at this point in call setup. Once
specifying AOC-S via the dialplan or passing it through from another
SIP channel's INVITE is possible, that might be added.
The SIP INFO requests are sent out immediately when the AOC indication
is received. The others are inserted into an appropriate outgoing
message whenever that is ready to be sent. In the latter case, the XML
is stored in a channel variable at the time the AOC indication is
received. Depending on where the AOC indications are coming from (e.g.
PRI or AMI), it may not always be possible to guarantee that the AOC-E
is available in time for the BYE.
Successfully tested AOC-D and both variants of AOC-E with a Snom D735
running firmware 10.1.127.10. It does not appear to properly support
AOC-S however, so that could only be tested by inspecting SIP traces.
ASTERISK-21502 #close
Reported-by: Matt Jordan <mjordan@digium.com>
Change-Id: Iebb7ad0d5f88526bc6629d3a1f9f11665434d333
Adds support for the capture agent name field
of the Homer protocol to Asterisk by allowing
users to specify a name that will be sent to
the HEP server.
ASTERISK-30322 #close
Change-Id: I6136583017f9dd08daeb8be02f60fb8df4639a2b
msg_create_from_file currently does not dispatch emails,
which means that applications using this function, such
as MixMonitor, will not trigger notifications to users
(only AMI events are sent our currently). This is inconsistent
with other ways users can receive voicemail.
This is fixed by adding an option that attempts to send
an email and falling back to just the notifications as
done now if that fails. The existing behavior remains
the default.
ASTERISK-30283 #close
Change-Id: I597cbb9cf971a18d8776172b26ab187dc096a5c7
Add live_dangerously flag to manager and use this flag to
determine if a configuation file outside of AST_CONFIG_DIR
should be read.
ASTERISK-30176
Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404
(cherry picked from commit 81f10e847e)
Currently, chan_dahdi will wait for at least one
ring before an incoming call can enter the dialplan.
This is generally necessary in order to receive
the Caller ID spill and/or distinctive ringing
detection.
However, if neither of these is required, then there
is nothing gained by waiting for one ring and this
unnecessarily delays call setup. Users can now
use immediate=yes to make FXO channels (FXS signaled)
begin processing dialplan as soon as Asterisk receives
the call.
ASTERISK-30305 #close
Change-Id: I20818b370b2e4892c7f40c8a8753fa06a81750b5
Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
Allows bridging, parking, and dial messages to be globally
ignored for all CDRs such that only a single CDR record
is generated per channel.
This is useful when CDRs should endure for the lifetime of
an entire channel and bridging and dial updates in the
dialplan should not result in multiple CDR records being
created for the call. With the ignore bridging option,
bridging changes have no impact on the channel's CDRs.
With the ignore dial state option, multiple Dials and their
outcomes have no impact on the channel's CDRs. The
last disposition on the channel is preserved in the CDR,
so the actual disposition of the call remains available.
These two options can reduce the amount of "CDR hacks" that
have hitherto been necessary to ensure that CDR was not
"spoiled" by these messages if that was undesired, such as
putting a dummy optimization-disabled local channel between
the caller and the actual call and putting the CDR on the channel
in the middle to ensure that CDR would persist for the entire
call and properly record start, answer, and end times.
Enabling these options is desirable when calls correspond
to the entire lifetime of channels and the CDR should
reflect that.
Current default behavior remains unchanged.
ASTERISK-30091 #close
Change-Id: I393981af42732ec5ac3ff9266444abb453b7c832
Also added a note to the geolocation.conf.sample file
and added a README to the res/res_geolocation/wiki
directory.
Change-Id: I89c3c5db8c0701b33127993622d5e4f904bddfbc
