Add live_dangerously flag to manager and use this flag to
determine if a configuation file outside of AST_CONFIG_DIR
should be read.
ASTERISK-30176
Change-Id: I46b26af4047433b49ae5c8a85cb8cda806a07404
Currently chan_pjsip on receiving a re-INVITE without SDP will only
return the codecs that are previously negotiated and not offering
all enabled codecs.
This causes interoperability issues with different equipment (e.g.
from Cisco) for some of our customers and probably also in other
scenarios involving 3PCC infrastructure.
According to RFC 3261, section 14.2 we SHOULD return all codecs
on a re-INVITE without SDP
The PR proposes a new parameter to configure this behaviour:
all_codecs_on_empty_reinvite. It includes the code, documentation,
alembic migrations, CHANGES file and example configuration additions.
ASTERISK-30193 #close
Change-Id: I69763708d5039d512f391e296ee8a4d43a1e2148
Expands the pjsip logger to support the ability to filter
by SIP message method. This can make certain types of SIP debugging
easier by only logging messages of particular method(s).
ASTERISK-30146 #close
Co-authored-by: Sean Bright <sean@seanbright.com>
Change-Id: I9c8cbb6fc8686ef21190eb42e08bc9a9b147707f
The PJSIP notify CLI commands allow for using
"options" configured in pjsip_notify.conf.
This allows these same options to be used in
AMI actions as well.
Additionally, as part of this improvement,
some repetitive common code is refactored.
ASTERISK-30263 #close
Change-Id: Ie4496b322b63b61eaf9672183a959ab99a04b6b5
Allows bridging, parking, and dial messages to be globally
ignored for all CDRs such that only a single CDR record
is generated per channel.
This is useful when CDRs should endure for the lifetime of
an entire channel and bridging and dial updates in the
dialplan should not result in multiple CDR records being
created for the call. With the ignore bridging option,
bridging changes have no impact on the channel's CDRs.
With the ignore dial state option, multiple Dials and their
outcomes have no impact on the channel's CDRs. The
last disposition on the channel is preserved in the CDR,
so the actual disposition of the call remains available.
These two options can reduce the amount of "CDR hacks" that
have hitherto been necessary to ensure that CDR was not
"spoiled" by these messages if that was undesired, such as
putting a dummy optimization-disabled local channel between
the caller and the actual call and putting the CDR on the channel
in the middle to ensure that CDR would persist for the entire
call and properly record start, answer, and end times.
Enabling these options is desirable when calls correspond
to the entire lifetime of channels and the CDR should
reflect that.
Current default behavior remains unchanged.
ASTERISK-30091 #close
Change-Id: I393981af42732ec5ac3ff9266444abb453b7c832
Adds support for detecting audible ringback tone
to the TONE_DETECT function using the p option.
ASTERISK-30254 #close
Change-Id: Ie2329ff245248768367d26749c285fbe823f6414
This patch adds support for mediasec SIP headers and SDP attributes.
These are defined in RFC 3329, 3GPP TS 24.229 and
draft-dawes-sipcore-mediasec-parameter. The new features are
implemented so that a backbone for RFC 3329 is present to streamline
future work on RFC 3329.
With this patch, Asterisk can communicate with Deutsche Telekom trunks
which require these fields.
ASTERISK-30032
Change-Id: Ia7f5b5ba42db18074fdd5428c4e1838728586be2
Adds the n "no answer" option to the Bridge application
so that answer supervision can not automatically
be provided when Bridge is executed.
Additionally, a mechanism (dialplan variable)
is added to prevent bridge targets (typically the
target of a masquerade) from answering the channel
when they enter the bridge.
ASTERISK-30223 #close
Change-Id: I76f73fcd8e403bcd18f2abb40c658f537ac1ba6d
Adds the n option to not answer the channel when calling
BridgeWait, so the application can be used without
forcing answer supervision.
ASTERISK-30216 #close
Change-Id: I6b85ef300b1f7b5170f8537e2b10889cc2e6605a
Adds an option that will play an audio file
to the party while AMD is running on the
channel, so the called party does not just
hear silence.
ASTERISK-30179 #close
Change-Id: I4af306274552b61b3d9f0883c33f698abd4699b6
Adds the EXPORT function, which allows write
access to variables and functions on other
channels.
ASTERISK-29432 #close
Change-Id: I7492645ae4307553d0f586d78e13a4f586231fdf
This patch adds a new option to the 100rel parameter for pjsip
endpoints called "peer_supported". When an endpoint with this option
receives an incoming request and the request indicated support for the
100rel extension, then Asterisk will send 1xx responses reliably. If
the request did not indicate 100rel support, Asterisk sends 1xx
responses normally.
ASTERISK-30158
Change-Id: Id6d95ffa8f00dab118e0b386146e99f254f287ad
Adds TRIM, LTRIM, and RTRIM, which can be used
for trimming leading and trailing whitespace
from strings.
ASTERISK-30222 #close
Change-Id: I50fb0c40726d044a7a41939fa9026f3da4872554
Adding user=phone to local-side uri's when user_eq_phone=yes is set for
an endpoint. Previously this would only add the header to the To and R-URI.
ASTERISK-30178
Change-Id: Id3bfb5d225d762e7d2668c023fe09e4541ae8600
This change adds an option, answeredonly, that will prevent music on
hold on channels that are not answered.
ASTERISK-30135
Change-Id: I1ab0defa43a29a26ae39f94c623596cf90fddc08
Adds an AMI event to indicate that a deadlock
has likely started, when Asterisk is compiled
with DETECT_DEADLOCKS enabled. This can make
it easier to perform automated deadlock detection
and take appropriate action (such as doing a core
dump). Unlike the deadlock warnings, the AMI event
is emitted only once per deadlock.
ASTERISK-30161 #close
Change-Id: Ifc6ed3e390f8b4cff7f8077a50e4d7a5b54e42fb
Adds the end_marked_any option, which can be used
to kick a user from a conference if any marked user
leaves.
ASTERISK-30211 #close
Change-Id: I9e8da7ccb892e522546c0f2b5476d172e022c2f5
Added an 'a' option to the GEOLOC_PROFILE function to allow
variable lists like location_info_refinement to be appended
to instead of replacing the entire list.
Added an 'r' option to the GEOLOC_PROFILE function to resolve all
variables before a read operation and after a Set operation.
Added a few missing parameters to the ones allowed for writing
with GEOLOC_PROFILE.
Fixed a bug where calling GEOLOC_PROFILE to read a parameter
might actually update the profile object.
Cleaned up XML documentation a bit.
ASTERISK-30190
Change-Id: I75f541db43345509a2e86225bfa4cf8e242e5b6c
You can now specify the location object's format, location_info,
method, location_source and confidence parameters directly on
a profile object for simple scenarios where the location
information isn't common with any other profiles. This is
mutually exclusive with setting location_reference on the
profile.
Updated appdocsxml.dtd to allow xi:include in a configObject
element. This makes it easier to link to complete configOptions
in another object. This is used to add the above fields to the
profile object without having to maintain the option descriptions
in two places.
ASTERISK-30185
Change-Id: Ifd5f05be0a76f0a6ad49fa28d17c394027677569
Added profile parameter "suppress_empty_ca_elements" that
will cause Civic Address elements that are empty to be
suppressed from the outgoing PIDF-LO document.
Fixed a possible SEGV if a sub-parameter value didn't have a
value.
ASTERISK-30177
Change-Id: I924ccc5aa2f45110a3155b22e53dfaf3ef2092dd
The trigger to perform outgoing geolocation processing is the
presence of a geoloc_outgoing_call_profile on an endpoint. This
is intentional so as to not leak location information to
destinations that shouldn't receive it. In a totally dynamic
configuration scenario however, there may not be any profiles
defined in geolocation.conf. This makes it impossible to do
outgoing processing without defining a "dummy" profile in the
config file.
This commit adds 4 built-in profiles:
"<prefer_config>"
"<discard_config>"
"<prefer_incoming>"
"<discard_incoming>"
The profiles are empty except for having their precedence
set and can be set on an endpoint to allow processing without
entries in geolocation.conf. "<discard_config>" is actually the
best one to use in this situation.
ASTERISK-30182
Change-Id: I1819ccfa404ce59802a3a07ad1cabed60fb9480a
This change adds support using the pjsip_tls_transport_restart
function for reloading the TLS certificate and key, if the filenames
remain unchanged. This is useful for Let's Encrypt and other
situations. Note that no restart of the transport will occur if
the certificate and key remain unchanged.
ASTERISK-30186
Change-Id: I9bc95a6bf791830a9491ad9fa43c17d4010028d0
Adds additional control options over the transfer
feature functionality to give users more control
in how the transfer feature sounds and works.
First, the "transfer" sound that plays when a transfer is
initiated can now be customized by the user in
features.conf, just as with the other transfer sounds.
Secondly, the user can now specify the transfer extension
in advance by using the TRANSFER_EXTEN variable. If
a valid extension is contained in this variable, the call
will automatically be transferred to this destination.
Otherwise, it will fall back to collecting the extension
from the user as is always done now.
ASTERISK-29899 #close
Change-Id: Ibff309caa459a2b958706f2ed0ca393b1ef502e3
* Added processing for the 'confidence' element.
* Added documentation to some APIs.
* removed a lot of complex code related to the very-off-nominal
case of needing to process multiple location info sources.
* Create a new 'ast_geoloc_eprofile_to_pidf' API that just takes
one eprofile instead of a datastore of multiples.
* Plugged a huge leak in XML processing that arose from
insufficient documentation by the libxml/libxslt authors.
* Refactored stylesheets to be more efficient.
* Renamed 'profile_action' to 'profile_precedence' to better
reflect it's purpose.
* Added the config option for 'allow_routing_use' which
sets the value of the 'Geolocation-Routing' header.
* Removed the GeolocProfileCreate and GeolocProfileDelete
dialplan apps.
* Changed the GEOLOC_PROFILE dialplan function as follows:
* Removed the 'profile' argument.
* Automatically create a profile if it doesn't exist.
* Delete a profile if 'inheritable' is set to no.
* Fixed various bugs and leaks
* Updated Asterisk WiKi documentation.
ASTERISK-30167
Change-Id: If38c23f26228e96165be161c2f5e849cb8e16fa0
Adds the DBGetTree action, which can be used to
retrieve all of the DB keys beginning with a
particular prefix, similar to the capability
provided by the database show CLI command.
ASTERISK-30136 #close
Change-Id: I3be9425e53be71f24303fdd4d2923c14e84337e6
Adds a POLARITY function which can be used to
retrieve the current polarity of an FXS channel
as well as set the polarity of an FXS channel
to idle or reverse at any point during a call.
ASTERISK-30000 #close
Change-Id: If6f50998f723e4484bf68e2473f5cedfeaf9b8f1
This commit adds res_pjsip_geolocation which gives chan_pjsip
the ability to use the core geolocation capabilities.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30128
Change-Id: Ie2e2bcd87243c2cfabc43eb823d4427c7086f4d9
This commit adds res_geolocation which creates the core capabilities
to manipulate Geolocation information on SIP INVITEs.
An upcoming commit will add res_pjsip_geolocation which will
allow the capabilities to be used with the pjsip channel driver.
This commit message is intentionally short because this isn't
a simple capability. See the documentation at
https://wiki.asterisk.org/wiki/display/AST/Geolocation
for more information.
THE CAPABILITIES IMPLEMENTED HERE MAY CHANGE BASED ON
USER FEEDBACK!
ASTERISK-30127
Change-Id: Ibfde963121b1ecf57fd98ee7060c4f0808416303
Adds a CLI command similar to "dialplan eval function" except for
applications: "dialplan exec application", useful for quickly
testing certain application behavior directly from the CLI
without writing any dialplan.
ASTERISK-30062 #close
Change-Id: I42e9fa9b60746c21450d40f99a026d48d2486dde
These new functions allow retrieving information from headers on 200 OK
INVITE response.
ASTERISK-29999
Change-Id: I264a610a9333359297a0825feb29a1bb4f4ad144
Rightly the use of wildcards in certificates is disallowed in accordance
with RFC5922. However, RFC2818 does make some allowances with regards to
their use when using subject alt names with DNS name types.
As such this patch creates a new setting for TLS transports called
'allow_wildcard_certs', which when it and 'verify_server' are both enabled
allows DNS name types, as well as the common name that start with '*.'
to match as a wildcard.
For instance: *.example.com
will match for: foo.example.com
Partial matching is not allowed, e.g. f*.example.com, foo.*.com, etc...
And the starting wildcard only matches for a single level.
For instance: *.example.com
will NOT match for: foo.bar.example.com
The new setting is disabled by default.
ASTERISK-30072 #close
Change-Id: If0be3fdab2e09c2a66bb54824fca406ebaac3da4
Adds an option to VoiceMailMain that prevents the user
from deleting messages during that application invocation.
This can be useful for public or shared mailboxes, where
some users should be able to listen to messages but not
delete them.
ASTERISK-30063 #close
Change-Id: Icdfb8423ae8d1fce65a056b603eb84a672e80a26
An m option to Park and ParkAndAnnounce now allows
specifying a music on hold class override.
ASTERISK-30087
Change-Id: I03de8d97b100e451b2611b5a621d48750f5d6a9e
Agi commnad exec can now evaluate dialplan functions and
variables if variable AGIEXECFULL is set to yes. this can
be useful when executing Playback or Read from agi.
ASTERISK-30058 #close
Change-Id: I669991f540496e7bddd096fec82b52c083036832
This change exposes the channel driver's unique id (i.e. the Call-ID
for chan_sip/chan_pjsip based channels) to ARI channel resources
as `protocol_id`.
ASTERISK-30027
Reported by: Moritz Fain
Tested by: Moritz Fain
Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87
Adds the CONFBRIDGE_CHANNELS function which can be used
to retrieve a comma-separated list of channels, filtered
by a particular type of participant category. This output
can then be used with functions like UNSHIFT, SHIFT, POP,
etc.
ASTERISK-30036 #close
Change-Id: I1950aff932437476dc1abab6f47fb4ac90520b83
Added the hear_own_join_sound option to the confbridge user profile to
control who hears the sound_join audio file. When set to 'yes' the user
entering the conference and the participants already in the conference
will hear the sound_join audio file. When set to 'no' the user entering
the conference will not hear the sound_join audio file, but the
participants already in the conference will hear the sound_join audio
file.
ASTERISK-29931
Added by Michael Cargile
Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2
Currently, if any custom ring cadences are specified, they are
appended to the array of cadences from wherever we left off
last time. This works properly the first time, but on subsequent
dahdi restarts, it means that the existing cadences are left
alone and (most likely) the same cadences are then re-added
afterwards. In short order, the cadence array gets maxed out
and the user begins seeing warnings that the array is full
and no more cadences may be added.
This buggy behavior persists until Asterisk is completely
restarted; however, if and when dahdi restart is run again,
then the same problem is reintroduced.
This fixes this behavior so that cadence parsing is more
idempotent, that is so running dahdi restart multiple times
starts adding cadences from the beginning, rather than from
wherever the last cadence was added.
As before, it is still not possible to revert to the default
cadences by simply removing all cadences in this manner, nor
is it possible to delete existing cadences. However, this
does make it possible to update existing cadences, which
was not possible before, and also ensures that the cadences
remain unchanged if the config remains unchanged.
ASTERISK-29990 #close
Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d
Some command line options to Asterisk only apply when Asterisk
is started and cannot be used with remote console mode. If a
user tries to use any of these, they are currently simply
silently ignored.
This prints out a warning if incompatible options are used,
informing users that an option used cannot be used with remote
console mode. Additionally, some clarifications are added to
the help text and man page.
ASTERISK-22246
ASTERISK-26582
Change-Id: I980a5380ef2c19e8ea348596396d5382893c4337
Adds the DB_KEYCOUNT function, which can be used to retrieve
the number of keys at a given prefix in AstDB.
ASTERISK-29968 #close
Change-Id: Ib2393b77b7e962dbaae6192f8576bc3f6ba92d09
This adds the EVAL_EXTEN function, which may be used to retrieve
the variable-substituted data at any extension.
ASTERISK-29486
Change-Id: Iad81019689674c9f4ac77d235f5d7234adbb1432
Adds the dialplan eval function commands to evaluate a dialplan
function from the CLI. The return value and function result are
printed out and can be used for testing or debugging.
ASTERISK-29820 #close
Change-Id: I833e97ea54c49336aca145330a2adeebfad05209
If Asterisk receives a SIP REFER with Session-Timers UAC
maintain Session-Timers when sending UPDATE"
ASTERISK-29843
Change-Id: I8e9a21c13bf757fa34d778f49ba3cf859b29ae5c
