Currently, if a parking lot is full, bridge setup returns -1,
causing dialplan execution to terminate without TryExec.
However, such failures should be handled more gracefully,
the same way they are on other paths, as indicated by the
module's author, here:
http://lists.digium.com/pipermail/asterisk-dev/2018-December/077144.html
Now, callers will hear the parking failure announcement, and dialplan
will continue, which is consistent with existing failure modes.
Resolves: #624
(cherry picked from commit d0b51f1ff7)
In handle_negotiated_sdp the pending_media_state->read_callbacks must be
reset before they are added in the SDP handlers in
handle_negotiated_sdp_session_media. Otherwise, old callbacks for
removed streams and file descriptors could be added to the channel and
Asterisk would poll on non-existing file descriptors.
Resolves: #611
(cherry picked from commit f626af8e13)
Code was added in 030f7d41 to warn if an unrecognized option was
passed to an application, but code in Monitor was taking advantage of
the fact that the application would silently accept an invalid option.
We now recognize the invalid option but we don't do anything if it's
set.
Fixes#639
(cherry picked from commit 3c1a2daecd)
* Added checks for missing session, session->channel and rdata
in stir_shaken_incoming_request.
* Added checks for missing session, session->channel and tdata
in stir_shaken_outgoing_request.
Resolves: #645
Add a timeout option to control the amount of time
to wait if no early media is received before giving
up. This allows aborting early if the destination
is not being responsive.
Resolves: #588
UserNote: The timeout argument to Dial now allows
specifying the maximum amount of time to dial if
early media is not received.
(cherry picked from commit 17d6a08beb)
Most app_voicemail unit tests were not properly cleaning up
after themselves after running. This led to test mailboxes
lingering around in the system. It also meant that if any
unit tests in app_voicemail that create mailboxes were executed
and the module was not unloaded/loaded again prior to running
the test_voicemail_vm_info unit test, Asterisk would segfault
due to an attempt to copy a NULL string.
The load_config test did actually have logic to reinitialize
the config after the test. However, this did not work in practice
since load_config() would not reload the config since voicemail.conf
had not changed during the test; thus, additional logic has been
added to ensure that voicemail.conf is truly reloaded, after any
unit tests which modify the users list.
This prevents the SEGV due to invalid mailboxes lingering around,
and also ensures that the system state is restored to what it was
prior to the tests running.
Resolves: #629
(cherry picked from commit 564d22acc6)
This adds an option to allow preventing callers from leaving
messages marked as 'urgent'.
Resolves: #619
UserNote: The leaveurgent mailbox option can now be used to
control whether callers may leave messages marked as 'Urgent'.
(cherry picked from commit 166fc3c3d0)
This migrates the relevant schema objects from the `('yes', 'no')`
definition to the `('0', '1', 'off', 'on', 'false', 'true', 'yes', 'no')`
one.
Fixes#617
(cherry picked from commit 39199aac56)
In as_check_common_config, we were calling ast_std_free on
raw_key but raw_key was allocated with ast_malloc so it
should be freed with ast_free.
Resolves: #636
(cherry picked from commit 54464321a8)
The default location for the stir_shaken cache is
/var/lib/asterisk/keys/stir_shaken/cache but we were only creating
/var/lib/asterisk/keys/stir_shaken on istall. We now create
the cache sub-directory.
Resolves: #634
(cherry picked from commit 5a734afdde)
Why do we need a refactor?
The original stir/shaken implementation was started over 3 years ago
when little was understood about practical implementation. The
result was an implementation that wouldn't actually interoperate
with any other stir-shaken implementations.
There were also a number of stir-shaken features and RFC
requirements that were never implemented such as TNAuthList
certificate validation, sending Reason headers in SIP responses
when verification failed but we wished to continue the call, and
the ability to send Media Key(mky) grants in the Identity header
when the call involved DTLS.
Finally, there were some performance concerns around outgoing
calls and selection of the correct certificate and private key.
The configuration was keyed by an arbitrary name which meant that
for every outgoing call, we had to scan the entire list of
configured TNs to find the correct cert to use. With only a few
TNs configured, this wasn't an issue but if you have a thousand,
it could be.
What's changed?
* Configuration objects have been refactored to be clearer about
their uses and to fix issues.
* The "general" object was renamed to "verification" since it
contains parameters specific to the incoming verification
process. It also never handled ca_path and crl_path
correctly.
* A new "attestation" object was added that controls the
outgoing attestation process. It sets default certificates,
keys, etc.
* The "certificate" object was renamed to "tn" and had it's key
change to telephone number since outgoing call attestation
needs to look up certificates by telephone number.
* The "profile" object had more parameters added to it that can
override default parameters specified in the "attestation"
and "verification" objects.
* The "store" object was removed altogther as it was never
implemented.
* We now use libjwt to create outgoing Identity headers and to
parse and validate signatures on incoming Identiy headers. Our
previous custom implementation was much of the source of the
interoperability issues.
* General code cleanup and refactor.
* Moved things to better places.
* Separated some of the complex functions to smaller ones.
* Using context objects rather than passing tons of parameters
in function calls.
* Removed some complexity and unneeded encapsuation from the
config objects.
Resolves: #351Resolves: #46
UserNote: Asterisk's stir-shaken feature has been refactored to
correct interoperability, RFC compliance, and performance issues.
See https://docs.asterisk.org/Deployment/STIR-SHAKEN for more
information.
UpgradeNote: The stir-shaken refactor is a breaking change but since
it's not working now we don't think it matters. The
stir_shaken.conf file has changed significantly which means that
existing ones WILL need to be changed. The stir_shaken.conf.sample
file in configs/samples/ has quite a bit more information. This is
also an ABI breaking change since some of the existing objects
needed to be changed or removed, and new ones added. Additionally,
if res_stir_shaken is enabled in menuselect, you'll need to either
have the development package for libjwt v1.15.3 installed or use
the --with-libjwt-bundled option with ./configure.
(cherry picked from commit 181edcc3a3)
This adds a dummy migration to 18 and 20 so that our alembic heads are
synchronized across all supported branches.
In this case the migration we are stubbing (24c12d8e9014) is:
775352ee6c
(cherry picked from commit 6c3eaba7c6)
The new mode lists for each codec translation the actual real cost in cpu microseconds per second translated audio.
This allows to compare the real cpu usage of translations and helps in evaluation of codec implementation changes regarding performance (regression testing).
- add new table mode
- hide the 999999 comp values, as these only indicate an issue with transcoding
- hide the 0 values, as these also do not contain any information (only indicate a multistep transcoding)
Resolves: #601
(cherry picked from commit fe623aa081)
If a dynamic string is created with an initial length of 0,
`ast_str_buffer(…)` will return an invalid pointer.
This was a secondary discovery when fixing #65.
(cherry picked from commit 164001b05c)
Media Experience Score relies on incorrect pseudo_mos variable
calculation. According to forming an opinion section of the
documentation, calculation relies on ITU-T G.107 standard:
https://docs.asterisk.org/Deployment/Media-Experience-Score/#forming-an-opinion
ITU-T G.107 Annex B suggests to calculate MOS with a coefficient
"seven times ten to the power of negative six", 7 * 10^(-6). which
would mean 6 digits after the decimal point. Current implementation
has 7 digits after the decimal point, which downrates the calls.
Fixes: #597
(cherry picked from commit be96652612)
If ast_dsp_process is called with a codec besides slin, ulaw,
or alaw, a warning is logged that in-band DTMF is not supported,
but this message is not always appropriate or correct, because
ast_dsp_process is much more generic than just DTMF detection.
This logs a more generic message in those cases, and also improves
codec-mismatch logging throughout dsp.c by ensuring incompatible
codecs are printed out.
Resolves: #595
(cherry picked from commit c6f6d1a3ac)
Under rare circumstances, it's possible for the original audio
session in the active_media_state default_session to be corrupted
instead of removed when switching to the t38/image media session
during fax negotiation. This can cause a segfault when a "pjsip
show channelstats" attempts to print that audio media session's
rtp statistics. In these cases, the active_media_state
topology is correctly showing only a single t38/image stream
so we now check that there's an audio stream in the topology
before attempting to use the audio media session to get the rtp
statistics.
Resolves: #592
(cherry picked from commit 1aaf9e6a1d)
When started with a verbose level of 3, asterisk can emit over 1500
verbose message that serve no real purpose other than to fill up
logs. When asterisk shuts down, it emits another 1100 that are of
even less use. Since the testsuite runs asterisk with a verbose
level of 3, and asterisk starts and stops for every one of the 700+
tests, the number of log messages is staggering. Besides taking up
resources, it also makes it hard to debug failing tests.
This commit changes the log level for those verbose messages to 5
instead of 3 which reduces the number of log messages to only a
handful. Of course, NOTICE, WARNING and ERROR message are
unaffected.
There's also one other minor change...
ast_context_remove_extension_callerid2() logs a DEBUG message
instead of an ERROR if the extension you're deleting doesn't exist.
The pjsip_config_wizard calls that function to clean up the config
and has been triggering that annoying error message for years.
Resolves: #582
(cherry picked from commit 57d30c17b3)
The last time configure was run, it was run on a system that
did not enable -std=gnu11 by default, which meant that the
restrict qualifier would not be recognized on certain platforms.
This regenerates the configure files from running bootstrap.sh,
so that these should be recognized on all supported platforms.
Resolves: #586
(cherry picked from commit 72f4cf6798)
Fixes: #406
UserNote: Bundled pjproject has been upgraded to 2.14. For more
information on what all is included in this change, check out the
pjproject Github page: https://github.com/pjsip/pjproject/releases
(cherry picked from commit e6140eac0c)
Adds 'p' option to SpeechBackground() application.
With this option, when the app timeout is reached,
whatever the backend speech engine collected will
be returned as if it were the final, full result.
(This works for engines that make partial results.)
Resolves: #572
UserNote: The SpeechBackground dialplan application now supports a 'p'
option that will return partial results from speech engines that
provide them when a timeout occurs.
(cherry picked from commit d2de6a2158)
Given the scenario of passing an empty string to the
ast_strsep functions the functions would return NULL
instead of an empty string. This is counter to how
strsep itself works.
This change alters the behavior of the functions to
match that of strsep.
Fixes: #565
(cherry picked from commit 5e09e2afeb)
Adds the 'D' option to app chanspy that causes the input and output
frames of the spied channel to be interleaved in the spy output frame.
This allows the input and output of the spied channel to be decoded
separately by the receiver.
If the 'o' option is also set, the 'D' option is ignored as the
audio being spied is inherently one direction.
Fixes: #569
UserNote: The ChanSpy application now accepts the 'D' option which
will interleave the spied audio within the outgoing frames. The
purpose of this is to allow the audio to be read as a Dual channel
stream with separate incoming and outgoing audio. Setting both the
'o' option and the 'D' option and results in the 'D' option being
ignored.
(cherry picked from commit f31b981d92)
Need to update the github-script to v7 to squash deprecation
warnings.
Also fixed the API name for github.rest.pulls.requestReviewers.
(cherry picked from commit 305111e954)
Commit fa3922a4d2 fixed
a branching issue but "overshoots" when calculating
the next priority. This fixes that; accompanying
test suite tests have also been extended.
Resolves: #560
(cherry picked from commit aa5b9d1d9f)
Resolves a regression identified by @justinludwig involving the
rendering of IPv6 addresses in outgoing SDP.
Also updates `media_address` on PJSIP endpoints so that if we are able
to parse the configured value as an IP we store it in a format that we
can directly use later. Based on my reading of the code it appeared
that one could configure `media_address` as:
```
[foo]
type = endpoint
...
media_address = [2001:db8::]
```
And that value would be blindly copied into the outgoing SDP without
regard to its format.
Fixes#541
(cherry picked from commit 72523f19a9)
Currently, a reload will always occur if the
Reload header is provided for the UpdateConfig
action. However, we should not be doing a reload
if the header value has a falsy value, per the
documentation, so this makes the reload behavior
consistent with the existing documentation.
Resolves: #551
(cherry picked from commit 57bb985b26)
The numeric bridge profile options `internal_sample_rate` and
`maximum_sample_rate` are documented to accept the special values
`auto` and `none`, respectively. While these values currently work,
they also emit warnings when used which could be confusing for users.
In passing, also ensure that we only accept the documented range of
sample rate values between 8000 and 192000.
Fixes#546
(cherry picked from commit 9dd9615edf)
Adding a NoOp alembic script for the voicemail database to maintain
version sync with other branches.
Fixes: #527
(cherry picked from commit d6c10075f8)
This adds a CLI command to manually toggle the MWI status
of a channel, useful for troubleshooting or resetting
MWI devices, similar to the capabilities offered with
SIP messaging to manually control MWI status.
UserNote: The 'dahdi set mwi' now allows MWI on channels
to be manually toggled if needed for troubleshooting.
Resolves: #440
(cherry picked from commit 49ec57fc7c)
