marked "urgent" are considered to be higher priority than other messages
and so they will be played before any other messages in a user's mailbox.
There are two ways to leave an urgent message.
1. send the 'U' option to VoiceMail().
2. Set review=yes in voicemail.conf. This will give instructions for
a caller to mark a message as urgent after the message has been recorded.
I have tested that this works correctly with file and ODBC storage, and James
Rothenberger (who wrote initial support for this feature) has tested its use
with IMAP storage.
(closes issue #11817)
Reported by: jaroth
Based on branch http://svn.digium.com/svn/asterisk/team/jrothenberger/asterisk-urgent
Tested by: putnopvut, jaroth
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115588 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
................
r115565 | russell | 2008-05-08 14:15:25 -0500 (Thu, 08 May 2008) | 33 lines
Merged revisions 115564 via svnmerge from
https://origsvn.digium.com/svn/asterisk/branches/1.2
........
r115564 | russell | 2008-05-08 14:14:04 -0500 (Thu, 08 May 2008) | 25 lines
Fix a race condition that bbryant just found while doing some IAX2 testing.
He was running Asterisk trunk running IAX2 calls through a few Asterisk boxes,
however, the audio was extremely choppy. We looked at a packet trace and saw
a storm of INVAL and VNAK frames being sent from one box to another.
It turned out that what had happened was that one box tried to send a CONTROL
frame before the 3 way handshake had completed. So, that frame did not include
the destination call number, because it didn't have it yet. Part of our recent
work for security issues included an additional check to ensure that frames that
are supposed to include the destination call number have the correct one. This
caused the frame to be rejected with an INVAL. The frame would get retransmitted
for forever, rejected every time ...
This race condition exists in all versions that got the security changes,
in theory. However, it is really only likely that this would cause a problem in
Asterisk trunk. There was a control frame being sent (SRCUPDATE) at the _very_
beginning of the call, which does not exist in 1.2 or 1.4. However, I am fixing
all versions that could potentially be affected by the introduced race condition.
These changes are what bbryant and I came up with to fix the issue. Instead of
simply dropping control frames that get sent before the handshake is complete,
the code attempts to wait a little while, since in most cases, the handshake
will complete very quickly. If it doesn't complete after yielding for a little
while, then the frame gets dropped.
........
................
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115566 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r115304 | russell | 2008-05-05 14:49:25 -0500 (Mon, 05 May 2008) | 5 lines
Avoid putting opaque="" in Digest authentication. This patch came from switchvox.
It fixes authentication with Primus in Canada, and has been in use for a very long
time without causing problems with any other providers.
(closes issue AST-36)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@115305 65c4cc65-6c06-0410-ace0-fbb531ad65f3
dringXrange is a new feature that was added, and it attempted to default, but only when the option was specified.
(closes issue #12536)
Reported by: bjm
Patches:
12536-dringXrange.diff uploaded by qwell (license 4)
Tested by: bjm
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114922 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114891 | russell | 2008-04-30 11:30:01 -0500 (Wed, 30 Apr 2008) | 28 lines
Merge changes from team/russell/iax2_find_callno and iax2_find_callno_1.4
These changes address a critical performance issue introduced in the latest
release. The fix for the latest security issue included a change that made
Asterisk randomly choose call numbers to make them more difficult to guess by
attackers. However, due to some inefficient (this is by far, an understatement)
code, when Asterisk chose high call numbers, chan_iax2 became unusable after
just a small number of calls. On a small embedded platform, it would not be
able to handle a single call. On my Intel Core 2 Duo @ 2.33 GHz, I couldn't
run more than about 16 IAX2 channels. Ouch.
These changes address some performance issues of the find_callno() function
that have bothered me for a very long time. On every incoming media frame,
it iterated through every possible call number trying to find a matching
active call. This involved a mutex lock and unlock for each call number
checked. So, if the random call number chosen was 20000, then every media
frame would cause 20000 locks and unlocks. Previously, this problem was
not as obvious since Asterisk always chose the lowest call number it could.
A second container for IAX2 pvt structs has been added. It is an astobj2
hash table. When we know the remote side's call number, the pvt goes into
the hash table with a hash value of the remote side's call number. Then,
lookups for incoming media frames are a very fast hash lookup instead of an
absolutely insane array traversal.
In a quick test, I was able to get more than 3600% more IAX2 channels
on my machine with these changes.
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114892 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114880 | kpfleming | 2008-04-30 09:46:57 -0500 (Wed, 30 Apr 2008) | 2 lines
use the ARRAY_LEN macro for indexing through the iaxs/iaxsl arrays so that the size of the arrays can be adjusted in one place, and change the size of the arrays from 32768 calls to 2048 calls when LOW_MEMORY is defined
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114884 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114632 | mmichelson | 2008-04-24 16:35:08 -0500 (Thu, 24 Apr 2008) | 11 lines
Re-invite RTP during a masquerade so that, for instance, an AMI
redirect of two channels which are natively bridged will preserve audio
on both channels. This prevents a problem with Asterisk not re-inviting
due to one of the channels having being a zombie.
(closes issue #12513)
Reported by: mneuhauser
Patches:
asterisk-1.4-114602_restore-RTP-on-fixup.patch uploaded by mneuhauser (license 425)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114633 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
(closes issue #12496)
Reported by: daniele
Patches:
misdn-moh-1.6.0-beta7.1.patch uploaded by daniele (license 471)
Tested by: daniele
Technically, I didn't use the patch above except to find out what revision to merge - but it's the same thing as this revision.
........
r51989 | crichter | 2007-01-24 06:57:22 -0600 (Wed, 24 Jan 2007) | 1 line
added fix from #8899
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114612 65c4cc65-6c06-0410-ace0-fbb531ad65f3
https://origsvn.digium.com/svn/asterisk/branches/1.4
........
r114537 | russell | 2008-04-22 13:03:33 -0500 (Tue, 22 Apr 2008) | 9 lines
If the dial string passed to the call channel callback does not indicate an
extension, then consider the extension on the channel before falling back
to the default.
(closes issue #12479)
Reported by: darren1713
Patches:
exten_dial_fix_chan_iax2.c.patch uploaded by darren1713 (license 116)
........
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114538 65c4cc65-6c06-0410-ace0-fbb531ad65f3
I gathered the code that filled the string, and put it in a different func which
I cryptically call "append_lock_information()".
Now, both log_show_lock(), and handle_show_locks() both call this code to do
the work. Tested, seems to work fine.
Also, log_show_lock was modified to use the ast_str stuff, along with checking
for successful ast_str creation, and freeing the ast_str obj when finished.
A break was inserted to terminate the search for the lock; we should never
see it twice.
An example usage in chan_sip.c was created as a comment, for instructional
purposes.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114520 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Reported by: oej
Tested by: jpeeler
This patch implements multiple parking lots for parked calls. The default parkinglot is used by default, however setting the channel variable PARKINGLOT in the dialplan will allow use of any other configured parkinglot. See configs/features.conf.sample for more details on setting up another non-default parkinglot. Also, one can (currently) set the default parkinglot to use in the driver configuration file via the parkinglot option.
Patch initially written by oej, brought up to date and finalized by mvanbaak, and then stabilized and converted to astobj2 by me.
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@114487 65c4cc65-6c06-0410-ace0-fbb531ad65f3
