This changes the way that we handle adding changes to CHANGES and
UPGRADE.txt. The reason for this is because whenever someone needed to
make a change to one of these files and someone else had already done
so, you would run into merge conflicts. With this new setup, there will
never be merge conflicts since all changes will be documented in the
doc/<file>-staging directory. The release script is now responsible for
merging all of these changes into the appropriate files.
There is a special format that these files have to follow in order to be
parsed. The files do not need to have a meaningful name, but it is
strongly recommended. For example, if you made a change to pjsip, you
may have something like this "res_pjsip_relative_title", where
"relative_title" is something more descriptive than that. Inside each
file, you will need a subject line for your change, followed by a
description. There can be multiple subject lines. The file may look
something like this:
Subject: res_pjsip
Subject: Core
A description that explains the changes made and why. The release
script will handle the bulleting and section separators!
You can still separate with new lines within your
description.
The headers ("Subject" and "Master-Only") are case sensative, but the
value for "Master-Only" ("true" or "True") is not.
For more information, check out the wiki page:
https://wiki.asterisk.org/wiki/display/AST/CHANGES+and+UPGRADE.txt
ASTERISK-28111 #close
Change-Id: I19cf4b569321c88155a65e9b0b80f6d58075dd47
chan_sip will always ignore 183 responses that do not contain SDP
however, chan_pjsip will currently always translate it into a
183 with SDP. This new flag allows chan_pjsip to have the same
behavior as chan_sip.
ASTERISK-28322 #close
Change-Id: If81cfaa17c11b6ac703e3d71696f259d86c6be4a
Added the ability to move between Stasis applications within Stasis.
This can be done by calling 'move' in an application, providing (at
minimum) the channel's id and the application to switch to. If the
application is not registered or active, nothing will happen and the
channel will remain in the current application, and an event will be
triggered to let the application know that the move failed. The event
name is "ApplicationMoveFailed", and provides the "destination" that the
channel was attempting to move to, as well as the usual channel
information. Optionally, a list of arguments can be passed to the
function call for the receiving application. A full example of a 'move'
call would look like this:
client.channels.move(channelId, app, appArgs)
The control object used to control the channel in Stasis can now switch
which application it belongs to, rather than belonging to one Stasis
application for its lifetime. This allows us to use the same control
object instead of having to tear down the current one and create
another.
ASTERISK-28267 #close
Change-Id: I43d12b10045a98a8d42541889b85695be26f288a
This module allows presence subscriptions to voicemail boxes. This
allows common BLF keys to act as voicemail waiting indicators.
ASTERISK-28301
Change-Id: I62a246c24f3d7d432e33e22d7a4a57c15c292fdd
To prevent one subsystem's taskprocessors from causing others
to stall, new capabilities have been added to taskprocessors.
* Any taskprocessor name that has a '/' will have the part
before the '/' saved as its "subsystem".
Examples:
"sorcery/acl-0000006a" and "sorcery/aor-00000019"
will be grouped to subsystem "sorcery".
"pjsip/distributor-00000025" and "pjsip/distributor-00000026"
will bn grouped to subsystem "pjsip".
Taskprocessors with no '/' have an empty subsystem.
* When a taskprocessor enters high-water alert status and it
has a non-empty subsystem, the subsystem alert count will
be incremented.
* When a taskprocessor leaves high-water alert status and it
has a non-empty subsystem, the subsystem alert count will be
decremented.
* A new api ast_taskprocessor_get_subsystem_alert() has been
added that returns the number of taskprocessors in alert for
the subsystem.
* A new CLI command "core show taskprocessor alerted subsystems"
has been added.
* A new unit test was addded.
REMINDER: The taskprocessor code itself doesn't take any action
based on high-water alerts or overloading. It's up to taskprocessor
users to check and take action themselves. Currently only the pjsip
distributor does this.
* A new pjsip/global option "taskprocessor_overload_trigger"
has been added that allows the user to select the trigger
mechanism the distributor uses to pause accepting new requests.
"none": Don't pause on any overload condition.
"global": Pause on ANY taskprocessor overload (the default and
current behavior)
"pjsip_only": Pause only on pjsip taskprocessor overloads.
* The core pjsip pool was renamed from "SIP" to "pjsip" so it can
be properly grouped into the "pjsip" subsystem.
* stasis taskprocessor names were changed to "stasis" as the
subsystem.
* Sorcery core taskprocessor names were changed to "sorcery" to
match the object taskprocessors.
Change-Id: I8c19068bb2fc26610a9f0b8624bdf577a04fcd56
Event type filtering is now enabled, and configurable per application. An app is
now able to specify which events are sent to the application by configuring an
allowed and/or disallowed list(s). This can be done by issuing the following:
PUT /applications/{applicationName}/eventFilter
And then enumerating the allowed/disallowed event types as a body parameter.
ASTERISK-28106
Change-Id: I9671ba1fcdb3b6c830b553d4c5365aed5d588d5b
At AstriCon, there was a strong desire for the ability to completely
bypass dialplan when using ARI. This is possible through the automatic
creation of a context and a couple of extensions whenever an application
is started.
For example, if you have an application named 'ari-example', a context
named 'stasis-ari-example' will be automatically created whenever this
application is started as long as one does not already exist. Two
extensions (a match-all extension for Stasis and a 'h' extension) are
created within this context. Any endpoint that registers to Asterisk
within this context will send all calls to the corresponding Stasis
application. When the application is destroyed, the context is removed.
ASTERISK-28104 #close
Change-Id: Ie35bd93075e05b05e3ae129a83c9426931b7ebac
Testing revealed that the cache added no benefit but that it could
consume excessive memory.
Two new index related functions were created:
ast_sounds_get_index_for_file() and ast_media_index_update_for_file()
which restrict index updating to specific sound files.
The original ast_sounds_get_index() and ast_media_index_update()
calls are still available but since they no longer cache the results
internally, developers should re-use an index they may already have
instead of calling ast_sounds_get_index() repeatedly. If information
for only a single file is needed, ast_sounds_get_index_for_file()
should be called instead of ast_sounds_get_index().
The media_index directory scan code was elimininated in favor of
using the existing ast_file_read_dirs() function.
Since there's no more cache, ast_sounds_index_init now only
registers the sounds cli commands instead of generating the
initial index and subscribing to stasis format register/unregister
messages.
"sounds" is no longer a valid target for the "module reload"
command.
Both the sounds cli commands and the sounds ari resources were
refactored to only call ast_sounds_get_index() once per invocation
and to use ast_sounds_get_index_for_file() when a specific sound
file is requested.
Change-Id: I1cef327ba1b0648d85d218b70ce469ad07f4aa8d
You can now define an "aliases" context in voicemail.conf
whose entries point to actual mailboxes. These can be used anywhere
the mailbox is specified.
Example:
[general]
aliasescontext = myaliases
[default]
1234 = yadayada
[myaliases]
4321@devices = 1234@default
Now you can use 4321@devices to refer to the 1234@default mailbox.
This can be useful to provide channel drivers with constant
mailbox specifications such as <extension>@devices leaving
app_voicemail to control exactly which mailbox the alias points to.
Now, only voicemail has to be reloaded to make changes instead of
individual channel drivers which are usually more expensive to
reload.
Change-Id: I395b9205c91523a334fe971be0d1de4522067b04
The commit I2f97ebfa79969a36a97bb7b9afd5b6268cf1a07d removed sending out
the ContactStatus AMI event when a contact is updated.
Thist change broke things which rely on old behavior.
This patch adds a new PJSIP global configuration option
'send_contact_status_on_update_registration' to be able to preserve old
ContactStatus behavior.
By default new behavior, i.e. the ContactStatus event will not be sent when a
device refreshes its registration.
Change-Id: I706adf7584e7077eb6bde6d9799ca408bc82ce46
This is how features behaved up through Asterisk 11, but was changed
when the new bridging framework was implemented in Asterisk 12.
Reported by rrittgarn in #asterisk.
Change-Id: I72cf86223947a8118c75f46e2c603dbc11e3125b
We've been seeing crashes in libbfd when we attempt to generate
a stack trace from multiple threads. It turns out that libbfd
is NOT thread-safe. It can cache the bfd structure and give it to
multiple threads without protecting itself. To get around this,
we've added a global mutex around the bfd functions and also have
refactored the use of those functions to be more efficient and
to provide more information about inlined functions.
Also added a few more tests to test_pbx.c. One just calls
ast_assert() and the other calls ast_log_backtrace(). Neither are
run by default.
WARNING: This change necessitated changing the return value of
ast_bt_get_symbols() from an array of strings to a VECTOR of
strings. However, the use of this function outside Asterisk is not
likely.
ASTERISK-28140
Change-Id: I79d02862ddaa2423a0809caa4b3b85c128131621
New dialplan function PJSIP_PARSE_URI added to parse an URI and return
a specified part of the URI.
This is useful when need to get part of the URI instead of cutting it
using a CUT function.
For example to get 'user' part of Remote URI
${PJSIP_PARSE_URI(${CHANNEL(pjsip,remote_uri)},user)}
ASTERISK-28144 #close
Change-Id: I5d828fb87f6803b6c1152bb7b44835f027bb9d5a
If multiple [globals] sections are used (for example via separate
included files), only the first one is processed. This can result in
lost global variables when using a modular extensions.conf.
ASTERISK-28146 #close
Change-Id: Iaac810c0a7c4d9b1bf8989fcc041cdb910ef08a0
This patch adds new options 'trust_connected_line' and 'send_connected_line'
to the endpoint.
The option 'trust_connected_line' is to control if connected line updates
are accepted from this endpoint.
The option 'send_connected_line' is to control if connected line updates
can be sent to this endpoint.
The default value is 'yes' for both options.
Change-Id: I16af967815efd904597ec2f033337e4333d097cd
