chan_oss: Remove deprecated module.

ASTERISK-29593

Change-Id: Ib53a42ad974c63871344b95078c61c188e43da99

build_tools/menuselect-deps.in

@@ -46,7 +46,6 @@ OGG=@PBX_OGG@
 OPUS=@PBX_OPUS@
 OPUSFILE=@PBX_OPUSFILE@
 OSPTK=@PBX_OSPTK@
-OSS=@PBX_OSS@
 PGSQL=@PBX_PGSQL@
 PJPROJECT=@PBX_PJPROJECT@
 POPT=@PBX_POPT@

configs/samples/oss.conf.sample

@@ -1,152 +0,0 @@
-;
-; Automatically generated from ../channels/chan_oss.c
-;
-
-[general]
-    ; General config options, with default values shown.
-    ; You should use one section per device, with [general] being used
-    ; for the first device and also as a template for other devices.
-    ;
-    ; All but 'debug' can go also in the device-specific sections.
-    ;
-    ; debug = 0x0		; misc debug flags, default is 0
-
-    ; Set the device to use for I/O
-    ; device = /dev/dsp
-
-    ; Optional mixer command to run upon startup (e.g. to set
-    ; volume levels, mutes, etc.
-    ; mixer =
-
-    ; Software mic volume booster (or attenuator), useful for sound
-    ; cards or microphones with poor sensitivity. The volume level
-    ; is in dB, ranging from -20.0 to +20.0
-    ; boost = n			; mic volume boost in dB
-
-    ; Set the callerid for outgoing calls
-    ; callerid = John Doe <555-1234>
-
-    ; autoanswer = no		; no autoanswer on call
-    ; autohangup = yes		; hangup when other party closes
-    ; extension = s		; default extension to call
-    ; context = default		; default context for outgoing calls
-    ; language = ""		; default language
-
-    ; If you set overridecontext to 'yes', then the whole dial string
-    ; will be interpreted as an extension, which is extremely useful
-    ; to dial SIP, IAX and other extensions which use the '@' character.
-    ; The default is 'no' just for backward compatibility, but the
-    ; suggestion is to change it.
-    ; overridecontext = no	; if 'no', the last @ will start the context
-				; if 'yes' the whole string is an extension.
-
-    ; low level device parameters in case you have problems with the
-    ; device driver on your operating system. You should not touch these
-    ; unless you know what you are doing.
-    ; queuesize = 10		; frames in device driver
-    ; frags = 8			; argument to SETFRAGMENT
-
-    ; ----------------------------- JITTER BUFFER CONFIGURATION --------------------------
-    ; jbenable = yes              ; Enables the use of a jitterbuffer on the receiving side of an
-                                  ; OSS channel. Defaults to "no". An enabled jitterbuffer will
-                                  ; be used only if the sending side can create and the receiving
-                                  ; side can not accept jitter. The OSS channel can't accept jitter,
-                                  ; thus an enabled jitterbuffer on the receive OSS side will always
-                                  ; be used if the sending side can create jitter.
-
-    ; jbmaxsize = 200             ; Max length of the jitterbuffer in milliseconds.
-
-    ; jbresyncthreshold = 1000    ; Jump in the frame timestamps over which the jitterbuffer is
-                                  ; resynchronized. Useful to improve the quality of the voice, with
-                                  ; big jumps in/broken timestamps, usually sent from exotic devices
-                                  ; and programs. Defaults to 1000.
-
-    ; jbimpl = fixed              ; Jitterbuffer implementation, used on the receiving side of an OSS
-                                  ; channel. Two implementations are currently available - "fixed"
-                                  ; (with size always equals to jbmax-size) and "adaptive" (with
-                                  ; variable size, actually the new jb of IAX2). Defaults to fixed.
-
-    ; jbtargetextra = 40          ; This option only affects the jb when 'jbimpl = adaptive' is set.
-                                  ; The option represents the number of milliseconds by which the new
-                                  ; jitter buffer will pad its size. the default is 40, so without
-                                  ; modification, the new jitter buffer will set its size to the jitter
-                                  ; value plus 40 milliseconds. increasing this value may help if your
-                                  ; network normally has low jitter, but occasionally has spikes.
-
-    ; jblog = no                  ; Enables jitterbuffer frame logging. Defaults to "no".
-    ; ----------------------------------------------------------------------------------
-
-; below is an entry for a second console channel
-; [card1]
-    ; device = /dev/dsp1	; alternate device
-
-; Below are the settings to support video. You can include them
-; in your general configuration as [general](+,video)
-; The parameters are all available through the CLI as "console name value"
-; Section names used here are only examples.
-
-[my_video](!)      ; you can just include in your config
-    videodevice = /dev/video0	; uses your V4L webcam as video source
-    videodevice = X11		; X11 grabber. Dragging on the local display moves the origin.
-    videocodec = h263		; also h261, h263p, h264, mpeg4, ...
-
-    ; video_size is the geometry used by the encoder.
-    ; Depending on the codec your choice is restricted.
-    video_size = 352x288	; the format WIDTHxHEIGHT is also ok
-    video_size = cif		; sqcif, qcif, cif, qvga, vga, ...
-
-    ; You can also set the geometry used for the camera, local display and remote display.
-    ; The local window is on the right, the remote window is on the left.
-    ; Right clicking with the mouse on a video window increases the size,
-    ; center-clicking reduces the size.
-    camera_size = cif
-    remote_size = cif
-    local_size = qcif
-
-    bitrate = 60000             ; rate told to ffmpeg.
-    fps = 5                     ; frames per second from the source.
-    ; qmin = 3                  ; quantizer value passed to the encoder.
-
-; The keypad is made of an image (in any format supported by SDL_image)
-; and some configuration entries indicating the location and function of buttons.
-; These entries can also be contained in the comment field of the image,
-; which is a lot more convenient to manage.
-; E.g. for jpeg you can write them with wrjpgcom (part of libjpeg).
-; The format to define keys is
-;	region = <event> <shape> x0 y0 x1 y1 h
-; where <event> is the event to be generated (a digit, pickup, hangup,...)
-; <shape> is the shape of the region (currently 'rect' and 'circle' are
-; supported, the latter is really an ellipse),  x0 y0 x1 y1 are the
-; coordinates of the base of the rectangle or main diameter of the ellipse,
-; (they can be rotated) while h is the height of the rectangle or the other
-; diameter of the ellipse.
-;
-[my_skin](!)
-    keypad = /tmp/keypad.jpg
-    region = 1 rect   19  18    67  18  28
-    region = 2 rect   84  18   133  18  28
-    region = 3 rect  152  18   201  18  28
-    region = 4 rect   19  60    67  60  28
-    region = 5 rect   84  60   133  60  28
-    region = 6 rect  152  60   201  60  28
-    region = 7 rect   19 103    67 103  28
-    region = 8 rect   84 103   133 103  28
-    region = 9 rect  152 103   201 103  28
-    region = * rect   19 146    67 146  28
-    region = 0 rect   84 146   133 146  28
-    region = # rect  152 146   201 146  28
-    region = pickup rect  229 15  267 15 40
-    region = hangup rect  230 66  270 64 40
-    region = mute circle  232 141 264 141 33
-    region = sendvideo circle  235 185 266 185 33
-    region = autoanswer rect 228 212 275 212 50
-
-; another skin with entries for the keypad and a small font
-; to write to the message boards in the skin.
-[skin2](!)
-    keypad = /tmp/kpad2.jpg
-    keypad_font = /tmp/font.png
-
-; to add video support, uncomment this and remember to install
-; the keypad and keypad_font files to the right place
-; [general](+,my_video,skin2)

configure

@@ -999,10 +999,6 @@ PBX_PGSQL
 PGSQL_DIR
 PGSQL_INCLUDE
 PGSQL_LIB
-PBX_OSS
-OSS_DIR
-OSS_INCLUDE
-OSS_LIB
 PBX_OSPTK
 OSPTK_DIR
 OSPTK_INCLUDE
@@ -1296,7 +1292,6 @@ BUILD_OS
 BUILD_VENDOR
 BUILD_CPU
 BUILD_PLATFORM
-astcachedir
 astvarrundir
 astlogdir
 astspooldir
@@ -1309,6 +1304,7 @@ astmoddir
 astlibdir
 astheaderdir
 astetcdir
+astcachedir
 astsbindir
 EGREP
 GREP
@@ -1349,6 +1345,7 @@ infodir
 docdir
 oldincludedir
 includedir
+runstatedir
 localstatedir
 sharedstatedir
 sysconfdir
@@ -1425,7 +1422,6 @@ with_openr2
 with_opus
 with_opusfile
 with_osptk
-with_oss
 with_postgres
 with_beanstalk
 with_pjproject
@@ -1538,6 +1534,7 @@ datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
 docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
@@ -1790,6 +1787,15 @@ do
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
 
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
   -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
     ac_prev=sbindir ;;
   -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
@@ -1927,7 +1933,7 @@ fi
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
+		libdir localedir mandir runstatedir
 do
   eval ac_val=\$$ac_var
   # Remove trailing slashes.
@@ -2080,6 +2086,7 @@ Fine tuning of the installation directories:
   --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
   --libdir=DIR            object code libraries [EPREFIX/lib]
   --includedir=DIR        C header files [PREFIX/include]
   --oldincludedir=DIR     C header files for non-gcc [/usr/include]
@@ -2188,7 +2195,6 @@ Optional Packages:
   --with-opus=PATH        use Opus files in PATH
   --with-opusfile=PATH    use Opusfile files in PATH
   --with-osptk=PATH       use OSP Toolkit files in PATH
-  --with-oss=PATH         use Open Sound System files in PATH
   --with-postgres=PATH    use PostgreSQL files in PATH
   --with-beanstalk=PATH   use Beanstalk Job Queue files in PATH
   --with-pjproject=PATH   use PJPROJECT files in PATH
@@ -10848,6 +10854,7 @@ fi
 
 
 
+
     MISDN_DESCRIP="mISDN user"
     MISDN_OPTION="misdn"
     PBX_MISDN=0
@@ -11232,38 +11239,6 @@ fi
 
 
 
-    OSS_DESCRIP="Open Sound System"
-    OSS_OPTION="oss"
-    PBX_OSS=0
-
-# Check whether --with-oss was given.
-if test "${with_oss+set}" = set; then :
-  withval=$with_oss;
-	case ${withval} in
-	n|no)
-	USE_OSS=no
-	# -1 is a magic value used by menuselect to know that the package
-	# was disabled, other than 'not found'
-	PBX_OSS=-1
-	;;
-	y|ye|yes)
-	ac_mandatory_list="${ac_mandatory_list} OSS"
-	;;
-	*)
-	OSS_DIR="${withval}"
-	ac_mandatory_list="${ac_mandatory_list} OSS"
-	;;
-	esac
-
-fi
-
-
-
-
-
-
-
-
     PGSQL_DESCRIP="PostgreSQL"
     PGSQL_OPTION="postgres"
     PBX_PGSQL=0
@@ -14688,7 +14663,7 @@ else
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -14734,7 +14709,7 @@ else
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -14758,7 +14733,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -14803,7 +14778,7 @@ else
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -14827,7 +14802,7 @@ rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
     We can't simply define LARGE_OFF_T to be 9223372036854775807,
     since some C++ compilers masquerading as C compilers
     incorrectly reject 9223372036854775807.  */
-#define LARGE_OFF_T (((off_t) 1 << 62) - 1 + ((off_t) 1 << 62))
+#define LARGE_OFF_T ((((off_t) 1 << 31) << 31) - 1 + (((off_t) 1 << 31) << 31))
   int off_t_is_large[(LARGE_OFF_T % 2147483629 == 721
 		       && LARGE_OFF_T % 2147483647 == 1)
 		      ? 1 : -1];
@@ -16127,6 +16102,8 @@ main ()
     if (*(data + i) != *(data3 + i))
       return 14;
   close (fd);
+  free (data);
+  free (data3);
   return 0;
 }
 _ACEOF
@@ -24215,216 +24192,6 @@ fi
 
 
 
-# possible places for oss definitions
-
-if test "x${PBX_OSS}" != "x1" -a "${USE_OSS}" != "no"; then
-   pbxlibdir=""
-   # if --with-OSS=DIR has been specified, use it.
-   if test "x${OSS_DIR}" != "x"; then
-      if test -d ${OSS_DIR}/lib; then
-         pbxlibdir="-L${OSS_DIR}/lib"
-      else
-         pbxlibdir="-L${OSS_DIR}"
-      fi
-   fi
-
-      # empty lib, assume only headers
-      AST_OSS_FOUND=yes
-
-
-   # now check for the header.
-   if test "${AST_OSS_FOUND}" = "yes"; then
-      OSS_LIB="${pbxlibdir} -lossaudio "
-      # if --with-OSS=DIR has been specified, use it.
-      if test "x${OSS_DIR}" != "x"; then
-         OSS_INCLUDE="-I${OSS_DIR}/include"
-      fi
-      OSS_INCLUDE="${OSS_INCLUDE} "
-
-         # check for the header
-         ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
-         CPPFLAGS="${CPPFLAGS} ${OSS_INCLUDE}"
-         ac_fn_c_check_header_mongrel "$LINENO" "linux/soundcard.h" "ac_cv_header_linux_soundcard_h" "$ac_includes_default"
-if test "x$ac_cv_header_linux_soundcard_h" = xyes; then :
-  OSS_HEADER_FOUND=1
-else
-  OSS_HEADER_FOUND=0
-fi
-
-
-         CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
-
-      if test "x${OSS_HEADER_FOUND}" = "x0" ; then
-         OSS_LIB=""
-         OSS_INCLUDE=""
-      else
-
-            # only checking headers -> no library
-            OSS_LIB=""
-
-         PBX_OSS=1
-         cat >>confdefs.h <<_ACEOF
-#define HAVE_OSS 1
-_ACEOF
-
-      fi
-   fi
-fi
-
-
-
-if test "x${PBX_OSS}" != "x1" -a "${USE_OSS}" != "no"; then
-   pbxlibdir=""
-   # if --with-OSS=DIR has been specified, use it.
-   if test "x${OSS_DIR}" != "x"; then
-      if test -d ${OSS_DIR}/lib; then
-         pbxlibdir="-L${OSS_DIR}/lib"
-      else
-         pbxlibdir="-L${OSS_DIR}"
-      fi
-   fi
-
-      # empty lib, assume only headers
-      AST_OSS_FOUND=yes
-
-
-   # now check for the header.
-   if test "${AST_OSS_FOUND}" = "yes"; then
-      OSS_LIB="${pbxlibdir} -lossaudio "
-      # if --with-OSS=DIR has been specified, use it.
-      if test "x${OSS_DIR}" != "x"; then
-         OSS_INCLUDE="-I${OSS_DIR}/include"
-      fi
-      OSS_INCLUDE="${OSS_INCLUDE} "
-
-         # check for the header
-         ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
-         CPPFLAGS="${CPPFLAGS} ${OSS_INCLUDE}"
-         ac_fn_c_check_header_mongrel "$LINENO" "sys/soundcard.h" "ac_cv_header_sys_soundcard_h" "$ac_includes_default"
-if test "x$ac_cv_header_sys_soundcard_h" = xyes; then :
-  OSS_HEADER_FOUND=1
-else
-  OSS_HEADER_FOUND=0
-fi
-
-
-         CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
-
-      if test "x${OSS_HEADER_FOUND}" = "x0" ; then
-         OSS_LIB=""
-         OSS_INCLUDE=""
-      else
-
-            # only checking headers -> no library
-            OSS_LIB=""
-
-         PBX_OSS=1
-         cat >>confdefs.h <<_ACEOF
-#define HAVE_OSS 1
-_ACEOF
-
-      fi
-   fi
-fi
-
-
-
-if test "x${PBX_OSS}" != "x1" -a "${USE_OSS}" != "no"; then
-   pbxlibdir=""
-   # if --with-OSS=DIR has been specified, use it.
-   if test "x${OSS_DIR}" != "x"; then
-      if test -d ${OSS_DIR}/lib; then
-         pbxlibdir="-L${OSS_DIR}/lib"
-      else
-         pbxlibdir="-L${OSS_DIR}"
-      fi
-   fi
-
-      ast_ext_lib_check_save_CFLAGS="${CFLAGS}"
-      CFLAGS="${CFLAGS} "
-      { $as_echo "$as_me:${as_lineno-$LINENO}: checking for oss_ioctl_mixer in -lossaudio" >&5
-$as_echo_n "checking for oss_ioctl_mixer in -lossaudio... " >&6; }
-if ${ac_cv_lib_ossaudio_oss_ioctl_mixer+:} false; then :
-  $as_echo_n "(cached) " >&6
-else
-  ac_check_lib_save_LIBS=$LIBS
-LIBS="-lossaudio ${pbxlibdir}  $LIBS"
-cat confdefs.h - <<_ACEOF >conftest.$ac_ext
-/* end confdefs.h.  */
-
-/* Override any GCC internal prototype to avoid an error.
-   Use char because int might match the return type of a GCC
-   builtin and then its argument prototype would still apply.  */
-#ifdef __cplusplus
-extern "C"
-#endif
-char oss_ioctl_mixer ();
-int
-main ()
-{
-return oss_ioctl_mixer ();
-  ;
-  return 0;
-}
-_ACEOF
-if ac_fn_c_try_link "$LINENO"; then :
-  ac_cv_lib_ossaudio_oss_ioctl_mixer=yes
-else
-  ac_cv_lib_ossaudio_oss_ioctl_mixer=no
-fi
-rm -f core conftest.err conftest.$ac_objext \
-    conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_lib_ossaudio_oss_ioctl_mixer" >&5
-$as_echo "$ac_cv_lib_ossaudio_oss_ioctl_mixer" >&6; }
-if test "x$ac_cv_lib_ossaudio_oss_ioctl_mixer" = xyes; then :
-  AST_OSS_FOUND=yes
-else
-  AST_OSS_FOUND=no
-fi
-
-      CFLAGS="${ast_ext_lib_check_save_CFLAGS}"
-
-
-   # now check for the header.
-   if test "${AST_OSS_FOUND}" = "yes"; then
-      OSS_LIB="${pbxlibdir} -lossaudio "
-      # if --with-OSS=DIR has been specified, use it.
-      if test "x${OSS_DIR}" != "x"; then
-         OSS_INCLUDE="-I${OSS_DIR}/include"
-      fi
-      OSS_INCLUDE="${OSS_INCLUDE} "
-
-         # check for the header
-         ast_ext_lib_check_saved_CPPFLAGS="${CPPFLAGS}"
-         CPPFLAGS="${CPPFLAGS} ${OSS_INCLUDE}"
-         ac_fn_c_check_header_mongrel "$LINENO" "soundcard.h" "ac_cv_header_soundcard_h" "$ac_includes_default"
-if test "x$ac_cv_header_soundcard_h" = xyes; then :
-  OSS_HEADER_FOUND=1
-else
-  OSS_HEADER_FOUND=0
-fi
-
-
-         CPPFLAGS="${ast_ext_lib_check_saved_CPPFLAGS}"
-
-      if test "x${OSS_HEADER_FOUND}" = "x0" ; then
-         OSS_LIB=""
-         OSS_INCLUDE=""
-      else
-
-         PBX_OSS=1
-         cat >>confdefs.h <<_ACEOF
-#define HAVE_OSS 1
-_ACEOF
-
-      fi
-   fi
-fi
-
-
-
 PG_CONFIG=No
 if test "${USE_PGSQL}" != "no"; then
    if test "x${PGSQL_DIR}" != "x"; then

configure.ac

@@ -524,7 +524,6 @@ AST_EXT_LIB_SETUP([OPENR2], [MFR2], [openr2])
 AST_EXT_LIB_SETUP([OPUS], [Opus], [opus])
 AST_EXT_LIB_SETUP([OPUSFILE], [Opusfile], [opusfile])
 AST_EXT_LIB_SETUP([OSPTK], [OSP Toolkit], [osptk])
-AST_EXT_LIB_SETUP([OSS], [Open Sound System], [oss])
 AST_EXT_LIB_SETUP([PGSQL], [PostgreSQL], [postgres])
 AST_EXT_LIB_SETUP([BEANSTALK], [Beanstalk Job Queue], [beanstalk])
 
@@ -2344,11 +2343,6 @@ AST_EXT_LIB_CHECK([BLUETOOTH], [bluetooth], [ba2str], [bluetooth/bluetooth.h])
 
 AST_EXT_LIB_CHECK([BEANSTALK], [beanstalk], [bs_version], [beanstalk.h])
 
-# possible places for oss definitions
-AST_EXT_LIB_CHECK([OSS], [ossaudio], [], [linux/soundcard.h])
-AST_EXT_LIB_CHECK([OSS], [ossaudio], [], [sys/soundcard.h])
-AST_EXT_LIB_CHECK([OSS], [ossaudio], [oss_ioctl_mixer], [soundcard.h])
-
 PG_CONFIG=No
 if test "${USE_PGSQL}" != "no"; then
    if test "x${PGSQL_DIR}" != "x"; then

doc/UPGRADE-staging/chan_oss_removal.txt

@@ -0,0 +1,6 @@
+Subject: chan_oss
+Master-Only: True
+
+This module was deprecated in Asterisk 16
+and is now being removed in accordance with
+the Asterisk Module Deprecation policy.

include/asterisk/autoconfig.h.in

@@ -603,9 +603,6 @@
 /* Define this to indicate the ${OSPTK_DESCRIP} library */
 #undef HAVE_OSPTK
 
-/* Define to 1 if you have the Open Sound System library. */
-#undef HAVE_OSS
-
 /* Define to 1 if your system defines the file flag O_EVTONLY in fcntl.h */
 #undef HAVE_O_EVTONLY
 

makeopts.in

@@ -227,11 +227,6 @@ OPUSFILE_LIB=@OPUSFILE_LIB@
 OSPTK_INCLUDE=@OSPTK_INCLUDE@
 OSPTK_LIB=@OSPTK_LIB@
 
-# ossaudio can optionally use ffmpeg, x11, sdl and sdl_image.
-# Because sdl_image in turn depends on sdl, we don't duplicate the include
-OSS_INCLUDE=@OSS_INCLUDE@ @FFMPEG_INCLUDE@ @SDL_INCLUDE@ @X11_INCLUDE@
-OSS_LIB=@OSS_LIB@ @FFMPEG_LIB@ @SDL_LIB@ @SDL_IMAGE_LIB@ @X11_LIB@
-
 PGSQL_INCLUDE=@PGSQL_INCLUDE@
 PGSQL_LIB=@PGSQL_LIB@
 

menuselect/configure

@@ -696,6 +696,7 @@ infodir
 docdir
 oldincludedir
 includedir
+runstatedir
 localstatedir
 sharedstatedir
 sysconfdir
@@ -777,6 +778,7 @@ datadir='${datarootdir}'
 sysconfdir='${prefix}/etc'
 sharedstatedir='${prefix}/com'
 localstatedir='${prefix}/var'
+runstatedir='${localstatedir}/run'
 includedir='${prefix}/include'
 oldincludedir='/usr/include'
 docdir='${datarootdir}/doc/${PACKAGE}'
@@ -1029,6 +1031,15 @@ do
   | -silent | --silent | --silen | --sile | --sil)
     silent=yes ;;
 
+  -runstatedir | --runstatedir | --runstatedi | --runstated \
+  | --runstate | --runstat | --runsta | --runst | --runs \
+  | --run | --ru | --r)
+    ac_prev=runstatedir ;;
+  -runstatedir=* | --runstatedir=* | --runstatedi=* | --runstated=* \
+  | --runstate=* | --runstat=* | --runsta=* | --runst=* | --runs=* \
+  | --run=* | --ru=* | --r=*)
+    runstatedir=$ac_optarg ;;
+
   -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb)
     ac_prev=sbindir ;;
   -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \
@@ -1166,7 +1177,7 @@ fi
 for ac_var in	exec_prefix prefix bindir sbindir libexecdir datarootdir \
 		datadir sysconfdir sharedstatedir localstatedir includedir \
 		oldincludedir docdir infodir htmldir dvidir pdfdir psdir \
-		libdir localedir mandir
+		libdir localedir mandir runstatedir
 do
   eval ac_val=\$$ac_var
   # Remove trailing slashes.
@@ -1319,6 +1330,7 @@ Fine tuning of the installation directories:
   --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
   --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
   --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
+  --runstatedir=DIR       modifiable per-process data [LOCALSTATEDIR/run]
   --libdir=DIR            object code libraries [EPREFIX/lib]
   --includedir=DIR        C header files [PREFIX/include]
   --oldincludedir=DIR     C header files for non-gcc [/usr/include]