We should also return all codecs on an re-INVITE without SDP for a
call that used late offer (e.g. no SDP in the initial INVITE, SDP
in the ACK). Bugfix for feature introduced in ASTERISK-30193
(https://issues.asterisk.org/jira/browse/ASTERISK-30193)
Migration from previous gerrit change that was not merged.
(cherry picked from commit 8711c84e3c)
The current AST_CEL_LOCAL_OPTIMIZE event is and has been
triggered on a local optimization end to serve as a flag
indicating the event occurred. This change adds a second
AST_CEL_LOCAL_OPTIMIZE_BEGIN event for further detail.
Resolves: #52
UpgradeNote: The existing AST_CEL_LOCAL_OPTIMIZE can continue
to be used as-is and the AST_CEL_LOCAL_OPTIMIZE_BEGIN event
can be ignored if desired.
UserNote: The new AST_CEL_LOCAL_OPTIMIZE_BEGIN can be used
by itself or in conert with the existing
AST_CEL_LOCAL_OPTIMIZE to book-end local channel optimizaion.
(cherry picked from commit fa18f2d71e)
* Remove .gitreview and switch to pulling the main asterisk branch
version from configure.ac instead.
* Replace references to JIRA with GitHub.
* Other minor cleanup found along the way.
Resolves: #39
(cherry picked from commit 6f218514fb)
When using mediasec, requests sent after a 401 must still contain the
Security-Client header according to
draft-dawes-sipcore-mediasec-parameter.
Resolves: #48
(cherry picked from commit ecd5f91125)
Currently, both pulse and tone dialing are always enabled
on all FXS lines, with no way of disabling one or the other.
In some circumstances, it is desirable or necessary to
disable one of these, and this behavior can be problematic.
A new "dialmode" option is added which allows setting the
methods to support on a per channel basis for FXS (FXO
signalled lines). The four options are "both", "pulse",
"dtmf"/"tone", and "none".
Additionally, integration with the CHANNEL function is
added so that this setting can be updated for a channel
during a call.
Resolves: #35
ASTERISK-29992
UserNote: A "dialmode" option has been added which allows
specifying, on a per-channel basis, what methods of
subscriber dialing (pulse and/or tone) are permitted.
Additionally, this can be changed on a channel
at any point during a call using the CHANNEL
function.
(cherry picked from commit 5d1dd11143)
Adds PJSIP as a supported technology to DUNDi.
To facilitate this, we now allow an endpoint to be specified
for outgoing PJSIP calls. We also allow users to force a specific
channel technology for outgoing SIP-protocol calls.
ASTERISK-28109 #close
ASTERISK-28233 #close
Change-Id: I2e28e5a5d007bd49e3df113ad567b011103899bf
(cherry picked from commit 4e602a1afe)
The current STIR/SHAKEN signing process is inconsistent with the
RFCs in a couple ways that can cause interoperability issues.
RFC8225 specifies that the keys must be ordered lexicographically, but
currently the fields are simply ordered according to the order
in which they were added to the JSON object, which is not
compliant with the RFC and can cause issues with some carriers.
To fix this, we now leverage libjansson's ability to dump a JSON
object sorted by key value, yielding the correct field ordering.
Additionally, telephone numbers must have any leading + prefix removed
and must not contain characters outside of 0-9, *, and # in order
to comply with the RFCs. Numbers are now properly formatted as such.
ASTERISK-30407 #close
Change-Id: Iab76d39447c4b8cf133de85657dba02fda07f9a2
(cherry picked from commit 1bbcb98558)
In a three party scenario with INVITE with replaces, we need to
unhold the call, otherwise one party continues to get music on
hold, and the call is not properly bridged between them.
ASTERISK-30428
Change-Id: I5675df11e739be5226b328f8828d4b8d81fbefb4
(cherry picked from commit 91c4d78914)
A comment at the top of voicemail.conf says that #include
cannot be used in voicemail.conf because this breaks
the ability for app_voicemail to auto-update passwords.
This is factually incorrect, since Asterisk has no problem
updating files that are #include'd in the main configuration
file, and this does work in voicemail.conf as well.
ASTERISK-30479 #close
Change-Id: I3bf7d275849ab83f55f7fb6702a75a3077ee1df3
(cherry picked from commit f5289a5483)
The F option in the xmldocs for the Queue application
was erroneously duplicated, causing it to display
twice on the wiki. The two sections are now merged into one.
Additionally, the description for the d option was quite
vague. Some more details are added to provide context
as to what this actually does.
ASTERISK-30486 #close
Change-Id: I6706cea708b5cc781f59f8652c2cb377e55aed7e
(cherry picked from commit 1ed147ffc1)
The unit test XML output was counting all registered tests as "run"
even when only a subset were actually requested to be run and
the "failures" attribute was missing.
* The "tests" attribute of the "testsuite" element in the
output XML now reflects only the tests actually requested
to be executed instead of all the tests registered.
* The "failures" attribute was added to the "testsuite"
element.
Also added 2 new unit tests that just pass and fail to be
used for CI testing.
Change-Id: Ia137814b5aeb0e1a44c75034bd3615c26021da69
(cherry picked from commit a346fa54a5)
Various changes to ensure that the lexers and parsers can be correctly
generated when REBUILD_PARSERS is enabled.
Some notes:
* Because of the version of flex we are using to generate the lexers
(2.5.35) some post-processing in the Makefile is still required.
* The generated lexers do not contain the problematic C99 check that
was being replaced by the call to sed in the respective Makefiles so
it was removed.
* Since these files are generated, they will include trailing
whitespace in some places. This does not need to be corrected.
Change-Id: Ibbd343606fcf5c0d285b1599e6e8e59f514f2e4e
(cherry picked from commit ee4278959a)
Add periodic beep option to one-touch recording by setting
the touch variable TOUCH_MONITOR_BEEP or
TOUCH_MIXMONITOR_BEEP to the desired interval in seconds.
If the interval is less than 5 seconds, a minimum of 5
seconds will be imposed. If the interval is set to an
invalid value, it will default to 15 seconds.
A new test event PERIODIC_HOOK_ENABLED was added to the
func_periodic_hook hook_on function to indicate when
a hook is started. This is so we can test that the touch
variable starts the hook as expected.
ASTERISK-30446
Change-Id: I800e494a789ba7a930bbdcd717e89d86040d6661
(cherry picked from commit 1ad52a1263)
While it is possible to create multiple mixmonitor instances
on a channel, it was not previously possible to mute individual
instances.
This change includes the ability to specify the MixMonitorID
when calling the manager action: MixMonitorMute. This will
allow an individual MixMonitor instance to be muted via id.
This id can be stored as a channel variable using the 'i'
MixMonitor option.
As part of this change, if no MixMonitorID is specified in
the manager action MixMonitorMute, Asterisk will set the mute
flag on all MixMonitor spy-type audiohooks on the channel.
This is done via the new audiohook function:
ast_audiohook_set_mute_all.
ASTERISK-30464
Change-Id: Ibba8c7e750577aa1595a24b23316ef445245be98
(cherry picked from commit b2e9419961)
This newly introduced periodic-announce-startdelay makes it possible to
configure the initial start delay of the first periodic announcement
after which periodic-announce-frequency takes over.
ASTERISK-30437 #close
Change-Id: Ia79984b6377ef78f167ad9ea2ac084bec29955d0
Signed-off-by: Jaco Kroon <jaco@uls.co.za>
(cherry picked from commit c405630810)
Fix issue with returning empty instead of dumping
the JSON string when recursing.
Also adds a unit test to capture this fix.
ASTERISK-30441 #close
Change-Id: If0bde9f3fe84f7af485e0838205cc21e0f752a85
(cherry picked from commit 595fe0f1cc)
DTMF frames are not handled in app_dial when sent towards the
caller. This means that if DTMF is sent to the calling party
and the call has not yet been answered, the DTMF is not audible.
This is now fixed by relaying DTMF frames if only a single
destination is being dialed.
ASTERISK-29516 #close
Change-Id: Iafd7430ac2915126d42dc48f0b73b262452ee027
(cherry picked from commit 48e3da5cdf)
* All of the code that used subversion has been removed.
* When Asterisk is checked out from a tag or commit instead
of one of the regular branches, git would emit messages like
"fatal: ref HEAD is not a symbolic ref" which weren't fatal
at all. Those are now suppressed.
Change-Id: I2a11bc9ebbaf6dfa50f53516ede50a6bac65ca3c
(cherry picked from commit f41183e101)
For 'core show channels', the Channel name field is increased
to 64 characters and the Location name field is increased to
32 characters.
For 'core show channels verbose', the Channel name field is
increased to 80 characters, the Context is increased to 24
characters and the Extension is increased to 24 characters.
ASTERISK-30455
Change-Id: Ibec3742ce360ffc93bc56e9984c2a21dabc4d5e1
(cherry picked from commit f102e81d0f)
Sending the "RECORD FILE" command without the optional
`offset_samples` argument can result in two beeps playing on the
channel.
This bug has been present since Asterisk 0.3.0 (2003-02-06).
ASTERISK-30457 #close
Change-Id: I95e88aa59378784d7f0eb648843f090e6723b787
(cherry picked from commit bcf0ffd278)
Adds an AMI action to send a flash event
on a channel.
ASTERISK-30440 #close
Change-Id: I4707aeecb3cd8f3e63fd0c3fe009798943c369c9
(cherry picked from commit 0c8b42ede3)
`rc.archlinux.asterisk`, which explicitly requests bash in its
shebang, uses the following command syntax:
${DAEMON} -rx "core stop now" > /dev/null 2&>1
The intent of which is to execute:
${DAEMON} -rx "core stop now"
While sending both stdout and stderr to `/dev/null`. Unfortunately,
because the `&` is in the wrong place, bash is interpreting the `2` as
just an additional argument to the `$DAEMON` command and not as a file
descriptor and proceeds to use the bashism `&>` to send stderr and
stdout to a file named `1`.
So we clean it up and just use bash's shortcut syntax.
Issue raised and a fix suggested (but not used) by peutch on GitHub¹.
ASTERISK-30449 #close
1. https://github.com/asterisk/asterisk/pull/31
Change-Id: Ie279bf4efb4d95cbf507313483d316e977303d19
(cherry picked from commit 5283d444d9)
Fix the following build failure with libressl by using SSL_is_server
which is available since version 2.7.0 and
d7ec516916:
iostream.c: In function 'ast_iostream_close':
iostream.c:559:41: error: invalid use of incomplete typedef 'SSL' {aka 'struct ssl_st'}
559 | if (!stream->ssl->server) {
| ^~
ASTERISK-30107 #close
Fixes: - http://autobuild.buildroot.org/results/ce4d62d00bb77ba5b303cacf6be7e350581a62f9
Change-Id: Iea7f34970297f2fb50285d73462d0174ba7e9587
(cherry picked from commit f34d9d5618)
Make the existing CURL parameters configurable and allow
to specify the usable protocols, proxy and DNS timeout.
ASTERISK-30340
Change-Id: I2eb02ef44190e026716720419bcbdbcc8125777b
(cherry picked from commit 2048877889)
There are two main parts of the change associated with this
commit. These are driven by the change in call order of
pubsub_on_rx_refresh and pubsub_on_evsub_state by pjproject
when an in-dialog SUBSCRIBE is received.
First, the previous behavior was for pjproject to call
pubsub_on_rx_refresh before calling pubsub_on_evsub_state
when an in-dialog SUBSCRIBE was received that changes the
subscription state.
If that change was a termination due to a re-SUBSCRIBE with
an expires of 0, we used to use the call to pubsub_on_rx_refresh
to set the substate of the evsub to TERMINATE_PENDING before
pjproject could call pubsub_on_evsub_state.
This substate let pubsub_on_evsub_state know that the
subscription TERMINATED event could be ignored as there was
still a subsequent NOTIFY that needed to be generated and
another call to pubsub_on_evsub_state to come with it.
That NOTIFY was sent via serialized_pubsub_on_refresh_timeout
which would see the TERMINATE_PENDING state and transition it
to TERMINATE_IN_PROGRESS before triggering another call to
pubsub_on_evsub_state (which now would clean up the evsub.)
The new pjproject behavior is to call pubsub_on_evsub_state
before pubsub_on_rx_refresh. This means we no longer can set
the state to TERMINATE_PENDING to tell pubsub_on_evsub_state
that it can ignore the first TERMINATED event.
To handle this, we now look directly at the event type,
method type and the expires value to determine whether we
want to ignore the event or use it to trigger the evsub
cleanup.
Second, pjproject now expects the NOTIFY to actually be sent
during pubsub_on_rx_refresh and avoids the protocol violation
inherent in sending a NOTIFY before the SUBSCRIBE is
acknowledged by caching the sent NOTIFY then sending it
after responding to the SUBSCRIBE.
This requires we send the NOTIFY using the non-serialized
pubsub_on_refresh_timeout directly and let pjproject handle
the protocol violation.
ASTERISK-30469
Change-Id: I05c1d91a44fe28244ae93faa4a2268a3332b5fd7
* Added a new function ast_utf8_replace_invalid_chars() to
utf8.c that copies a string replacing any invalid UTF-8
sequences with the Unicode specified U+FFFD replacement
character. For example: "abc\xffdef" becomes "abc\uFFFDdef".
Any UTF-8 compliant implementation will show that character
as a � character.
* Updated res_pjsip:set_id_from_hdr() to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
* Updated stasis_channels:ast_channel_publish_varset to use
ast_utf8_replace_invalid_chars and print a warning if any
invalid sequences were found during the copy.
ASTERISK-27830
Change-Id: I4ffbdb19c80bf0efc675d40078a3ca4f85c567d8
This avoids buffer overflow errors when running tests that capture
output from child processes.
This also corrects a copypasta in an off-nominal error message.
Change-Id: Ib482847a3515364f14c7e7a0c0a4213851ddb10d
`getcwd(…)` is decorated with the `warn_unused_result` attribute and
therefore needs its return value checked.
Change-Id: Idcccb20a0abf293202c28633d0e9ee0f6a9dbe93
