app_voicemail was using the stasis cache to build and maintain a
list of mailboxes that had subscribers. It then used this list
to determine if a mailbox should be polled for new messages if
polling was enabled. For this to work, stasis had to cache every
subscription and unsubscription to the mailbox which caused a lot of
overhead, both cpu and memory related.
Since polling is only required when changes are being made to
mailboxes outside of app_voicemail and since the number of mailboxes
that don't have any subscribers is likely to be very low, all
mailboxes are now polled instead of just the ones with subscribers.
This paves the way for disabling the caching of stasis subscription
change messages.
Also fixed cleanup in some of the unit tests that not only left
test users in the users list but also caused segfaults if the tests
were run more than once.
ASTERISK-27121
Change-Id: I5cceb737246949f9782955c64425b8bd25a9e9ee
Given a scenario where a session refresh was done with a removed
stream we would always add a removed stream to the outgoing SDP
even if one did not already exist.
This change makes it so that a removed stream is only placed into
the SDP if one already exists.
ASTERISK-28047
Change-Id: Ibb97d21cdeb87a8acae0c720861b0ff255708442
This is removed in favor of ./configure --with-jansson-bundled. The
install-unpackaged command would only install jansson once, so once
installed it would never update, where the bundled copy will be kept up
to date.
Change-Id: Ideab1f65419608d3795aa608e9da873823cc42d3
Both pjsip_tx_data.tp_info.dst_name and pjsip_rx_data.pkt_info.src_name
store IPv6 addresses without enclosing brackets. This causes some log
output to be confusing because it is difficult to separate the IPv6
address from a port specification.
* Use pj_sockaddr_print() along with pjsip_tx_data.tp_info.dst_addr and
pjsip_rx_data.pkt_info.src_addr where possible for consistent IPv6
output.
* When a pj_sockaddr is not available, explicitly wrap IPv6 addresses
in brackets.
* When assigning pjsip_rx_data.pkt_info.src_name ourselves, make sure
to also set pjsip_rx_data.pkt_info.src_addr.
Change-Id: I5cfe997ced7883862a12b9c7d8551d76ae02fcf8
Can't do anonymous http checkout from Security-testsuite.
Need to use same credentials as the gerrit review checkout.
Change-Id: I87af68c995cb8926f5e87f9af245600d76984f05
Since app_voicemail no longer uses the cache to maintain its state
there is no longer a need to cache these messages.
ASTERISK-27121
Change-Id: I321c708505f5ad8d00e1b0afc4c27dc2ac12ecb4
As they're not actively used, they only grow stale. The moduleinfo field itself
is kept in Asterisk 13/15 for ABI compatibility.
ASTERISK-28046 #close
Change-Id: I8df66a7007f807840414bb348511a8c14c05a9fc
The documentation already specified EVENT_FLAG_DIALPLAN for this
event, but the implementation was using EVENT_FLAG_CALL.
Using EVENT_FLAG_DIALPLAN allows AMI clients to opt out of receiving
this highly verbose event.
ASTERISK-28033
Change-Id: I45b3119f30e4dbc17b49831f2b1a4f2c1beadafe
The bundled version of pjproject has a patch for Solaris compatability
that changes the definition of various socket structures which we need
to account for when compiling against a non-bundled version.
ASTERISK-28049 #close
Change-Id: Ia1ea47c433fc2d915115193ee889a752373925f0
If Asterisk is built using a DESTDIR this will cause the bundled jansson
to be installed to an unexpected location and we will fail to find it.
Change-Id: Id033e2813261e0d45232383d44c6391122169548
On MOH activation, moh_files_readframe() is called while the current
stream attached to the channel is NULL and it calls ast_moh_files_next()
immediately. However, it won't call ast_moh_files_next() again if sample
reading fails. The failure may occur because res_musiconhold retains the
last sample reading position in the channel data and MOH during the
previous hold/retrieve just reached EOF. Obviously, a bit of bad luck is
required here.
* Restructured moh_files_readframe() to try a second time to start MOH if
there was no stream setup and the saved position was at EOF. Also added
comments describing what is going on for each step.
ASTERISK-28029
Change-Id: I1508cf2c094f8feca22d6f76deaa9fdfa9944860
Generators provide such functionality as tone generation or
silence generation. RTCP frames provide RTCP information and
should not stop generators from operating.
ASTERISK-28005
Change-Id: Ieadada07b068a7aa426e8763f1b73a18e1ac34a9
Currently, to convert from a pj_sockaddr to an ast_sockaddr, the address
needs to be rendered to a string and then parsed into the correct
structure. This also involves a call to getaddrinfo(3). The same is true
for the inverse operation.
Instead, because we know the internal structure of both ast_sockaddr and
pj_sockaddr, we can translate directly between the two without the
need for an intermediate string.
Change-Id: If0fc4bba9643f755604c6ffbb0d7cc46020bc761
The stasis cache provides a way to reconstruct the current state
of topic subscribers. Unfortunately, since every subscribe and
unsubscribe is cached, the cache continues to grow unabated while
asterisk is running. This patch removes subscribe messages from
the cache when the corresponding unsubscribe is received.
This patch also registers the cache containers with ao2 so that if
AO2_DEBUG is turned on, you can list the container and get its
stats from the CLI.
ASTERISK-27121
Change-Id: I3d18905e477f3721815da91f30da8d3fbb2d4f56
Added decline if extensions.conf file not available
when loading pbx_config, and also made sure everything
gets properly unregistered and/or destroyed on unload.
Change-Id: Ib00665106043b1be5148ffa7a477396038915854
Added a check when we receive a HTTP request line or header line that is
too long. We now return an error response to the sender because we are
not able to process the request.
Change-Id: I6df2705435fd7dde4d5d3bdf7acec859cfb7c12d
Providing a buffer larger than the internal buffer of ast_iostream_gets()
fails to get lines longer than the internal buffer.
* Made ast_iostream_gets() fill the supplied buffer with read data until
either a '\n' is found or the supplied buffer is filled just like fgets().
Change-Id: If18b3f6ee500e22f0633a68779ed09f7e0f305ed
The T.38 fax gateway state machine can cause the fax gateway
to be started more than once on a channel depending on the
responses of the remote endpoint. This would previously leak
the channel name, channel unique id, and underlying fax engine
state. This change instead makes it so that if the fax gateway
session is already present and not reserved the fax gateway
is not started again.
ASTERISK-27981
Change-Id: I552d95086860cb18f2522ee40ef47b13b6da2e0e
SIP responses over WebSockets when the client is using IPv6 have invalid
Via headers according to RFC 3261. The 'received' header parameter
should not be wrapped in brackets if it is an IPv6 address.
When src_name is populated by the built-in PJSIP transports, the code
uses pj_sockaddr_print() with 'flags' set to 0, meaning that the
brackets are not rendered around IPv6 addresses.
This may be related to ASTERISK~27101.
See also: https://github.com/onsip/SIP.js/pull/594
ASTERISK-28020 #close
Change-Id: I8ea9d289901b837512bee2ca2535e3dc14f04d77
This new option can be passed for ./configure or
./tests/CI/buildAsterisk.sh to prevent download/install of binary
modules.
Normally enabling the categories MENUSELECT_CODECS or MENUSELECT_RES
will result in binary modules being enabled even if the build target is
incompatible with those modules. This includes CI scripts which enable
categories before disabling specific modules.
If more binary modules are offered in the future this will help avoid
accidentally downloading them if unwanted or incompatible. Adding a
binary module will only require creating a new menuselect entry similar
to the existing ones, it will not be necessary to modify the CI scripts.
Change-Id: I6b1bd1c75a2e48f05b8b8a45b7a7a2d00a079166
The realtime text timer pops regularly and sends text frames even if
the buffer is empty. This causes a lot of unecessary debug logging.
* Made red_write() test if we need to send a frame before calling
ast_rtp_write()
ASTERISK-28002
Reported by: Emmanuel BUU
Tested by: Emmanuel BUU
Change-Id: Icf81310c3b8080b615a42060afc02ab41f9523dd
