Adds an option to VoiceMailMain that prevents the user
from deleting messages during that application invocation.
This can be useful for public or shared mailboxes, where
some users should be able to listen to messages but not
delete them.
ASTERISK-30063 #close
Change-Id: Icdfb8423ae8d1fce65a056b603eb84a672e80a26
An m option to Park and ParkAndAnnounce now allows
specifying a music on hold class override.
ASTERISK-30087
Change-Id: I03de8d97b100e451b2611b5a621d48750f5d6a9e
Agi commnad exec can now evaluate dialplan functions and
variables if variable AGIEXECFULL is set to yes. this can
be useful when executing Playback or Read from agi.
ASTERISK-30058 #close
Change-Id: I669991f540496e7bddd096fec82b52c083036832
This change exposes the channel driver's unique id (i.e. the Call-ID
for chan_sip/chan_pjsip based channels) to ARI channel resources
as `protocol_id`.
ASTERISK-30027
Reported by: Moritz Fain
Tested by: Moritz Fain
Change-Id: I7cc6e7a9d29efe74bc27811d788dac20fe559b87
Adds the CONFBRIDGE_CHANNELS function which can be used
to retrieve a comma-separated list of channels, filtered
by a particular type of participant category. This output
can then be used with functions like UNSHIFT, SHIFT, POP,
etc.
ASTERISK-30036 #close
Change-Id: I1950aff932437476dc1abab6f47fb4ac90520b83
Added the hear_own_join_sound option to the confbridge user profile to
control who hears the sound_join audio file. When set to 'yes' the user
entering the conference and the participants already in the conference
will hear the sound_join audio file. When set to 'no' the user entering
the conference will not hear the sound_join audio file, but the
participants already in the conference will hear the sound_join audio
file.
ASTERISK-29931
Added by Michael Cargile
Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2
Currently, if any custom ring cadences are specified, they are
appended to the array of cadences from wherever we left off
last time. This works properly the first time, but on subsequent
dahdi restarts, it means that the existing cadences are left
alone and (most likely) the same cadences are then re-added
afterwards. In short order, the cadence array gets maxed out
and the user begins seeing warnings that the array is full
and no more cadences may be added.
This buggy behavior persists until Asterisk is completely
restarted; however, if and when dahdi restart is run again,
then the same problem is reintroduced.
This fixes this behavior so that cadence parsing is more
idempotent, that is so running dahdi restart multiple times
starts adding cadences from the beginning, rather than from
wherever the last cadence was added.
As before, it is still not possible to revert to the default
cadences by simply removing all cadences in this manner, nor
is it possible to delete existing cadences. However, this
does make it possible to update existing cadences, which
was not possible before, and also ensures that the cadences
remain unchanged if the config remains unchanged.
ASTERISK-29990 #close
Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d
Some command line options to Asterisk only apply when Asterisk
is started and cannot be used with remote console mode. If a
user tries to use any of these, they are currently simply
silently ignored.
This prints out a warning if incompatible options are used,
informing users that an option used cannot be used with remote
console mode. Additionally, some clarifications are added to
the help text and man page.
ASTERISK-22246
ASTERISK-26582
Change-Id: I980a5380ef2c19e8ea348596396d5382893c4337
Adds the DB_KEYCOUNT function, which can be used to retrieve
the number of keys at a given prefix in AstDB.
ASTERISK-29968 #close
Change-Id: Ib2393b77b7e962dbaae6192f8576bc3f6ba92d09
This adds the EVAL_EXTEN function, which may be used to retrieve
the variable-substituted data at any extension.
ASTERISK-29486
Change-Id: Iad81019689674c9f4ac77d235f5d7234adbb1432
Adds the dialplan eval function commands to evaluate a dialplan
function from the CLI. The return value and function result are
printed out and can be used for testing or debugging.
ASTERISK-29820 #close
Change-Id: I833e97ea54c49336aca145330a2adeebfad05209
If Asterisk receives a SIP REFER with Session-Timers UAC
maintain Session-Timers when sending UPDATE"
ASTERISK-29843
Change-Id: I8e9a21c13bf757fa34d778f49ba3cf859b29ae5c
PJSIP currently is capable of receiving flash events
and converting them to FLASH control frames, but it
currently lacks support for doing the reverse: taking
a FLASH control frame and converting it into a flash
event in the SIP domain.
This adds the ability for PJSIP to process flash control
frames by converting them into the appropriate SIP INFO
message, which can then be sent to the peer. This allows,
for example, flash events to be sent between Asterisk
systems using PJSIP.
ASTERISK-29941 #close
Change-Id: I1590221a4d238597f79672fa5825dd4a920c94dd
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
The async_operations setting on a transport configures how
many simultaneous incoming packets the transport can handle
when multiple threads are polling and waiting on the transport.
As we only use a single thread this was needlessly creating
incoming packets when set to a non-default value, wasting memory.
ASTERISK-30006
Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f
Some databases depending on their configuration using backslashes
for escaping. When combined with the use of ' this can result in
a broken func_odbc query.
This change adds a SQL_ESC_BACKSLASHES dialplan function which can
be used to escape the backslashes.
This is done as a dialplan function instead of being always done
as some databases do not require this, and always doing it would
result in incorrect data being put into the database.
ASTERISK-29838
Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d
Adds the m option to the Queue application, which allows a
music on hold class to be specified at runtime which will
override the class configured in queues.conf.
This option functions like the m option to Dial.
ASTERISK-29876 #close
Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7
This patch makes the Resource List Subscriptions (RLS) dynamic.
The asterisk updates the current subscriptions to reflect the changes
to the list on the subscriptions refresh. If list items are added,
removed, updated or do not exist anymore, the asterisk regenerates
the resource list.
ASTERISK-29906 #close
Change-Id: Icee8c00459a7aaa43c643d77ce6f16fb7ab037d3
This adds a new AMI action called QueueWithdrawCaller.
This AMI action makes it possible to withdraw a caller from a queue,
in a safe and a generic manner.
This can be useful for retrieving a specific call and
dispatching it to a specific extension.
It works by signaling the caller to exit the queue application
whenever it can. Therefore, it is not guaranteed
that the call will leave the queue.
ASTERISK-29909 #close
Change-Id: Ic15aa238e23b2884abdcaadff2fda7679e29b7ec
The disabledevents setting has been added to the general section
in manager.conf, which allows users to specify events that
should be globally disabled and not sent to any AMI listeners.
This allows for processing of these AMI events to end sooner and,
for frequent AMI events such as Newexten which users may not have
any need for, allows them to not be processed. Additionally, it also
cleans up core debug as previously when debug was 3 or higher,
the debug was constantly spammed by "Analyzing AMI event" messages
along with a complete dump of the event contents (often for Newexten).
ASTERISK-29853 #close
Change-Id: Id42b9a3722a1f460d745cad1ebc47c537fd4f205
Adds the lastcontext and lastexten channel fields to allow users
to access previous dialplan execution locations.
ASTERISK-29840 #close
Change-Id: Ib455fe300cc8e9a127686896ee2d0bd11e900307
Adds the since tag to the documentation DTD so
that individual applications, functions, etc.
can now specify when they were added to Asterisk.
This tag is added at the individual application,
function, etc. level as opposed to at the module
level because modules can expand over time as new
functionality is added, and granularity only
to the module level would generally not be useful.
This enables the ability to more easily determine
when new functionality was added to Asterisk, down
to minor version as opposed to just by major version.
This makes it easier for users to write more portable
dialplan if desired to not use functionality that may
not be widely available yet.
ASTERISK-29896 #close
Change-Id: Ibbb35c702d8038bdc3fd0a944fbfa69384cc15d5
Whereas BLFs allow to show a display name for each RLS entry,
the asterisk provides only the extension now.
This is not end user friendly.
This commit adds a new resource_list option, resource_display_name,
to indicate whether display name of resource or the resource name being
provided for RLS entries.
If this option is enabled, the Display Name will be provided.
This option is disabled by default to remain the previous behavior.
If the 'event' set to 'presence' or 'dialog' the non-empty HINT name
will be set as the Display Name.
The 'message-summary' is not supported yet.
ASTERISK-29891 #close
Change-Id: Ic5306bd5a7c73d03f5477fe235e9b0f41c69c681
Adds an option to the ReceiveMF application to allow specifying a
maximum number of digits.
Originally, this capability was not added to ReceiveMF as it was
with ReceiveSF because typically a ST digit is used to denote that
sending of digits is complete. However, there are certain signaling
protocols which simply transmit a digit (such as Expanded In-Band
Signaling) and for these, it's necessary to be able to read a
certain number of digits, as opposed to until receiving a ST digit.
This capability is added as an option, as opposed to as a parameter,
to remain compatible with existing usage (and not shift the
parameters).
ASTERISK-29877 #close
Change-Id: I4229167c9aa69b87402c3c2a9065bd8dfa973a0b
There are a lot of Queue AMI actions and Queue applications
which do not load queue and queue members from Realtime.
AMI actions
QueuePause - if queue not in memory - response "Interface not found".
QueueStatus/QueueSummary - if queue not in memory - empty response.
Applications:
PauseQueueMember - if queue not in memory
Attempt to pause interface %s, not found
UnpauseQueueMember - if queue not in memory
Attempt to unpause interface xxxxx, not found
This patch adds a new function load_realtime_queues
which loads queue and queue members for desired queue
or all queues and all members if param 'queuename' is NULL or empty.
Calls the function load_realtime_queues when needed.
Also this patch fixes leak of ast_config in function set_member_value.
Also this patch fixes incorrect LOG_WARNING when pausing/unpausing
already paused/unpaused member.
The function ast_update_realtime returns 0 when no record modified.
So 0 is not an error to warn about.
ASTERISK-29873 #close
ASTERISK-18416 #close
ASTERISK-27597 #close
Change-Id: I554ee0eebde93bd8f49df7f84b74acb21edcb99c
The XML Manager Event Interface (amxml) now generates attribute names
that are compliant with the XML 1.1 specification. Previously, an
attribute name that started with a digit would be rendered as-is, even
though attribute names must not begin with a digit. We now prefix
attribute names that start with a digit with an underscore ('_') to
prevent XML validation failures.
This is not backwards compatible but my assumption is that compliant
XML parsers would already have been complaining about this.
ASTERISK-29886 #close
Change-Id: Icfaa56a131a082d803e9b7db5093806d455a0523
Adds a new option, defaultenabled, to the CDR core to
control whether or not CDR is enabled on a newly created
channel. This allows CDR to be disabled by default on
new channels and require the user to explicitly enable
CDR if desired. Existing behavior remains unchanged.
ASTERISK-29808 #close
Change-Id: Ibb78c11974bda229bbb7004b64761980e0b2c6d1
if holdtime is (0 min, 0 sec) there is no hold time announcements
we should then also not playing queue-thankyou
ASTERISK-29831
Change-Id: Ic7e51dcde526b23f1cd8d24e1d1e2d81e10f9d2c
There are times when you need to troubleshoot issues with bundled
pjproject or add new features that need to be pushed upstream
but...
* The source directory created by extracting the pjproject tarball
is not scanned for code changes so you have to keep forcing
rebuilds.
* The source directory isn't a git repo so you can't easily create
patches, do git bisects, etc.
* Accidentally doing a make distclean will ruin your day by wiping
out the source directory, and your changes.
* etc.
This commit makes that easier.
See third-party/pjproject/README-hacking.md for the details.
ASTERISK-29824
Change-Id: Idb1251040affdab31d27cd272dda68676da9b268
adding support for playing the correct en/et for nordic languages
by adding 'n' for neuter gender in the relevant ast_say_number
ASTERISK-29827
Change-Id: I03ebc827d2f0dc95132ab2f42799893c70edc5b1
Adds a command to the CLI to unload and then
load a module. This makes it easier to perform
these operations which are often done
subsequently to load a new version of a module.
"module reload" already refers to reloading of
configuration, so the name "refresh" is chosen
instead.
ASTERISK-29807 #close
Change-Id: I595f6f11774a0de2565a1fba38da22309ce93a2c
added that we set DIALEDPEERNUMBER on the outgoing channels
so it is avalible in b(content^extension^line)
this add the same behaviour as Dial
ASTERISK-29795
Change-Id: Icbc589ea2066f0c401a892bf478f6b2fd44e62f6
added support for playing the correct plural sound file
dependen on where you have 1 or multipe messages
based on the existing SE/NO code
ASTERISK-29797
Change-Id: I88aa814d02f3772bb80b474204b1ffb26fe438c2
Adds a ReceiveText application that can be used in
conjunction with SendText. Currently, there is no
way in Asterisk to receive text in the dialplan
(or anywhere else, really). This allows for Asterisk
to be the recipient of text instead of just the sender.
ASTERISK-29759 #close
Change-Id: Ica2c354a42bff69f323a0493d3a7cd0fb129d52d
Adds the JSON_DECODE function for parsing JSON in the
dialplan. JSON parsing already exists in the Asterisk
core and is used for many different things. This
function exposes the basic parsing capability to
the user in the dialplan, for instance, in conjunction
with CURL for using API responses.
ASTERISK-29706 #close
Change-Id: Iea60c49a7358dfdc2db60803cdc9a742f808ba2c
Adds tech-agnostic support for MF signaling by adding
MF sender and receiver applications as well as Dial
integration.
ASTERISK-29496-mf #do-not-close
Change-Id: I61962b359b8ec4cfd05df877ddf9f5b8f71927a4
Otherwise, the value 'false' was not found in the enumerated set of
the XML DTD for the XML attribute 'required' in the XML element
'parameter'. Therefore, DTD validation of the runtime XML failed.
ASTERISK-29790
Change-Id: Id13f230ad65a70dd8c2e3ae9ac85d1e841aed03e
In developer mode, use internal documentation as well.
This should produce no warnings. Fix yours!
In noisy mode, output all possible warnings of Doxygen.
This creates zillion of warnings. Double-check your current module!
Any warnings are in the file './doxygen.log'. Beside that, this change
avoids deprecated parameters because the configuration file for Doxygen
contains only those parameters which differ from the default. This
avoids the need to update the file on each run. Furthermore, it adds
AST_VECTOR to be expanded. Finally, the default name for that file is
Doxyfile. Therefore, let us use that!
ASTERISK-26991
ASTERISK-20259
Change-Id: I4129092a199d5e24c319a09cd088614b121015af
Newer versions of spandsp did refactoring of code to add new features
like color FAXing. This refactoring broke backwards compatibility.
Add support for the new version while retaining support for 0.0.6.
ASTERISK-29729 #close
Change-Id: I3bd74550604ebcf0304528d647fa39abc62fbaa1
Makes basic call progress tone detection available
in a tech-agnostic manner with the addition of the
ToneScan application. This can determine if the channel
has encountered a busy signal, SIT tones, dial tone,
modem, fax machine, etc. A few basic async progress
tone detect options are also added to the TONE_DETECT
function.
ASTERISK-29720 #close
Change-Id: Ia02437e0450473031e294798b8cb421fb8f24e90
Historically, the dial syntax for IAX2 has held that
an outkey (used only for RSA authenticated calls)
and a secret (used only for plain text and MD5 authenticated
calls, historically) were mutually exclusive, and thus
the same position in the dial string was used for both
values.
Now that encryption is possible with RSA authentication,
this poses a limitation, since encryption requires a
secret and RSA authentication requires an outkey. Thus,
the dial syntax is extended so that both a secret and
an outkey can be specified.
The new extended syntax is backwards compatible with the
old syntax. However, a secret can now be specified after
the outkey, or the outkey can be specified after the secret.
This makes it possible to spawn an encrypted RSA authenticated
call without a corresponding peer being predefined in iax.conf.
ASTERISK-29707 #close
Change-Id: I1f8149313ed760169d604afbb07720a8b07dd00e
