Created the following AMI commands and corresponding events for res_pjsip:
PJSIPShowEndpoints - Provides a listing of all pjsip endpoints and a few
select attributes on each.
Events:
EndpointList - for each endpoint a few attributes.
EndpointlistComplete - after all endpoints have been listed.
PJSIPShowEndpoint - Provides a detail list of attributes for a specified
endpoint.
Events:
EndpointDetail - attributes on an endpoint.
AorDetail - raised for each AOR on an endpoint.
AuthDetail - raised for each associated inbound and outbound auth
TransportDetail - transport attributes.
IdentifyDetail - attributes for the identify object associated with
the endpoint.
EndpointDetailComplete - last event raised after all detail events.
PJSIPShowRegistrationsInbound - Provides a detail listing of all inbound
registrations.
Events:
InboundRegistrationDetail - inbound registration attributes for each
registration.
InboundRegistrationDetailComplete - raised after all detail records have
been listed.
PJSIPShowRegistrationsOutbound - Provides a detail listing of all outbound
registrations.
Events:
OutboundRegistrationDetail - outbound registration attributes for each
registration.
OutboundRegistrationDetailComplete - raised after all detail records
have been listed.
PJSIPShowSubscriptionsInbound - A detail listing of all inbound subscriptions
and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
PJSIPShowSubscriptionsOutbound - A detail listing of all outboundbound
subscriptions and their attributes.
Events:
SubscriptionDetail - on each subscription detailed attributes
SubscriptionDetailComplete - raised after all detail records have
been listed.
(issue ASTERISK-22609)
Reported by: Matt Jordan
Review: https://reviewboard.asterisk.org/r/2959/
........
Merged revisions 403131 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@403133 65c4cc65-6c06-0410-ace0-fbb531ad65f3
This patch fixes a reference counting memory leak on the ao2_container
created as part of create_mwi_subscriptions. When we create the container
in this routine, the intent is to hand lifetime ownership over to the global
container unsolicited_mwi. When ao2_global_obj_replace_unref is called, the
reference count on mwi_subscriptions (the container) will be bumped by 1;
however, the function does not decrement the reference count on
mwi_subscriptions when this occurs. This will prevent the container from being
fully disposed of when Asterisk exits (or on any subsequent call to this
operation, such as during a reload).
........
Merged revisions 402940 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@402942 65c4cc65-6c06-0410-ace0-fbb531ad65f3
........
r399887 | dlee | 2013-09-26 10:41:47 -0500 (Thu, 26 Sep 2013) | 1 line
Minor performance bump by not allocate manager variable struct if we don't need it
........
r400138 | dlee | 2013-09-30 10:24:00 -0500 (Mon, 30 Sep 2013) | 23 lines
Stasis performance improvements
This patch addresses several performance problems that were found in
the initial performance testing of Asterisk 12.
The Stasis dispatch object was allocated as an AO2 object, even though
it has a very confined lifecycle. This was replaced with a straight
ast_malloc().
The Stasis message router was spending an inordinate amount of time
searching hash tables. In this case, most of our routers had 6 or
fewer routes in them to begin with. This was replaced with an array
that's searched linearly for the route.
We more heavily rely on AO2 objects in Asterisk 12, and the memset()
in ao2_ref() actually became noticeable on the profile. This was
#ifdef'ed to only run when AO2_DEBUG was enabled.
After being misled by an erroneous comment in taskprocessor.c during
profiling, the wrong comment was removed.
Review: https://reviewboard.asterisk.org/r/2873/
........
r400178 | dlee | 2013-09-30 13:26:27 -0500 (Mon, 30 Sep 2013) | 24 lines
Taskprocessor optimization; switch Stasis to use taskprocessors
This patch optimizes taskprocessor to use a semaphore for signaling,
which the OS can do a better job at managing contention and waiting
that we can with a mutex and condition.
The taskprocessor execution was also slightly optimized to reduce the
number of locks taken.
The only observable difference in the taskprocessor implementation is
that when the final reference to the taskprocessor goes away, it will
execute all tasks to completion instead of discarding the unexecuted
tasks.
For systems where unnamed semaphores are not supported, a really
simple semaphore implementation is provided. (Which gives identical
performance as the original taskprocessor implementation).
The way we ended up implementing Stasis caused the threadpool to be a
burden instead of a boost to performance. This was switched to just
use taskprocessors directly for subscriptions.
Review: https://reviewboard.asterisk.org/r/2881/
........
r400180 | dlee | 2013-09-30 13:39:34 -0500 (Mon, 30 Sep 2013) | 28 lines
Optimize how Stasis forwards are dispatched
This patch optimizes how forwards are dispatched in Stasis.
Originally, forwards were dispatched as subscriptions that are invoked
on the publishing thread. This did not account for the vast number of
forwards we would end up having in the system, and the amount of work it
would take to walk though the forward subscriptions.
This patch modifies Stasis so that rather than walking the tree of
forwards on every dispatch, when forwards and subscriptions are changed,
the subscriber list for every topic in the tree is changed.
This has a couple of benefits. First, this reduces the workload of
dispatching messages. It also reduces contention when dispatching to
different topics that happen to forward to the same aggregation topic
(as happens with all of the channel, bridge and endpoint topics).
Since forwards are no longer subscriptions, the bulk of this patch is
simply changing stasis_subscription objects to stasis_forward objects
(which, admittedly, I should have done in the first place.)
Since this required me to yet again put in a growing array, I finally
abstracted that out into a set of ast_vector macros in
asterisk/vector.h.
Review: https://reviewboard.asterisk.org/r/2883/
........
r400181 | dlee | 2013-09-30 13:48:57 -0500 (Mon, 30 Sep 2013) | 28 lines
Remove dispatch object allocation from Stasis publishing
While looking for areas for performance improvement, I realized that an
unused feature in Stasis was negatively impacting performance.
When a message is sent to a subscriber, a dispatch object is allocated
for the dispatch, containing the topic the message was published to, the
subscriber the message is being sent to, and the message itself.
The topic is actually unused by any subscriber in Asterisk today. And
the subscriber is associated with the taskprocessor the message is being
dispatched to.
First, this patch removes the unused topic parameter from Stasis
subscription callbacks.
Second, this patch introduces the concept of taskprocessor local data,
data that may be set on a taskprocessor and provided along with the data
pointer when a task is pushed using the ast_taskprocessor_push_local()
call. This allows the task to have both data specific to that
taskprocessor, in addition to data specific to that invocation.
With those two changes, the dispatch object can be removed completely,
and the message is simply refcounted and sent directly to the
taskprocessor.
Review: https://reviewboard.asterisk.org/r/2884/
........
Merged revisions 399887,400138,400178,400180-400181 from http://svn.asterisk.org/svn/asterisk/branches/12
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@400186 65c4cc65-6c06-0410-ace0-fbb531ad65f3
Prior to this change, we would reject SUBSCRIBE requests that had no Accept
headers. Now event package handlers that handle the default type for the
event package indicate that they do so. Therefore, if we have a handler that
can handle the default type, we can allow SUBSCRIBEs for the handler's event
package that have no Accept headers.
(closes issue ASTERISK-22067)
reported by Mark Michelson
Review: https://reviewboard.asterisk.org/r/2774
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@397441 65c4cc65-6c06-0410-ace0-fbb531ad65f3
The general gist is to have a clear boundary between old SIP stuff
and new SIP stuff by having the word "SIP" for old stuff and "PJSIP"
for new stuff. Here's a brief rundown of the changes:
* The word "Gulp" in dialstrings, functions, and CLI commands is now
"PJSIP"
* chan_gulp.c is now chan_pjsip.c
* Function names in chan_gulp.c that were "gulp_*" are now "chan_pjsip_*"
* All files that were "res_sip*" are now "res_pjsip*"
* The "res_sip" directory is now "res_pjsip"
* Files in the "res_pjsip" directory that began with "sip_*" are now "pjsip_*"
* The configuration file is now "pjsip.conf" instead of "res_sip.conf"
* The module info for all PJSIP-related files now uses "PJSIP" instead of "SIP"
* CLI and AMI commands created by Asterisk's PJSIP modules now have "pjsip" as
the starting word instead of "sip"
git-svn-id: https://origsvn.digium.com/svn/asterisk/trunk@395764 65c4cc65-6c06-0410-ace0-fbb531ad65f3
