Commit 008731b0a4
caused a regression by resulting in logger.xml
being compiled and linked into the asterisk
binary in lieu of logger.c on certain platforms
if Asterisk was compiled in dev mode.
To fix this, we ensure the file has a unique
name without the extension. Most existing .xml
files have been named differently from any
.c files in the same directory or did not
pose this issue.
channels/pjsip/dialplan_functions.xml does not
pose this issue but is also being renamed
to adhere to this policy.
Resolves: #539
This reverts commit 315eb551db.
Over the past year, we've had several reports of "topology storms"
occurring where 2 external facing channels connected by one or more
local channels and bridges will get themselves in a state where
they continually send each other topology change requests. This
usually manifests itself in no-audio calls and a flood of
"Exceptionally long queue length" messages. It appears that this
commit is the cause so we're reverting it for now until we can
determine a more appropriate solution.
Resolves: #530
(cherry picked from commit 4715c1b11c)
Instead of using the same error message for
missing dependencies and conflicts, be specific
about what actually went wrong.
Resolves: #520
(cherry picked from commit f22f49e77a)
The ast_sip_request_transport_details must be zero initialized,
otherwise this could lead to a SEGV.
Resolves: #509
(cherry picked from commit 3e069f3274)
This fixes faulty branching logic for the
EndIf application. Instead of computing
the next priority, which should be done
for false conditionals or ExitIf, we should
simply advance to the next priority.
Resolves: #341
(cherry picked from commit 83a0cb51e5)
Commit 424be34563 introduced
a regression by calling ast_free on memory allocated by
realpath. This causes Asterisk to abort when executing this
function. Since the memory is allocated by glibc, it should
be freed using ast_std_free.
Resolves: #513
(cherry picked from commit b9ed57092f)
This increases the format width of option descriptions
to avoid needless truncation for longer descriptions.
Resolves: #428
(cherry picked from commit fcf36a8766)
Improve the "manager show connected" CLI command
to clarify that the last two columns are permissions
related, not counts, and use sufficient widths
to consistently display these values.
ASTERISK-30143 #close
Resolves: #482
(cherry picked from commit bc53a2a087)
Although `make_xml_documentation`'s `print_dependencies` command was
corrected by the previous fix (#461) for #142, the `create_xml` was
not properly handling `LOCAL_MOD_SUBDIRS` XML documentation.
(cherry picked from commit 91c733bc69)
This fixes a number of broken links throughout the
tree, mostly caused by wiki.asterisk.org being replaced
with docs.asterisk.org, which should eliminate the
need for sporadic fixes as in f28047db36.
Resolves: #430
(cherry picked from commit 8f5581b0d0)
Resolves: #462
UserNote: The option "j" is now available for the Dial application which
uses the initial stream topology of the caller to create the outgoing
channels.
(cherry picked from commit dcf58ee88f)
Instead of searching for the asterisk binary and the modules in the
filesystem, we now get their locations, along with libdir, from
the coredump itself...
For the binary, we can use `gdb -c <coredump> ... "info proc exe"`.
gdb can print this even without having the executable and symbols.
Once we have the binary, we can get the location of the modules with
`gdb ... "print ast_config_AST_MODULE_DIR`
If there was no result then either it's not an asterisk coredump
or there were no symbols loaded. Either way, it's not usable.
For libdir, we now run "strings" on the note0 section of the
coredump (which has the shared library -> memory address xref) and
search for "libasteriskssl|libasteriskpj", then take the dirname.
Since we're now getting everything from the coredump, it has to be
correct as long as we're not crossing namespace boundaries like
running asterisk in a docker container but trying to run
ast_coredumper from the host using a shared file system (which you
shouldn't be doing).
There is still a case for using --asterisk-bin and/or --libdir: If
you've updated asterisk since the coredump was taken, the binary,
libraries and modules won't match the coredump which will render it
useless. If you can restore or rebuild the original files that
match the coredump and place them in a temporary directory, you can
use --asterisk-bin, --libdir, and a new --moddir option to point to
them and they'll be correctly captured in a tarball created
with --tarball-coredumps. If you also use --tarball-config, you can
use a new --etcdir option to point to what normally would be the
/etc/asterisk directory.
Also addressed many "shellcheck" findings.
Resolves: #445
(cherry picked from commit 44f1522907)
The `get_documentation` awk script will only extract the first
DOCUMENTATION block that it finds in a given file. This is by design
(9bc2127) to prevent AMI event documentation from being pulled in to
the core.xml documentation file.
Because of this, the `LOG_GROUP` documentation added in 89709e2 was
not being properly extracted and was missing fom the resulting XML
documentation file. This commit moves the `LOG_GROUP` documentation to
a separate `logger.xml` file.
(cherry picked from commit 0b6e3bc59b)
There are valid scenarios where res_odbc's connection pool might have some dead
or stuck connections while others are healthy (imagine network
elements/firewalls/routers silently timing out connections to a single DB and a
single IP address, or a heterogeneous connection pool connected to potentially
multiple IPs/instances of a replicated DB using a DNS front end for load
balancing and one replica fails).
In order to time out those unhealthy connections without blocking access to
other parts of Asterisk that may attempt access to the connection pool, it would
be beneficial to not lock/block access around the entire pool in
_ast_odbc_request_obj2 while doing potentially blocking operations on connection
pool objects such as the connection_dead() test, odbc_obj_connect(), or by
dereferencing a struct odbc_obj for the last time and triggering a
odbc_obj_disconnect().
This would facilitate much quicker and concurrent timeout of dead connections
via the connection_dead() test, which could block potentially for a long period
of time depending on odbc.ini or other odbc connector specific timeout settings.
This also would make rapid failover (in the clustered DB scenario) much quicker.
This patch changes the locking in _ast_odbc_request_obj2() to not lock around
odbc_obj_connect(), _disconnect(), and connection_dead(), while continuing to
lock around truly shared, non-immutable state like the connection_cnt member and
the connections list on struct odbc_class.
Fixes: #465
(cherry picked from commit bfac3945f6)
If the script referenced by `#exec` does not exist, writes anything to
stderr, or exits abnormally or with a non-zero exit status, we log
that to Asterisk's error logging channel.
Additionally, write out a warning if the script produces no output.
Fixes#259
(cherry picked from commit 4327ec2907)
If LOCAL_MOD_SUBDIRS contains absolute paths, do not prefix them with
the path to Asterisk's source tree.
Fixes#142
(cherry picked from commit 2293edffd0)
Resequencing is a process that occurs when we open a voicemail folder
and discover that there are gaps between messages (e.g. `msg0000.txt`
is missing but `msg0001.txt` exists). Resequencing involves shifting
the existing messages down so we end up with a sequential list of
messages.
Currently, this process stops after reaching a threshold based on the
message limit (`maxmsg`) configured on the current folder. However, if
`maxmsg` is lowered when a voicemail folder contains more than
`maxmsg + 10` messages, resequencing will not run completely leaving
the mailbox in an inconsistent state.
We now resequence up to the maximum number of messages permitted by
`app_voicemail` (currently hard-coded at 9999 messages).
Fixes#86
(cherry picked from commit 6556a92393)
When mwimonitor=yes is enabled for an FXO port,
the do_monitor thread will launch mwi_thread if it thinks
there could be MWI on an FXO channel, due to the noise
threshold being satisfied. This, in turns, calls
analog_ss_thread_start in sig_analog. However, unlike
all other instances where __analog_ss_thread is called
in sig_analog, this call path does not properly set
pvt->ss_astchan to the Asterisk channel, which means
that the Asterisk channel is NULL when __analog_ss_thread
starts executing. As a result, the thread exits and the
channel is never properly cleaned up by calling ast_hangup.
This caused issues with do_monitor on incoming calls,
as it would think the channel was still owned even while
receiving events, leading to an infinite barrage of
warning messages; additionally, the channel would persist
improperly.
To fix this, the assignment is added to the call path
where it is missing (which is only used for mwi_thread).
A warning message is also added since previously there
was no indication that __analog_ss_thread was exiting
abnormally. This resolves both the channel leak and the
condition that led to the warning messages.
Resolves: #458
(cherry picked from commit 22e34193ee)
In 5ac5c2b0 we defined `OPENSSL_SUPPRESS_DEPRECATED` to silence
deprecation warnings. This commit switches over to using
non-deprecated API.
(cherry picked from commit 3859b630a7)
Certain channel options are not set anywhere or
exposed in any way to users, making them unusable.
This exposes some of these options which make sense
for users to manipulate at runtime.
Resolves: #442
(cherry picked from commit c222343ec6)
Any function or application that accepts a `&`-separated list of
filenames can now include a literal `&` in a filename by wrapping the
entire filename in single quotes, e.g.:
```
exten = _X.,n,Playback('https://example.com/sound.cgi?a=b&c=d'&hello-world)
```
Fixes#172
UpgradeNote: Ampersands in URLs passed to the `Playback()`,
`Background()`, `SpeechBackground()`, `Read()`, `Authenticate()`, or
`Queue()` applications as filename arguments can now be escaped by
single quoting the filename. Additionally, this is also possible when
using the `CONFBRIDGE` dialplan function, or configuring various
features in `confbridge.conf` and `queues.conf`.
(cherry picked from commit f8212d4594)
I assume this was missed when initially converting to XML
documentation and we've been kicking the can down the road since.
(cherry picked from commit 9e1a60727e)
Additionally add a `assert()` to in the TLS client setup code to
ensure that hostname is set when it is supposed to be.
Fixes#433
(cherry picked from commit f2961f048d)
`astcachedir` (added in b0842713) was not added to `live_ast` so
continued to point to the system `/var/cache` directory instead of the
one in the live environment.
(cherry picked from commit 978d09fc35)
Fixes a crash due to a lack of proper reference on the nativeformats
object before passing it into ast_request(). Also found potentially
similar use case bugs in app_chanisavail.c, bridge.c, and bridge_basic.c
Fixes: #388
(cherry picked from commit 275f7911b5)
This improves the documentation for the bandwidth setting
in iax.conf by making it clearer what the ramifications
of this setting are. It also changes the sample default
from low to high, since only high is compatible with good
codecs that people will want to use in the vast majority
of cases, and this is a common gotcha that trips up new users.
Resolves: #425
(cherry picked from commit 1f19227eab)
This adds the ability to filter console
logging by channel or groups of channels.
This can be useful on busy systems where
an administrator would like to analyze certain
calls in detail. A dialplan function is also
included for the purpose of assigning a channel
to a group (e.g. by tenant, or some other metric).
ASTERISK-30483 #close
Resolves: #242
UserNote: The console log can now be filtered by
channels or groups of channels, using the
logger filter CLI commands.
(cherry picked from commit a0fc8d1b5f)
Fedora 37 started shipping ilbc 3.0.4 which we don't yet support.
configure.ac now checks the system for "libilbc < 3" instead of
just "libilbc". If true, the system version of ilbc will be used.
If not, the version included at codecs/ilbc will be used.
Resolves: #84
(cherry picked from commit d819a6bccb)
See UserNote below.
Exposed the existing Hangup AMI action in manager.c so we can use
all of it's channel search and AMI protocol handling without
duplicating that code in dialplan_functions.c.
Added a lookup function to res_pjsip.c that takes in the
string represenation of the pjsip_status_code enum and returns
the actual status code. I.E. ast_sip_str2rc("DECLINE") returns
603. This allows the caller to specify PJSIPHangup(decline) in
the dialplan, just like Hangup(call_rejected).
Also extracted the XML documentation to its own file since it was
almost as large as the code itself.
UserNote: A new dialplan app PJSIPHangup and AMI action allows you
to hang up an unanswered incoming PJSIP call with a specific SIP
response code in the 400 -> 699 range.
(cherry picked from commit cd77953172)
When IAX2 debugging was enabled (`iax2 set debug on`), if the last IE
in a frame was one that may not have any data - such as the CALLTOKEN
IE in an NEW request - it was not getting displayed.
(cherry picked from commit 0e126b3841)
If attempting to ring a channel using a nonexistent cadence,
emit a warning, before falling back to the default cadence.
Resolves: #409
(cherry picked from commit 4b9a4483fc)
This adds optional ADSI support to the Directory
application, which allows callers with ADSI CPE
to navigate the Directory system significantly
faster than is possible using the audio prompts.
Callers can see the directory name (and optionally
extension) on their screenphone and confirm or
reject a match immediately rather than waiting
for it to be spelled out, enhancing usability.
Resolves: #356
(cherry picked from commit 5046620fa3)
Currently, trying to call a Local channel with a slash
in the extension will fail due to the parsing of characters
after such a slash as being dial modifiers. Additionally,
core_local is inconsistent and incomplete with
its parsing of Local dial strings in that sometimes it
uses the first slash and at other times it uses the last.
For instance, something like DAHDI/5 or PJSIP/device
is a perfectly usable extension in the dialplan, but Local
channels in particular prevent these from being called.
This creates inconsistent behavior for users, since using
a slash in an extension is perfectly acceptable, and using
a Goto to accomplish this works fine, but if specified
through a Local channel, the parsing prevents this.
This fixes this by explicitly parsing options from the
last slash in the extension, rather than the first one,
which doesn't cause an issue for extensions with slashes.
ASTERISK-30013 #close
Resolves: #248
(cherry picked from commit 2191a0d33f)
