This patch fixes a few compile warnings/errors that now occur when using gcc
10+.
Also, the Makefile.rules check to turn off partial inlining in gcc versions
greater or equal to 8.2.1 had a bug where it only it only checked against
versions with at least 3 numbers (ex: 8.2.1 vs 10). This patch now ensures
any version above the specified version is correctly compared.
Change-Id: I54718496eb0c3ce5bd6d427cd279a29e8d2825f9
In contrast to RFC 3551, section 4.2, several SIP/RTP clients misbehave
severly (up to crashing). This patch adds another smoother for the audio
received via bt. Therefore the audio frames sent to the core will be
CHANNEL_FRAME_SIZE.
ASTERISK-28832 #close
Change-Id: Ic5f9e2f35868ae59cc9356afbd1388b779a1267f
Warnings without this:
res_config_mysql.c: In function 'update2_mysql':
res_config_mysql.c:741:15: warning: format '%llu' expects argument of type
'long long unsigned int', but argument 6 has type 'my_ulonglong'
{aka 'long unsigned int'} [-Wformat=]
ast_debug(1, "MySQL RealTime: Updated %llu rows on table: %s\n",
numrows, tablename);
(reformatted for readability within line-wrap)
Change-Id: I2af4d419a37c1a7eeee750cf9ae4a9a2b3a37fd3
Instead of trying to use the defined MySQL client version from the
header use a configure check to determine whether the bool or my_bool
type should be used for defining a boolean.
ASTERISK-28604
Change-Id: Id2225b3785115de074c50c123ff1a68005b4a9c7
MySql 8.0.1 replaced the "my_bool" type with "bool" so an #if
was added to use "bool" with MYSQL_VERSION_ID >= 80001.
ASTERISK-28604
Change-Id: I66a28d8f0011e33774edee13a6f8efd2302bb920
Most were in comments. A couple were in warning messages.
Pointed out by Jonathan H on the Asterisk users mailing list.
Change-Id: I6286939dff5d0a27a2758140570106f1cb351855
Add support to handle caller-ID names ("cnam") in addition to caller-ID
numbers. The prior code ignored the caller-ID name altogether, and
used the local name for the cell phone (e.g. "my-iphone") in its place.
Note: as of this writing, at least some Android phones don't pass cnam to
us. This can be seen by issuing "core set debug 2" in the CLI and watching
the "CLIP" record when a call comes in. If cnam isn't in the CLIP record,
there's nothing we can do to provide one. We'll provide a null cnam field,
so later Asterisk processes know to try other sources (e.g. cidname database,
OpenCNAM, etc.).
Reported by: Brian Martin
Tested by: Brian Martin
ASTERISK-27726
Change-Id: I89490d85fa406c36261879c50ae5e65595538ba5
This fixes build warnings found by GCC 8. In some cases format
truncation is intentional so the warning is just suppressed.
ASTERISK-27824 #close
Change-Id: I724f146cbddba8b86619d4c4a9931ee877995c84
Call ooManualProgress/Ringback outside of ast_debug function
when ooh323 debugging is on
ASTERISK-27812 #close
ASTERISK-26893 #close
Reported by: Dimos, Marco Giordani
Change-Id: I5873762e4f05824e7b6e94a19dd4eb56adbbbb79
If it is not defined, it will add MYSQL_PORT definition. After some
research on MySQL/MariaDB development tree, I couldn't find any reference
to MYSQL_PORT definition in include files.
ASTERISK-27782 #close
Change-Id: Ieee56c836fc2e8bd021c456145bba04c6068bb77
Checking option_debug directly is incorrect as it ignores file/module
specific debug settings. This system-wide change replaces nearly all
direct checks for option_debug with the DEBUG_ATLEAST macro.
Change-Id: Ic342d4799a945dbc40ac085ac142681094a4ebf0
When the MYSQL_OPT_RECONNECT option is enabled, the MySQL client API
will transparently reconnect when it needs to. Ideally this simplifies
our code, but when this reconnection occurs all connection state is
lost. Because we are not notified that this has happened, we don't know
to set our character set again (with "SET NAMES 'xyz'").
Rather than calling SET NAMES, we instead set the MYSQL_SET_CHARSET_NAME
option which will do it for us under the hood on each connect. This
option has been present in the MySQL C API for at least 15 years, so it
should be safe for most installations.
I also snuck a few other changes into this patch:
* Default the MySQL port to MYSQL_PORT (3306) instead of 0 if it's not
defined.
* Fix some erroneous and/or silly checks on the contents of the
configuration ast_str values.
ASTERISK-27366 #close
Reported by: Halil İbrahim YILDIZ
Change-Id: I36bf8dc5d5f83584e803b3b1a151dea9396ab8f5
Fix instances of:
* Retreive
* Recieve
* other then
* different then
* Repeated words ("the the", "an an", "and and", etc).
* othterwise, teh
ASTERISK-24198 #close
Change-Id: I3809a9c113b92fd9d0d9f9bac98e9c66dc8b2d31
Fixes a memory corruption issue after a reload of cdr_mysql.
Issue was accidentally included in 747beb1ed1 .
ASTERISK-27270 #close
Change-Id: I90b6a9d18710c0f9009466370bd5f4bac5d5d12e
GCC 7 has added capability to produce warnings, this fixes most of those
warnings. The specific warnings are disabled in a few places:
* app_voicemail.c: truncation of paths more than 4096 chars in many places.
* chan_mgcp.c: callid truncated to 80 chars.
* cdr.c: two userfields are combined to cdr copy, fix would break ABI.
* tcptls.c: ignore use of deprecated method SSLv3_client_method().
ASTERISK-27156 #close
Change-Id: I65f280e7d3cfad279d16f41823a4d6fddcbc4c88
Rather than removing format_mp3 from ALL_C_MODS (which caused format_mp3
to not show up in menuselect), use .PHONY targets when the necessary
source files are not present.
ASTERISK-23951
Reported by: Tzafrir Cohen
Change-Id: I0a7512c51acc9e86043671795020b0de725bd9e8
Cleaned up some of the incorrect uses of fread() and fwrite(), mostly in
the format modules. Neither of these functions will ever return a value
less than 0, which we were checking for in some cases.
I've introduced a fair amount of duplication in the format modules, but
I plan to change how format modules work internally in a subsequent
patch set, so this is simply a stop-gap.
Change-Id: I8ca1cd47c20b2c0b72088bd13b9046f6977aa872
In all non-pbx modules, AST_MODULE_LOAD_FAILURE has been changed
to AST_MODULE_LOAD_DECLINE. This prevents asterisk from exiting
if a module can't be loaded. If the user wishes to retain the
FAILURE behavior for a specific module, they can use the "require"
or "preload-require" keyword in modules.conf.
A new API was added to logger: ast_is_logger_initialized(). This
allows asterisk.c/check_init() to print to the error log once the
logger subsystem is ready instead of just to stdout. If something
does fail before the logger is initialized, we now print to stderr
instead of stdout.
Change-Id: I5f4b50623d9b5a6cb7c5624a8c5c1274c13b2b25
All of the realtime backends create artificial ast_categorys to pass
back into the core as query results. These categories have no filename
or line number information associated with them and the backends differ
slightly on how they create them. So create a couple helper macros to
help make things more consistent.
Also updated the call sites to remove redundant error messages about
memory allocation failure.
Note that res_config_ldap sets the category filename to the 'table name'
but that is not read by anything in the core, so I've dropped it.
Change-Id: I3a1fd91e0c807dea1ce3b643b0a6fe5be9002897
The realtime framework allows for components to look up values using a
LIKE clause with similar syntax to SQL's. pbx_realtime uses this
functionality to search for pattern matching extensions that start with
an underscore (_).
When passing an underscore to SQL's LIKE clause, it will be interpreted
as a wildcard matching a single character and therefore needs to be
escaped. It is (for better or for worse) the responsibility of the
component that is querying realtime to escape it with a backslash before
passing it in. Some RDBMs support escape characters by default, but the
SQL92 standard explicitly says that there are no escape characters
unless they are specified with an ESCAPE clause, e.g.
SELECT * FROM table WHERE column LIKE '\_%' ESCAPE '\'
This patch instructs 3 backends - res_config_mysql, res_config_pgsql,
and res_config_sqlite3 - to use the ESCAPE clause where appropriate.
Looking through documentation and source tarballs, I was able to
determine that the ESCAPE clause is supported in:
MySQL 5.0.15 (released 2005-10-22 - earliest version available from
archives)
PostgreSQL 7.1 (released 2001-04-13)
SQLite 3.1.0 (released 2005-01-21)
The versions of the relevant libraries that we depend on to access MySQL
and PostgreSQL will not work on versions that old, and I've added an
explicit check in res_config_sqlite3 to only use the ESCAPE clause when
we have a sufficiently new version of SQLite3.
res_config_odbc already handles the escape characters appropriately, so
no changes were required there.
ASTERISK-15858 #close
Reported by: Humberto Figuera
ASTERISK-26057 #close
Reported by: Stepan
Change-Id: I93117fbb874189ae819f4a31222df7c82cd20efa
The two reasons why it might be used are that some systems do not
implement strerror in thread safe manner, and that strerror_r returns
the error code in the string in case there's no error message.
However, all of asterisk elsewhere uses strerror() and assumes it
to be thread safe. And in chan_mobile the errno is also explicitly
printed so neither of the above reasons are valid.
The reasoning to remove usage is that there are actually two versions
of strerror_r: XSI and GNU. They are incompatible in their return
value, and there's no easy way to figure out which one is being
used. glibc gives you the GNU version if _GNU_SOURCE is defined,
but the same feature test macro is needed for other symbols. On
all other systems you assumedly get XSI symbol, and compilation warnings
as well as non-working error printing.
Thus the easiest solution is to just remove strerror_r and use
strerror as rest of the code. Alternative is to introduce ast_strerror
in separate translation unit so it can request the XSI symbol in
glibc case, and replace all usage of strerror.
Change-Id: I84d35225b5642d85d48bc35fdf399afbae28a91d
Fix logic on read second part of H.225 packet. There was infinite loop on
wrong connections due to read before poll.
Change-Id: I42b4bf75c46e4a5c5df5c5ca1f0bd74b8944e7ff
Unlike any of the other database drivers, res_config_mysql checks that
the table definition matches the requirements for every insert and
update statement. Since all requirements are forced to 'char', any
column that isn't a char, like ps_contacts' expiration_time,
qualify_timeout, etc., will throw a warning. It's kinda harmless but
very misleading. Since no other driver does those checks on insert
or update, they've been removed from res_config_mysql. Also, all
the logic that actually attempted to ALTER the table to fix the issue
has been removed. With the move to alembic, the auto-alter
functionality is not only unnecessary, it's also dangerous.
The other issue is that res_config_mysql calls the mysql_insert_id
function inside store_mysql. Presumably the intention was to return
the number of rows inserted DESPITE A NOTE IN THE CODE THAT THE VALUE
IS NON_PORTABLE AND MAY CHANGE. That value is then returned to
config realtime as the number of rows inserted. Guess what? The value
changed. It now only returns the number of rows inserted if there's an
auto increment column on the table, which ps_contacts doesn't have.
Otherwise it returns 0. So now, the insert worked but we tell config
realtime and sorcery that no rows were inserted. That call to
mysql_insert_id was removed and we now always return 1 if the insert
succeeded. We're only inserting 1 row at a time anyway. If the insert
fails, we still return -1.
ASTERISK-26362 #close
Reported-by: Carlos Chavez
Change-Id: I83ce633efdb477b03c8399946994ee16fefceaf4
* Make 'cdrzone=UTC' work properly.
* Fix the documentation of cdr_mysql.conf: it's cdrzone and not timezone
ASTERISK-26359 #close
Change-Id: I2a6f67b71bbbe77cac31a34d0bbfb1d67c933778
This updates func_channel.c and main/message.c to use a generic xpointer
include instead of including info from each channel driver. Now the
name attribute of info is CHANNEL or CHANNEL_EXAMPLES to be included in
documentation for func_channel. Setting the name attribute of info to
MessageToInfo or MessageFromInfo causes it to be included in the
MessageSend application and AMI action.
Change-Id: I89fd8276a3250824241a618009714267d3a8d1ea
* Following the example of the PJSIP channel driver, the channel
technology specific documentation has been moved to the respective
channel drivers that provide that functionality. This has the benefit
of locating the documentation of items with those modules that provide
it.
* Examples of using the CHANNEL function for both standard items as well
as for PJSIP have been added.
* The 'max_forwards' standard item has been documented.
Change-Id: Ifaa79a232c8ac99cf8da6ef6cc7815d398b1b79b
In several internal library projects, the files are archived with the help of
'ar cr'. Only the projects editline and the Objective Open H.323 stack
implementation in C (ooh323c) use 'ar cru' instead. Recently, some platforms
changed the default parameters of AR which creates "/usr/bin/ar: `u' modifier
ignored since `D' is the default (see `U')". For consistency and to avoid this
message all projects use 'ar cr' now.
ASTERISK-26091 #close
Change-Id: I710a9b1c01c1b5a1931a646098c044c8161ead40
