This is needed to be able to restore it in REGISTER responses,
otherwise the client won't be able to find the contact it created.
ASTERISK-30042
Change-Id: I0c5823918199acf09246b3b206fbde66773688f6
Adds the CONFBRIDGE_CHANNELS function which can be used
to retrieve a comma-separated list of channels, filtered
by a particular type of participant category. This output
can then be used with functions like UNSHIFT, SHIFT, POP,
etc.
ASTERISK-30036 #close
Change-Id: I1950aff932437476dc1abab6f47fb4ac90520b83
Currently, the operator services mode in DAHDI is broken and unusable.
The actual operator recall functionality works properly; however,
when the operator hangs up (which is the only way that such a call
is allowed to end), both lines are permanently taken out of service
until "dahdi restart" is run. This prevents this feature from being
used.
Operator mode is one of the few factors that can cause the general
analog event handling in sig_analog not to be used. Several years
back, much of the analog handling was moved from chan_dahdi to
sig_analog. However, this was not done fully or consistently at
the time, and when operator mode is active, sig_analog does not
get used. Generally this is correct, but in the case of hangup
it should be using sig_analog regardless of the operator mode;
otherwise, the lines do not properly clear and they become unusable.
This bug is fixed so the operator can now hang up and properly
release the call. It is treated just like any other hangup. The
operator mode functionality continues to work as it did before.
ASTERISK-29993 #close
Change-Id: Ib2e3ddb40d9c71e8801e0b4bb0a12e2b52f51d24
Most issues were in stringfields and had to do with comparing
a pointer to an constant/interned string with NULL. Since the
string was a constant, a pointer to it could never be NULL so
the comparison was always "true". gcc now complains about that.
There were also a few issues where determining if there was
enough space for a memcpy or s(n)printf which were fixed
by defining some of the involved variables as "volatile".
There were also a few other miscellaneous fixes.
ASTERISK-30044
Change-Id: Ia081ca1bcfb329df6487c4660aaf1944309eb570
Documents the Dial syntax for DAHDI, namely the channel group,
distinctive ring, answer confirmation, and digital call options
that are specified in the resource itself.
ASTERISK-24827 #close
Change-Id: Ib95e78497fb00dc5cbfde1c93a69f034bfd08c30
For lines that have mailboxes configured on them, with
FSK MWI, DAHDI will periodically try to dispatch FSK
to update MWI. However, this is never supposed to be
done when a channel is not idle.
There is currently an edge case where MWI FSK can
extraneously get spooled for the channel if a caller
hook flashes and hangs up, which triggers a recall ring.
After one ring, the on hook time threshold in this if
condition has been satisfied and an MWI update is spooled.
This means that when the phone is picked up again, the
answerer gets an FSK spill before being reconnected to
the party on hold.
To prevent this, we now explicitly check to ensure that
subchannel 0 has no owner. There is no owner when DAHDI
channels are idle, but if the channel is "in use" in some
way (such as in the aforementioned scenario), then there
is an owner, and we shouldn't process MWI at this time.
ASTERISK-28518 #close
Change-Id: Ia3904434fd81688d71742f7e84358b7e1c38e92a
Added the hear_own_join_sound option to the confbridge user profile to
control who hears the sound_join audio file. When set to 'yes' the user
entering the conference and the participants already in the conference
will hear the sound_join audio file. When set to 'no' the user entering
the conference will not hear the sound_join audio file, but the
participants already in the conference will hear the sound_join audio
file.
ASTERISK-29931
Added by Michael Cargile
Change-Id: I856bd66dc0dfa057323860a6418c1371d249abd2
Currently, if any custom ring cadences are specified, they are
appended to the array of cadences from wherever we left off
last time. This works properly the first time, but on subsequent
dahdi restarts, it means that the existing cadences are left
alone and (most likely) the same cadences are then re-added
afterwards. In short order, the cadence array gets maxed out
and the user begins seeing warnings that the array is full
and no more cadences may be added.
This buggy behavior persists until Asterisk is completely
restarted; however, if and when dahdi restart is run again,
then the same problem is reintroduced.
This fixes this behavior so that cadence parsing is more
idempotent, that is so running dahdi restart multiple times
starts adding cadences from the beginning, rather than from
wherever the last cadence was added.
As before, it is still not possible to revert to the default
cadences by simply removing all cadences in this manner, nor
is it possible to delete existing cadences. However, this
does make it possible to update existing cadences, which
was not possible before, and also ensures that the cadences
remain unchanged if the config remains unchanged.
ASTERISK-29990 #close
Change-Id: Ie32ea3e8a243b766756b1afce684d4a31ee7421d
Currently, if attempting to place a call to a peer that only allows
RSA authentication, if we fail to provide an outkey when placing
the call, Asterisk will crash.
This exposes the broader issue that IAX2 is prone to causing a crash
if encryption or decryption is attempted but we never initialized
the encryption and decryption keys. In other words, if the logic
to use encryption in chan_iax2 is not perfectly aligned with the
decision to build keys in the first place, then a crash is not
only possible but probable. This was demonstrated by ASTERISK_29264,
for instance.
This permanently prevents such events from causing a crash by explicitly
checking that keys are initialized properly before setting the flags
to use encryption for the call. Instead of crashing, the call will
now abort.
ASTERISK-30007 #close
Change-Id: If925c3d86099ceac7f621804f2532baac5050c9a
A bug in menuselect can cause modules that are disabled
by default to be recompiled every time a recompilation
occurs. This occurs for module categories that are NOT
positive output, as for these categories, the modules
contained in the makeopts file indicate modules which
should NOT be selected. The existing procedure of iterating
through these modules to mark modules as present is thus
insufficient. This has led to modules with a default_enabled
tag of "no" to get deleted and recompiled every time, even
when they haven't changed.
To fix this, we now modify the mark as present behavior
for module categories that are not positive output. For
these, we start by iterating through the module tree
and marking all modules as present, then go back and
mark anything contained in the makeopts file as not
present. This ensures that makeopt selections are actually
used properly, regardless of whether a module category
uses positive output or not.
ASTERISK-29728 #close
Change-Id: Idf2974c4ed8d0ba3738a92f08a6082b234277b95
The admin_exec function in app_meetme is used by the SLA
applications for internal bridging. However, in these cases,
chan is NULL. Currently, this function will set some status
variables that are intended for a channel, but since channel
is NULL, this is erroneously creating meaningless global
variables, which shouldn't be happening. This sets these
variables only if chan is not NULL.
ASTERISK-30002 #close
Change-Id: I817df6c26f5bda131678e56791b0b61ba64fc6f7
Adds the DB_KEYCOUNT function, which can be used to retrieve
the number of keys at a given prefix in AstDB.
ASTERISK-29968 #close
Change-Id: Ib2393b77b7e962dbaae6192f8576bc3f6ba92d09
According to chan_dahdi.conf, up to 64 groups (numbered
0 through 63) can be used when dialing DAHDI channels.
However, currently dialing round robin with a group number
greater than 31 fails because the array for the round robin
structure is only size 32, instead of 64 as it should be.
This fixes that so the round robin array size is consistent
with the actual groups capacity.
ASTERISK-29994
Change-Id: I4caa08d7025f78ac75a0539f71aaf3eb3e85b3b7
Some command line options to Asterisk only apply when Asterisk
is started and cannot be used with remote console mode. If a
user tries to use any of these, they are currently simply
silently ignored.
This prints out a warning if incompatible options are used,
informing users that an option used cannot be used with remote
console mode. Additionally, some clarifications are added to
the help text and man page.
ASTERISK-22246
ASTERISK-26582
Change-Id: I980a5380ef2c19e8ea348596396d5382893c4337
This adds the EVAL_EXTEN function, which may be used to retrieve
the variable-substituted data at any extension.
ASTERISK-29486
Change-Id: Iad81019689674c9f4ac77d235f5d7234adbb1432
If Asterisk receives a SIP REFER with Session-Timers UAC
maintain Session-Timers when sending UPDATE"
ASTERISK-29843
Change-Id: I8e9a21c13bf757fa34d778f49ba3cf859b29ae5c
Currently, if a user uses an application like ControlPlayback
to try to rewind a file past the beginning, this can throw
warnings when the file format (e.g. PCM) tries to seek to
a negative offset.
Instead of letting file formats try (and fail) to seek a
negative offset, we instead now catch this in the rewind
function to ensure that we never seek an offset less than 0.
This prevents legitimate user actions from triggering warnings
from any particular file formats.
ASTERISK-29943 #close
Change-Id: Ia53f2623f57898f4b8e5c894b968b01e95426967
PJSIP currently is capable of receiving flash events
and converting them to FLASH control frames, but it
currently lacks support for doing the reverse: taking
a FLASH control frame and converting it into a flash
event in the SIP domain.
This adds the ability for PJSIP to process flash control
frames by converting them into the appropriate SIP INFO
message, which can then be sent to the peer. This allows,
for example, flash events to be sent between Asterisk
systems using PJSIP.
ASTERISK-29941 #close
Change-Id: I1590221a4d238597f79672fa5825dd4a920c94dd
Adds the dialplan eval function commands to evaluate a dialplan
function from the CLI. The return value and function result are
printed out and can be used for testing or debugging.
ASTERISK-29820 #close
Change-Id: I833e97ea54c49336aca145330a2adeebfad05209
Adds version information for applications, functions,
and manager events/actions.
This is not completely exhaustive by any means but
covers most new things added that have release
versioning information in the issue tracker.
ASTERISK-29940 #close
Change-Id: I506401e93c799715dbbe97c0a8ba18af2bf5e131
if Asterisk need to send an UPDATE before answer
on a channel that uses Record-Route:
it will not include a Route header
ASTERISK-29955
Change-Id: Id1920ecbfea7739a038b14dc94487ecfe7b57eef
added new global config option "allow_sending_180_after_183"
that if enabled will preserve 180 after a 183
ASTERISK-29842
Change-Id: I8a53f8c35595b6d16d8e86e241b5f110d92f3d18
On a write error to an AMI session a flag was set to
indicate that the write error had occurred, with the
expected result being that the session be terminated.
This was not actually happening and instead writing
would continue to be attempted.
This change adds a check for the write error and causes
the session to actually terminate.
ASTERISK-29948
Change-Id: Icaf5d413d4c0d5dc78292a17287fecc8720a31a5
Patch provided inline by Yury Kirsanov on the linked issue and
approved by Josh Colp.
ASTERISK-29253 #close
Change-Id: I5b9ccc67ebf06e875ed061d9e7fc21f47b0a4e1f
There was an issue with the conditional where STIR/SHAKEN would be
enabled even when not configured. It has been changed to ensure that if
a profile does not exist and stir_shaken is not set in pjsip.conf, then
the conditional will return from the function without performing
STIR/SHAKEN operations.
ASTERISK-30024
Change-Id: I41286a3d35b033ccbfbe4129427a62cb793a86e6
The async_operations setting on a transport configures how
many simultaneous incoming packets the transport can handle
when multiple threads are polling and waiting on the transport.
As we only use a single thread this was needlessly creating
incoming packets when set to a non-default value, wasting memory.
ASTERISK-30006
Change-Id: I1915973ef352862dc2852a6ba4cfce2ed536e68f
When executing dial, the topology of the inbound channel is cloned and
used for the outbound channel. This creates issues when an incoming
stream is sendonly or recvonly as the stream state of the outbound
channel will be the same as the stream state of the inbound channel.
Now the stream state is flipped for the outgoing stream in
dial_exec_full if the incoming stream topology is recvonly or sendonly.
The same is the case for unreal (local) channels which create a second
(;2) channel as a counterpart which clones the topology of the
first channel. Now the stream state is flipped for the streams of
the 2nd channel in ast_unreal_new_channels if the incoming stream
topology is recvonly or sendonly.
ASTERISK-29655
Reported by: Michael Auracher
ASTERISK-29638
Reported by: Michael Auracher
Change-Id: I294dc834ac9a5f048b101b691669959e9df630e1
Chrome has added more attributes, causing the limit to be
exceeded. This raises it up some more.
ASTERISK-30015
Change-Id: I964957c005c4e6f7871b15ea1ccd9b4659c7ef32
Adds a new configuration option, stir_shaken_profile, in pjsip.conf that
can be specified on a per endpoint basis. This option will reference a
stir_shaken_profile that can be configured in stir_shaken.conf. The type
of this option must be 'profile'. The stir_shaken option can be
specified on this object with the same values as before (attest, verify,
on), but it cannot be off since having the profile itself implies wanting
STIR/SHAKEN support. You can also specify an ACL from acl.conf (along
with permit and deny lines in the object itself) that will be used to
limit what interfaces Asterisk will attempt to retrieve information from
when reading the Identity header.
ASTERISK-29476
Change-Id: I87fa61f78a9ea0cd42530691a30da3c781842406
Some databases depending on their configuration using backslashes
for escaping. When combined with the use of ' this can result in
a broken func_odbc query.
This change adds a SQL_ESC_BACKSLASHES dialplan function which can
be used to escape the backslashes.
This is done as a dialplan function instead of being always done
as some databases do not require this, and always doing it would
result in incorrect data being put into the database.
ASTERISK-29838
Change-Id: I152bf34899b96ddb09cca3e767254d8d78f0c83d
Put checks in place to limit how much we will actually download, as well
as a check for the data we receive at the start to ensure it begins with
what we would expect a certificate to begin with.
ASTERISK-29872
Change-Id: Ifd3c6b8bd52b8b6192a04166ccce4fc8a8000b46
The ReceiveMF and ReceiveSF applications currently always
return 0, even if a channel has hung up. The call will still
end but generally applications are expected to return -1 if
the channel has hung up.
We now return -1 if a hangup occured to bring this behavior
in line with this norm. This has no functional impact, but
merely increases conformity with how these modules interact
with the PBX core.
ASTERISK-29951 #close
Change-Id: I234d755050ab8ed58f197c6925b968ba26b14033
Adds the m option to the Queue application, which allows a
music on hold class to be specified at runtime which will
override the class configured in queues.conf.
This option functions like the m option to Dial.
ASTERISK-29876 #close
Change-Id: Ie25a48569cf8755c305c9438b1ed292c3adcf8d7
Currently, if a user tries to access a non-dynamic
MeetMe conference and the conference is not found,
the call simply silent hangs up. There is no indication
to the user that anything went wrong at all.
This changes the relevant debug message to a warning
so that the user is notified of this invalidity.
ASTERISK-29954 #close
Change-Id: Iebcfae3755d00f2150d676ee211c57bc59530048
This change removes patches which have been merged into
upstream and updates some existing ones. It also adds
some additional config_site.h changes to restore previous
behavior, as well as a patch to allow multiple Authorization
headers. There seems to be some confusion or disagreement
on language in RFC 8760 in regards to whether multiple
Authorization headers are supported. The RFC implies it
is allowed, as does some past sipcore discussion. There is
also the catch all of "local policy" to allow it. In
the case of Asterisk we allow it.
ASTERISK-29351
Change-Id: Id39ece02dedb7b9f739e0e37ea47d76854af7191
When adding headers to an outgoing request the headers were cloned using
the dialog's pool when they should have been cloned using tdata's pool.
Under certain circumstances it was possible for the dialog object, and
its pool, to be freed while tdata is still active and available. Thus the
cloned header "disappeared", and when tdata tried to later access it a
crash would occur.
This patch makes it so all added headers are cloned appropriately using
tdata's pool.
ASTERISK-29411 #close
ASTERISK-29535 #close
Change-Id: I9852025b5ee93ce1c038209150ee9dba1e0767c5
The PBX core uses the stack when it comes to includes, which
means that a context can only contain strictly fewer than
AST_PBX_MAX_STACK includes. If this is exceeded, then warnings
will be emitted for each number of includes beyond this if
searching for an extension in the including context, and if
the extension's inclusion is beyond the stack size, it will
simply not be found.
To address this, we now check if there are too many includes
in a context when the dialplan is reloaded so that if there
is an issue, the user is aware of at "compile time" as opposed
to "run time" only. Secondly, more details are printed out
when this message is encountered so it's clear what has happened.
ASTERISK-26719
Change-Id: Ia3700452e75a7af3391b3e82ee69f06a669f8958
Adds an option to the ReceiveMF application to allow specifying a
maximum number of digits.
Originally, this capability was not added to ReceiveMF as it was
with ReceiveSF because typically a ST digit is used to denote that
sending of digits is complete. However, there are certain signaling
protocols which simply transmit a digit (such as Expanded In-Band
Signaling) and for these, it's necessary to be able to read a
certain number of digits, as opposed to until receiving a ST digit.
This capability is added as an option, as opposed to as a parameter,
to remain compatible with existing usage (and not shift the
parameters).
ASTERISK-29877 #close
Change-Id: I4229167c9aa69b87402c3c2a9065bd8dfa973a0b
(cherry picked from commit 0da713168d)
make_xml_documentation was being called with the --validate
flag set when it shouldn't have been. This was causing
build failures if neither xmllint nor xmlstarlet were installed.
The correct behavior is to simply print a message that either
one of those tools should be installed for validation and
continue with the build.
ASTERISK-29988
Change-Id: Idc6c44114e7dd3fadae183a4e22f4fdba0b8a645
get_sourceable_makeopts wasn't handling variables with embedded
double quotes in them very well. One example was the DOWNLOAD
variable when curl was being used instead of wget. Rather than
trying to fix get_sourceable_makeopts, it's just been removed.
ASTERISK-29986
Reported by: Stefan Ruijsenaars
Change-Id: Idf2a90902228c2558daa5be7a4f8327556099cd2
The iax2 show netstats command previously didn't contain
enough spacing in the header to properly align the table
header with the table body. This caused column headers
to not align with the values on longer channel names.
Some spacing is added to account for the longest channel
names that display (before truncation occurs) so that
columns are always properly aligned.
ASTERISK-29895 #close
patches:
61205_misaligned2.patch submitted by Birger Harzenetter (license 5870)
Change-Id: I450ce6bb81157b9d6d149007e53b749f237b6d9f
Adding information in the readme about running the install_preqreq script to install components that the ./configure script might indicate as missing.
ASTERISK-29976 #close
Change-Id: Ic287b46300168729838bddd8f9265e98fc22bce6
There is work going on to update our OpenSSL usage to avoid the
deprecated functions but in the meantime make it possible to compile
in devmode.
Change-Id: Ib082eb8b3751f0185d8aa8fe127da664c93f0726
The XML documentation for the SET MUSIC AGI
command is invalid, as the parameter does not
have a name and the on/off enum options for
the on/off argument are listed separately, which
is incorrect. The cumulative effect of these currently
is that the Asterisk Wiki documentation for SET MUSIC
is broken and external documentation generators crash
on SET MUSIC due to the malformed documentation.
These issues are corrected so that the documentation
can be successfully parsed as with other similar AGI
commands.
ASTERISK-29939 #close
ASTERISK-28891 #close
Change-Id: I8c3d59897531bcbc401cbc7b00c9e2829dcb35f8
(cherry picked from commit 37ece75677)
ASTERISK_22025 introduced a regression that shows
the host IP and port as the perceived IP and port
again, as opposed to showing the actual perceived
address. This fixes this by showing the correct
information.
ASTERISK-29048 #close
Change-Id: I0ad3e25bc6b449e83ce72ea5d1a1cdba72aa304a
Change RTP timer behavior for detecting RTP only after two-way
SDP channel establishment. Ignore detecting after receiving 183
with SDP or while direct media is used.
Make rtp_timeout and rtp_timeout_hold options consistent to rtptimeout
and rtpholdtimeout options in chan_sip.
ASTERISK-26689 #close
ASTERISK-29929 #close
Change-Id: I07326d5b9c40f25db717fd6075f6f3a8d77279eb
